BYM10-xxx, GL41x
www.vishay.com Vishay General Semiconductor
Revision: 11-Dec-13 1Document Number: 88546
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Surface Mount Glass Passivated Junction Rectifier
FEATURES
• Superectifier structure for high reliability condition
• Ideal for automated placement
• Low forward voltage drop
• Low leakage current
• High forward surge capability
• Meets MSL level 1, per J-STD-020, LF maximum peak of
250 °C
• AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in general purpose rectification of power supplies,
inverters, converters and freewheeling diodes for consumer,
automotive and telecommunication.
MECHANICAL DATA
Case: DO-213AB, molded epoxy over glass body
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Two bands indicate cathode end - 1st band
denotes device type and 2nd band denotes repetitive peak
reverse voltage rating
PRIMARY CHARACTERISTICS
IF(AV) 1.0 A
VRRM (BYM10-xxx, GL41x) 50 V to 1000 V, 50 V to 1600 V
IFSM 30 A
IR10 μA
EAS 5 mJ
VF1.1 V, 1.2 V
TJ max. 175 °C
Package DO-213AB
Diode variations Single die
DO-213AB
SUPERECTIFIER
®
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
BYM
10-50
BYM
10-100
BYM
10-200
BYM
10-400
BYM
10-600
BYM
10-800
BYM
10-1000 UNIT
STANDARD RECOVERY
DEVICE: 1ST BAND IS WHITE GL41A GL41B GL41D GL41G GL41J GL41K GL41M GL41T GL41Y
Polarity color bands (2nd band) Gray Red Orange Yellow Green Blue Violet White Brown
Max. repetitive peak
reverse voltage VRRM 50 100 200 400 600 800 1000 1300 1600 V
Max. RMS voltage VRMS 35 70 140 280 420 560 700 910 1120 V
Max. DC blocking voltage VDC 50 100 200 400 600 800 1000 1300 1600 V
Max. average forward rectified
current (fig. 1) IF(AV) 1.0 A
Peak forward surge current
8.3 ms single half sine-wave IFSM 30 A
Max. full load reverse current
full cycle average
at TA = 75 °C
IR(AV) 30 μA
Non-repetitive peak reverse
avalanche energy at TJ = 25 °C,
IAS = 1 A, L = 10 mH
EAS 5-mJ
Operating junction and storage
temperature range TJ, TSTG - 65 to + 175 °C
BYM10-xxx, GL41x
www.vishay.com Vishay General Semiconductor
Revision: 11-Dec-13 2Document Number: 88546
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) Thermal resistance from junction to ambient, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal
(2) Thermal resistance from junction to terminal, 0.24" x 0.24" (6.0 mm x 6.0 mm) copper pads to each terminal
Note
(1) AEC-Q101 qualified
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER TEST
CONDITIONS SYMBOL
BYM
10-50
BYM
10-100
BYM
10-200
BYM
10-400
BYM
10-600
BYM
10-800
BYM
10-1000 UNIT
GL41A GL41B GL41D GL41G GL41J GL41K GL41M GL41T GL41Y
Max.
instantaneous
forward voltage
1.0 A VF 1.1 1.2 V
Max. DC
reverse current
at rated DC
blocking
voltage
TA = 25 °C
IR
10
μA
TA = 125 °C 50
Typical junction
capacitance 4.0 V, 1 MHz CJ 8.0 pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL
BYM
10-50
BYM
10-100
BYM
10-200
BYM
10-400
BYM
10-600
BYM
10-800
BYM
10-1000 UNIT
GL41A GL41B GL41D GL41G GL41J GL41K GL41M GL41T GL41Y
Typical thermal resistance RJA (1) 75 °C/W
RJT (2) 30
ORDERING INFORMATION (Example)
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
BYM10-600-E3/96 0.114 96 1500 7" diameter plastic tape and reel
BYM10-600-E3/97 0.114 97 5000 13" diameter plastic tape and reel
GL41J-E3/96 0.114 96 1500 7" diameter plastic tape and reel
GL41J-E3/97 0.114 97 5000 13" diameter plastic tape and reel
BYM10-600HE3/96 (1) 0.114 96 1500 7" diameter plastic tape and reel
BYM10-600HE3/97 (1) 0.114 97 5000 13" diameter plastic tape and reel
GL41JHE3/96 (1) 0.114 96 1500 7" diameter plastic tape and reel
GL41JHE3/97 (1) 0.114 97 5000 13" diameter plastic tape and reel
BYM10-xxx, GL41x
www.vishay.com Vishay General Semiconductor
Revision: 11-Dec-13 3Document Number: 88546
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Max. Non-Repetitive Peak Forward Surge Current
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 4 - Typical Reverse Characteristics
Fig. 5 - Typical Junction Capacitance
Fig. 6 - Typical Transient Thermal Impedance
25 50 75 100 125 150 175
0
0.25
0.50
0.75
1.0
60 Hz
Resistive or
Inductive Load
Average Forward Rectified Current (A)
Terminal Temperature (°C)
GL41A thru GL41M
GL41T thru GL41Y
110 100
10
5.0
15
20
25
30
GL41A thru GL41M
0
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
T
J
= T
J
Max.
8.3 ms Single Half Sine-Wave
0.4 0.6 0.8 1.0 1.2 1.4 1.6
10
1
0.1
0.01
TJ = 25 °C
Pulse Width = 300 µs
1 % Duty Cycle
Instantaneous Forward Voltage (V)
Instantaneous Forward Current (A)
GL41A thru GL41J
GL41K thru GL41Y
020 40 60 80 100
0.01
0.1
1
10
Instantaneous Reverse Current (µA)
TJ = 100 °C
TJ = 25 °C
Percent of Rated Peak Reverse Voltage (%)
110 100
10
1
100
Reverse Voltage (V)
Junction Capacitance (pF)
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
0.01 0.1 101 100
0.1
10
100
1
Mounted on 0.20" x 0.27" (5 mm x 7 mm)
Copper Pad Areas
(
t - Pulse Duration (s)
Transient Thermal Impedance (°C/W)
BYM10-xxx, GL41x
www.vishay.com Vishay General Semiconductor
Revision: 11-Dec-13 4Document Number: 88546
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-213AB
1
st
band denotes type and positive end (cathode)
1
st
Band
Solderable Ends
D2 = D1
+ 0
- 0.008 (0.20)
D2 0.105 (2.67)
0.095 (2.41)
D1 =
0.022 (0.56)
0.018 (0.46)
0.022 (0.56)
0.018 (0.46)
0.205 (5.2)
0.185 (4.7)
Mounting Pad Layout
0.138 (3.5) MAX.
0.049 (1.25) MIN.
0.238 (6.0) REF.
0.118 (3.0) MIN.
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
