www.fairchildsemi.com 2 OF 4 7/02/01 DS300352
Parameter Symbol Rating Units
Operating Temperature TOPR -40 to +85 °C
Storage Temperature TSTG -40 to +85 °C
Soldering Temperature (Iron)(2,3,4) TSOL-I 240 for 5 sec °C
Soldering Temperature (Flow)(2,3) TSOL-F 260 for 10 sec °C
EMITTER
Continuous Forward Current IF50 mA
Reverse Voltage VR5V
Power Dissipation(1) PD100 mW
SENSOR
Collector-Emitter Voltage VCEO 30 V
Emitter-Collector Voltage VECO 5V
Collector Current IC20 mA
Power Dissipation(1) PD100 mW
ABSOLUTE MAXIMUM RATINGS (TA= 25°C unless otherwise specified)
ELECTRICAL / OPTICAL CHARACTERISTICS (TA= 25°C)
PARAMETER TEST CONDITIONS SYMBOL MIN TYP MAX UNITS
EMITTER IF= 40 mA VF— — 1.7 V
Forward Voltage
Reverse Current VR= 2.0 V IR— — 100 µA
Peak Emission Wavelength IF= 20 mA !PE — 940 — nm
SENSOR IC= 1 mA BVCEO 30 — — V
Collector-Emitter Breakdown Voltage
Emitter-Collector Breakdown Voltage IE= 0.1 mA BVECO 5——V
Collector-Emitter Dark Current VCE = 10 V, IF= 0 mA ICEO — — 100 nA
COUPLED
On-state Collector Current IF=40mA,VCE=5V,D =.150”(5,7) IC(ON) 0.20 — — mA
Collector-Emitter IF= 40 mA, IC= 0.1 mA VCE (SAT) — — 0.4 V
Saturation Voltage D = .150”(5,7)
Rise Time VCE = 5 V, RL = 100 "tr—8—
µs
Fall Time IC(ON) = 5 mA tf—8—
Crosstalk IF= 40 mA, VCE = 5 V(6) ICX — — 1.00 µA
PHOTOTRANSISTOR OPTICAL
INTERRUPTER SWITCH
QRC1113
NOTES
1. Derate power dissipation linearly 1.67 mW/°C above 25°C.
2. RMA flux is recommended.
3. Methanol or isopropyl alcohols are recommended as cleaning agents.
4. Soldering iron 1/16” (1.6mm) minimum from housing.
5. D is the distance from the assembly face to the reflective surface.
6. Cross talk is the photo current measured with current to the input diode and no reflecting surface.
7. Measured using an Eastman Kodak neutral test card with 90% diffused reflecting surface.