1N5614 THRU 1N5622
GLASS PASSIVATED MEDIUM-SWITCHING JUNCTION RECTIFIER
Reverse Voltage - 200 to 1000 Volts Forward Current - 1.0. Ampere
FEATURES
♦ High temperature metallurgically bonded construction
♦ 1.0 Ampere operation
at TA= 55°C with
no thermal r unaway
♦ Typical IRless than 0.1µA
♦ Hermetically sealed package
♦ Capable of meeting environmental standards of
MIL-S-19500
♦ High temperature soldering guaranteed:
350°C/10 seconds, 0.375” (9.5mm) lead length,
5 lbs. (2.3kg) tension
MECHANICAL DATA
Case: JEDEC DO-204AP solid glass body
Terminals: Solder plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.02 ounce, 0.56 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
SYMBOLS 1N5614 1N5616 1N5618 1N5620 1N5622 UNITS
* Maximum repetitive peak reverse voltage VRRM 200 400 600 800 1000 Volts
Maximum RMS voltage VRMS 140 280 420 560 700 Volts
* Maximum DC blocking voltage VDC 200 400 600 800 1000 Volts
* Minimum reverse breakdown voltage at 50µAV
BR 220 440 660 880 1100 Volts
Maximum average forward rectified current
0.375” (9.5mm) lead length at TA=55°CI(AV) 1.0 Amp
* Peak forward surge current
8.3ms single half sine-wave superimposed IFSM 50.0 Amps
on rated load (JEDEC Method)
* Maximum instantaneous forward voltage at 1.0A VF1.2 Volts
* Maximum DC reverse current TA=25°C 0.5
at rated DC blocking voltage TA=100°CI
R25.0 µA
TA=200°C 1500
* Maximum reverse recover y time (NOTE 1) trr 2.0 µs
Maximum junction capacitance (NOTE 2) CJ45 35 25 20 15 pF
Typical ther mal resistance (NOTE 3) RΘJA 55.0 °C/W
* Operating junction temperature range TJ-65 to +175 °C
* Storage temperature range TSTG -65 to +200 °C
NOTES:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0 MHZand applied reverse voltage of 12 Volts
(3) Ther mal resistance from junction to ambient at 0.375” (9.5mm) lead length P.C.B. mounted
*JEDEC registered values
DO-204AP
0.034 (0.86)
0.028 (0.71)
DIA.
0.150 (3.8)
0.100 (2.5)
DIA.
1.0 (25.4)
MIN.
0.240 (6.1)
MAX.
1.0 (25.4)
MIN.
Dimensions in inches and (millimeters)
*
Brazed-lead assembly is covered by Patent No. 3,930,306
PATENTED*
25 50 75 100 125 150 175
0
0.25
0.5
0.75
1.0
1 10 100
0
10
20
30
40
50
110100
1
10
30
0.4 0.6 0.8 1.0 1.2 1.4 1.6
0.01
0.1
10
1
02040 60 80 100
0.01
0.1
1
10
RATINGS AND CHARACTERISTIC CURVES 1N5614 THRU 1N5622
FIG. 1 - FORWARD CURRENT DERATING CURVE
AMBIENT TEMPERATURE, °C
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
FIG. 2 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
NUMBER OF CYCLES AT 60 HZ
PEAK FORWARD SURGE CURRENT,
AMPERES
FIG. 3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS FORWARD CURRENT,
AMPERES
INSTANTANEOUS REVERSE CURRENT,
MICROAMPERES
INSTANTANEOUS FORWARD VOLTA GE, VOLTS
FIG. 5 - TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE, pF
REVERSE V OLTAGE, V OLTS
TJ=TJmax.
8.3ms SINGLE HALF SINE-WAVE
(JEDEC Method)
TJ= 25°C
TJ=25°C
PULSE WIDTH=300µs
1% DUTY CYCLE
TJ=25°C
f=1.0 MHZ
Vsig=50mVp-p
60 HZ
RESISTIVE OR
INDUCTIVE LOAD
0.375" (9.5mm)
LEAD LENGTH
TJ=125°C
PERCENT OF RATED PEAK REVERSE VOLTAGE, %
TJ=75°C
TJ=150°C
