AMPLA7030S MOLDED INDUCTOR
• Shielded construction
• Soft saturation
• High current density
• Designed for switching frequencies between
100KHz-2MHz
• Automotive option available upon request
ELECTRICAL SPECIFICATIONS @ 25°C
PART NUMBER* INDUCTANCE
(uH)
TOLERANCE
(%)
IRMS
(A)
ISAT
(A)
DC RESISTANCE
(mΩ) TYPE
TYP MAX
AMPLA7030S-R10NT 0.10 30 32.5 60 1.2 1.7 Lead Frame
AMPLA7030S-R13NT 0.13 30 27.6 50 1.3 1.8 Lead Frame
AMPLA7030S-R15NT 0.15 30 27 45 1.5 1.9 Lead Frame
AMPLA7030S-R16NT 0.16 30 27 45 1.5 1.9 Lead Frame
AMPLA7030S-R18NT 0.18 30 25 43 1.7 2.3 Lead Frame
AMPLA7030S-R19NT 0.19 30 24 41 1.8 2.5 Lead Frame
AMPLA7030S-R20NT 0.20 30 24 41 1.8 2.5 Lead Frame
AMPLA7030S-R22NT 0.22 30 23 40 2.1 2.8 Lead Frame
AMPLA7030S-R25MT 0.25 20 21 39 3.3 3.5 Lead Frame
AMPLA7030S-R33MT 0.33 20 20 32 3.5 3.9 Lead Frame
AMPLA7030S-R36MT 0.36 20 19 32 3.6 4.2 Lead Frame
AMPLA7030S-R40MT 0.40 20 18 27.5 3.7 4.1 Lead Frame
AMPLA7030S-R47MT 0.47 20 17.5 26 4.0 4.2 Lead Frame
AMPLA7030S-R56MT 0.56 20 16.5 25.5 4.7 5.0 Lead Frame
AMPLA7030S-R60MT 0.60 20 16 25.5 4.7 5.2 Lead Frame
AMPLA7030S-R68MT 0.68 20 15.5 25 4.8 5.5 Lead Frame
AMPLA7030S-R75MT 0.75 20 14.5 24.5 5.5 6.6 Lead Frame
AMPLA7030S-R82MT 0.82 20 13 24 6.7 8 Lead Frame
AMPLA7030S-R90MT 0.90 20 11 22 8.3 10 Lead Frame
AMPLA7030S-1R0MT 1.0 20 11 22 8.3 10 Lead Frame
AMPLA7030S-1R2MT 1.2 20 10 20 10 12 Lead Frame
AMPLA7030S-1R5MT 1.5 20 9.0 18 13 15 Lead Frame
AMPLA7030S-1R8MT 1.8 20 8.5 16 14 17 Lead Frame
AMPLA7030S-2R0MT 2.0 20 8.2 15 16 19 Lead Frame
AMPLA7030S-2R2MT 2.2 20 8.0 14 18 20 Lead Frame
AMPLA7030S-2R5MT 2.5 20 7.0 13 20 22 Lead Frame
AMPLA7030S-2R7MT 2.7 20 7. 0 13 24 27 Lead Frame
AMPLA7030S-3R3MT 3.3 20 6.0 13.5 28 30 Lead Frame
AMPLA7030S-4R7MT 4.7 20 5.5 10 37 40 Lead Frame
AMPLA7030S-5R6MT 5.6 20 5.0 9.0 43 48 Lead Frame
AMPLA7030S-6R8MT 6.8 20 4.5 8.0 54 60 Lead Frame
AMPLA7030S-8R2MT 8.2 20 4.0 7.5 64 68 Lead Frame
AMPLA7030S-100MT 10 20 3.5 6.0 75 85 Lead Frame
AMPLA7030S-120MT 12 20 3.3 5.5 81 93 Lead Frame
AMPLA7030S-150MT 15 20 3.0 4.0 107 123 Lead Frame
AMPLA7030S-180MT 18 20 2.5 4.0 140 160 Lead Frame
AMPLA7030S-220MT 22 20 2.0 3.5 165 190 Lead Frame
AMPLA7030S-330MT 33 20 2.0 2.5 200 240 Lead Frame
AMPLA7030S-470MT 47 20 1.75 2.0 302 363 Lead Frame
Test Conditions
Inductance: 100 kHz, 1 V, 0 Adc
Humidity Range: 85 ± 2% RH
Temperature Rise Current: Current measured at ∆ T of 40°C
Saturation Current: Current measured at ∆ L of 30%
LL
C
™
FEATURES
Operating Temperature:
-55°C to +125°C with (40°C rise) Irms
current.
Maximum Part Temperature: +125°C
Components Storage Temperature:
-55°C to +125°C
Tape and Reel Packaging
Temperature: -55°C to +80°C
MSL: Level 1
Not recommended for D.I. water
wash
GENERAL
SPECIFICATIONS
PRODUCT DIMENSIONS
MATERIALS
Core: Carbonyl Powder
Wire: Copper
Terminal: Tin Plating
Ink: Black
Paint: Gray
Revised 12/16/19
LL
C
™
2.8 ± 0.2
8.4
3.5
2.5
1.8 ± 0.3
3.0 ± 0.3
Check Inventory
ROHS
COMPLIANT
ISO
9001:2015
CERTIFIED
Top View Bottom View
Front View Side View
RECOMMENDED LANDING PATTERN
Dimensions: mm
* Please refer to Part Identification section
Pb
7.3 ± 0.3
6.6 ± 0.3
Request Samples
Tp
TL
TL
Tp
TSMIN
TSMAX
Ramp Up
Ramp Down
Critical Zone
TL to Tp
2
3
1
Time
t 25˚C to Peak
25
Preheat
Temperature
AMPLA7030S MOLDED INDUCTOR LL
C
™
RECOMMENDED REFLOW PROFILE
ZONE DESCRIPTION TEMPERATURE TIMES
1Preheat Tsmin ~ Tsmax
150°C ~ 200°C 60 ~ 180 sec.
2Reflow TL
217°C 60 ~ 150 sec.
3Peak Heat TP
260°C 10 sec. MAX
Revised 12/16/19
LL
C
™
AMPLA7030S 1R0 M T
Series Inductance* Tol. 1Packaging 2
1. Tolerance: M = 20% 2. Packaging: B = Bulk
N = 30% T = Tape and Reel (1,000pcs/reel)
*Refer to Electrical Specification table
PART BUILDER
AMPLA7030S MOLDED INDUCTOR LL
C
™
PACKAGING
TYPE A B C D
13” x 16 mm 16.4 +2/-0 100 ± 2.0 13.0 +0.5/-0.2 330
B0A0K0P W F T D
7.7 ± 0.1 7.0 ± 0.1 3.3 ± 0.1 12.0 ± 0.1 16.0 ± 0.3 7.5 ± 0.1 0.35 ± 0.05 1.5 ± 0.1
Tape and Reel: 1,000
Units per Carton: 8,000
T&R per Carton: 8
Weight per Carton: 11.1 kg
Weight per Unit: 0.75 g
Carton Dimensions: 410 x 325 x 415 mm
This product is commercial o-the-shelf (COTS) and not specifically designed for automotive, military, aviation, aerospace, implantable, life-dependent
medical or safety applications. This product is not recommended for use in any application requiring high reliability in which component failure could result
in loss of life and/or property damage without prior written approval from Abracon. Specifications are subject to change without notice. Contact Abracon for
more information.
Revised 12/16/19
Headquarters:
5101 Hidden Creek Ln Spicewood TX 78669
Phone: 512-371-6159 | Fax: 512-351-8858
LL
C
™
Dimensions: mm
