717TWB17W2PMP3SV4F - Amphenol Corporation

E1/B CONTENTS

DESCRIPTION

APPLICATIONS

The new Amphenol D’Sub TW

Hybrid Series permits a mix of

contacts including signal, power,

shielded, high voltage and fiber

optics in the same housing with

18 different contacts arrangements.

This new economic series was

developed from combination military

series, and has improved features:

- new contacts

- new high temperature black

thermoplastic insert

- PCB configurations come preloaded

with fixed contacts and brackets.

These connectors are supplied with

screw - machined contacts which are

fixed in the insulator.

A complete range of housings in also

available for cable application.

•Industrial

•Military

•Telecom

•Any application requiring

optimization of space

TW / E1

Specifications

UL file: E64911 - CSA file: LR57744

Connectors according to: MIL C24308 - NFC93425 - HE507

A full range of

arrangements

compatible with

reflow process

A full range of

arrangements

compatible with

reflow process

Hybrid D’Sub series

Materials and platings

Shells Steel - Tin plating or yellow chromate

Insulators High temperature black thermoplastic

Signal contacts Female: machined bronze

Material Male: machined brass

Plating finish 16µ “Au over 79µ“ Ni min.

Or 30µ “Au over 79µ“ Ni min.

Shielded contacts Female: machined bronze

Material Male: machined brass

Plating

Inner conductor 16µ “Au or 30µm Au over 79µ“ Ni

Outer ring 10µ “Au over 79µ“ Ni

Terminations Tinned

Except solder cup and crimp terminations gold flash

Power contacts Female: machined bronze

Material Male: machined brass

Plating

Contacts 16µ “Au or 30µ“ Au over 79µ“ Ni

Terminations Tinned

Except solder cup and crimp terminations gold flash

Brackets Steel - Tin plating or yellow chromate

Front jackscrews Brass - Tin plating or yellow chromate

Rear clinch nuts Brass - Tin plating or yellow chromate

Boardlocks Bronze - Tin plating

Stand - off Brass - Tin plating

Electrical Data

Current rating

Signal contacts 7.5 A. with 10 A. peaks

Power contacts

PCB terminations 10 to 40 A.

Solder cup terminations 10 to 40 A.

Crimp terminations 10 to 40 A.

Shielded contacts 0.5 A.

Voltage rating

Signal and power contacts 300 V. R. M. S. at 50 Hz

Shielded contacts 150 V. R. M. S. at 50 Hz

Shielded contacts

Frequency range 0 - 1 GHz

Attenuation 0.2 dB

V.S.W.R. 1.4 (+ 0.04/GHz)

Characteristic impedance 50 Ohms

Dielectric withstanding

voltage ≥1000 V.R.M.S. at 50Hz

Insulation resistance ≥5000 M Ohms at 500 VDC

Contact resistance ≤5m Ohms

Shell resistance ≤1m Ohm

(electrical grounding)

Climatic Data

Operating temperature - 55°C + 155°C

(with peaks up to 180°C)

Damp heat 56 days (40°C - 95% HR)

Salt spray 48 hours

Mechanical data

Shells With or without dimples

Contact retention force in dielectric material > 40N

Maximum mating and unmating force

With dimples E size = 70 N

A size = 80 N

B size = 100 N

C size = 150 N

D size = 180 N

Without dimples E size = 30 N

A size = 50 N

B size = 80 N

C size = 120 N

D size = 160 N

Compatible with process

IR - Air convectioned 260° for 20 s.

Resistance to solder iron heat 260° C for 30 s.

Mating cycles ≥200 (classe II) or 500 (classe I)

Blind mating system Available upon request

Polarization Available with locking accessories

Consult factory

Fiche E1/B TW 21/06/02 16:28 Page 2

Shells and contacts plating

Housing arrangements

Male front view

TECHNICAL DATAS

Types Shells and plating

117 TW Yellow chromated shell

Male and female

177 TW Tin plated shell

Male and female

777 TW Tin plated shell with dimples

Male only

NOTE: Tin plated shells standard

CLASS I

0.76µm (30µ‘‘) Au contacts gold plating

500 mating cycles

Types Shells and plating

17 TW Yellow chromated shell

Male and female

77 TW Tin plated shell

Male and female

717 TW Tin plated shell with dimples

Male only

NOTE: Tin plated shells standard

CLASS II

0.4µm (16µ‘‘) Au contacts gold plating

200 mating cycles

EAA

ABB

BBB

CCC

DDD

Arrangement

Shell size

Arrangement

Shell size

Arrangement

Shell size

Arrangement

Shell size

Arrangement

Shell size

Arrangement

Shell size

Fiche E1/B TW 21/06/02 16:28 Page 2

TECHNICAL DATAS

Shell size dimensions

Shell Contact A B B’ C D D’ E F F’ G G’ H J

size

P16.8 8.2 10.9 5.9

E30.7 (.661“) 25.0 (.323“) 12.4 (.429“) (.232“) 19.4 11.0

S(1.209“) 16.4 (.984“) 8.0 (.488“) 11.1 6.2 (.764“) (.433“)

(.646“) (.315“) (.437“) (.244“)

P25.1 8.2 10.9 5.9

A39.0 (.988“) 33.3 (.323“) 12.4 (.429“) (.232“) 27.7 11.0

S(1.535“) 24.8 (1.311“) 8.0 (.488“) 11.1 6.2 (1.091“) (.433“)

(.976“) (.315“) (.437“) (.244“)

P38.8 8.2 11.0 5.8

B52.9 (1.528“) 47.0 (.323“) 12.4 (.433“) (.228“) 41.4 11.0

S(2.083“) 38.5 (1.850“) 8.0 (.488“) 11.1 6.2 (1.630“) (.433“)

(1.513“) (.315“) (.437“) (.244“)

P55.3 8.2 11.0 5.8

C69.2 (2.177“) 63.5 (.323“) 12.4 (.433“) (.228“) 57.9 11.0

S(2.724“) 54.9 (2.500“) 8.0 (.488“) 11.1 6.2 (2.280“) (.433“)

(2.161“) (.315“) (.437“) (.244“)

P52.7 11.0 11.0 5.8

D66.8 (2.075“) 61.1 (.433“) 15.2 (.433“) (.228“) 55.5 13.8

S(2.630“) 52.5 (2.406“) 10.9 (.598“) 11.1 6.2 (2.185“) (.543“)

(2.067“) (.429“) (.437“) (.244“)

P: Pin ±0.25 0/-0.20 +0.20/0 ±0.10 0/-0.25 +0.25/0 ±0.20 +0.05/-0.20 +0.10/-0.20 +0.10/-0.20 ±0.10 +0.10/-0.40 0/-0.50

S: Socket (±.010) (0/-.008) (+.008/0) (±.004) (0/-.010) (+.010/0) (±.008) (+.002/-.008) (+.004/-.008) (+.004/-.008) (±.004) (+.004/-.016) (0/-.020)

Panel cutouts

Optimal cutout for rear mounting Standard cutout

DCRd Rading J

10°

øG

Rd Rading J

10°

Shell Mounting A B C D E F G H J

size method

Front 22.2 11.1 13.0 6.5 2.1

E(.874“) (.437“) 25.0 12.5 (.512“) (.256“) 3.0 1.5 (.083“)

Rear 20.5 10.2 (.984“) (.492“) 11.4 5.7 (.118“) (.059“) 3.4

(.807“) (.402“) (.449“) (.224“) (.0134“)

Front 30.5 15.3 13.0 6.5 2.1

A(1.201“) (.602“) 33.3 16.7 (.512“) (.256“) 3.0 1.5 (.083“)

Rear 28.8 14.4 (1.311“) (.657“) 11.4 5.7 (.118“) (.059“) 3.4

(1.134“) (.567“) (.449“) (.224“) (.0134“)

Front 44.3 22.1 13.0 6.5 2.1

B(1.744“) (.870“) 47.0 23.5 (.512“) (.256“) 3.0 1.5 (.083“)

Rear 42.5 21.3 (1.850“) (.925“) 11.4 5.7 (.118“) (.059“) 3.4

(1.673“) (.839“) (.449“) (.224“) (.0134“)

Front 60.7 30.4 13.0 6.5 2.1

C(2.390“) (1.197“) 63,5 31,7 (.512“) (.256“) 3.0 1.5 (.083“)

Rear 59.1 29.5 (2.500“) (1.248“) 11.4 5.7 (.118“) (.059“) 3.4

(2.327“) (1.161“) (.449“) (.224“) (.0134“)

Front 58.3 29.2 15.8 7.9 2.1

D(2.295“) (1.150“) 61.1 30.6 (.622“) (.311“) 3.0 1.5 (.083“)

Rear 56.3 28.2 (2.406“) (1.205“) 14.1 7.1 (.118“) (.059“) 3.4

(2.217“) (1.110“) (.555“) (.280“) (.0134“)

±0.20 ±0.20 ±0.20 ±0.20 ±0.20 ±0.20 ±0.20 ±0.20 ±0.20

(±.008) (±.008) (±.008) (±.008) (±.008) (±.008) (±.008) (±.008) (±.008)

TW / E1

Fiche E1/B TW 21/06/02 16:28 Page 3

TECHNICAL DATAS

Straight connector footprint

Dimensions

Description ab

4.50 mm 7.2 mm

Power (.126“ tail dia.)

(.177“) (.283“)

4.50 mm 7.2 mm

Power (.0787“ tail dia.)

(.177“) (.283“)

4.00 mm 7.2 mm

Shielded

(.157“) (.283“)

5.00 mm 11.50 mm

Signal

(.196“) (.453“)

Signal tail 0.6 mm Dia. (.0236“)

1.6 mm (.063“)PCB

For other PCB thickness: consult factory.

See above dimensions Size 8 and 20 Contacts

P 3SY Power 3.2 mm DIA. (.126“)

(20 to 40 A) and signal

P 2SY Power 2 mm DIA. (.0787“)

(10 to 20 A) and signal

CSY Shielded and signal

SY Signal only

No reference Signal (Size 20)

with solder cup terminations

Housing preloaded with contacts

Straight contact combinations

Arrangement with signal contacts Arrangement without signal contacts

3W3 - 5W5 - 8W8

➡

See above dimensions Size 8 Contacts

Power only

P 3Y 3.2 mm DIA. (.126”)

(20 to 40 A)

Power only

P 2Y 2 mm DIA. (.0787”)

(10 to 20 A)

CY Shielded only

➡

Fiche E1/B TW 21/06/02 16:28 Page 4

Europe Mix MIL

HE 5 pattern = Mixed pattern = MIL pattern =

- Europ. height - MIL height - MIL height

- Europ. footprint - Europ. footprint - MIL footprint

pitch between pitch between pitch between

2 rows: .100” 2 rows: .100” 2 rows: .112”

TECHNICAL DATAS

Right angle connector footprint

Description abcabcabc

10.30mm

6.30mm

10.00mm 10.30mm

6.30mm

10.00mm

Shielded

---

(.406”) (.248”) (.394”) (.406”) (.248”) (.394”)

10.30mm

7.20mm

11.20mm 10.30mm

6.30mm 9.50mm 8.10mm 6.30mm 9.50mm

Signal

(.406“) (.283“) (.441”) (.406”) (.248”) (.374”) (.319”) (.248”) (.374”)

11.57mm

7.20mm

10.50mm 11.57mm

6.30mm 9.50mm 9.52mm 6.30mm 9.50mm

Power (.0787“ tail dia.)

(.456“) (.283“) (.413”) (.456”) (.248”) (.374”) (.375”) (.248”) (.374”)

21.46mm

7.20mm

10.50mm 21.46mm

6.30mm 9.50mm

21.46mm

6.30mm 9.50mm

Power (.126“ tail dia.)

(.845“) (.283“) (.413”) (.845”) (.248”) (.374”) (.845”) (.248”) (.374”)

Note: above dimensions correpond to sizes E to C. Consult factory for D sizes.

Connector comes equiped with contacts and brackets.

European Mixed MIL (U.S.) Size 8 and

footprint footprint footprint 20 contacts

Power 3.2 mm

EP3SV HP3SV MP3SV DIA. (.126”) (20 to

40 A) and signal

Power 2 mm

EP2SV HP2SV MP2SV DIA. (.0787”) (10 to

20 A) and signal

- HCSV MCSV Shielded and signal

ESV HSV MSV Signal only

Right angle contacts combinations

Arrangements with signal contacts Arrangement without signal contacts

3W3 - 5W5 - 8W8

➡

European Mixed MIL (U.S.) Size 8 contacts

footprint footprint footprint only

Power only

EP3V HP3V MP3V 3.2 mm DIA. (.126”)

(20 to 40 A)

Power only

EP2V HP2V MP2V 2.0 mm DIA. (0.0787)

(10 to 20 A)

- HCV MCV Shielded only

➡

Signal tail 0.6 mm Dia. (.0236“)

1.6 mm (.063“) PCB

For other PCB thickness: consult factory.

COMBO / combo-etape-3-7w2p

TW / E1

Fiche E1/B TW 21/06/02 16:28 Page 5

TECHNICAL DATAS

Mounting options

Right angle version

Connectors come equiped with metal brackets

BLANK: 3,10 (.122“) dia mounting hole RM6: metal brackets + boardlock

Métal bracket

RM6

Straight version

BLANK: 3,10 (.122“) dia mounting hole RM54: RM5 4.40 threaded

RM53: RM5 M3 threaded

RM84: RM8 4.40 threaded

RM83: RM8 M3 threaded

1.5 max.

(.059 max.)

RM5

RM8

7.2 (.283)

A514: blind mating system FM: float mounting system

Ø 3+ 0.25

(.118)

19.9

(.783)

3.5

(.137)

Ø 2.2 (.086)

3.6 max.

(.141 max.)

Straight and right angle version

4R: 4.40 rear nut

3R: M3 rear nut 4F: 4.40 front female screwlock

3F: M3 front female screwlock

3.4

(.134)

(.279)

7.1

Ø 2.25

(.088)

Fiche E1/B TW 21/06/02 16:28 Page 6

TECHNICAL DATAS

High power contacts

Solder cup version

Crimp version

P/N Current Dimensions

Plug Socket A mm (inch) B mm (inch)

17DM 53745-8 17DM 53744-7 10 to 20 Amp. 1.80 (.071”) 2.55 (.100”)

17DM 53745-7 17DM 53744-6 20 to 30 Amp. 2.80 (.110”) 3.70 (.145”)

17DM 53745-1 17DM 53744-1 30 to 40 Amp. 4.80 (.189”) 5.60 (.220”)

Trim dimensions: 7.5 mm (.295”)

P/N Current Dimensions

Plug Socket A mm (inch) B mm (inch)

17DM 53745-208 17DM 53744-207 10 to 20 Amp. 1.80 (.071”) 2.55 (.100”)

17DM 53745-207 17DM 53744-206 20 to 30 Amp. 2.80 (.110”) 3.70 (.145”)

17DM 53745-201 17DM 53744-201 30 to 40 Amp. 4.80 (.189”) 5.60 (.220”)

Trim dimensions: 7.5 mm (.295”)

Crimping tool for all sizes

17D479SP Extraction tool for sizes 8 cts

17D429SP

.205"

.189"

TW / E1

Fiche E1/B TW 21/06/02 16:28 Page 7

TECHNICAL DATAS

Straight shielded contacts

Crimp ferrule/Inner solder

Type P/N Dimensions (inch) Cable - RG Trim dimensions (inch)

A Max B D E F G

plug 17DM 53740 18.8 (.740”) 23.6 (.929”) 1.0 (.039”) 178 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)

plug 17DM 53740-1 18.8 (.740”) 23.6 (.929”) 1.7 (.066”) 179 B/U 316 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)

plug 17DM 53740-3 21.5 (.846”) 23.6 (.929”) 2.8 (.110”) 180 B/U 9.5 (.374”) 7.9 (.311”) 2 (.078”)

plug 17DM 53740-5 21.5 (.846”) 23.6 (.929”) 3.2 (.126”) 58 C/U 9.5 (.374”) 7.9 (.311”) 2 (.078”)

socket 17DM 53742 18.8 (.740”) 23.6 (.929”) 1.0 (.039”) 178 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)

socket 17DM 53742-1 18.8 (.740”) 23.6 (.929”) 1.7 (.066”) 179 B/U 316 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)

socket 17DM 53742-3 21.5 (.846”) 23.6 (.929”) 2.8 (.110”) 180 B/U 9.5 (.374”) 7.9 (.311”) 2 (.078”)

socket 17DM 53742-5 21.5 (.846”) 23.6 (.929”) 3.2 (.126”) 58 C/U 9.5 (.374”) 7.9 (.311”) 2 (.078”)

Type P/N Dimensions (inch) Cable - RG Trim dimensions (inch)

A Max B D E F G

short plug 17DM 53740-5000 17.0 (.669”) 21.8 (.858”) 1.0 (.039”) 178 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)

plug 17DM 53740-5001 18.8 (.740”) 23.6 (.929”) 1.7 (.066”) 179 B/U 316 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)

plug 17DM 53740-5002 21.5 (.846”) 26.3 (1.035”) 2.8 (.110”) 180 B/U 9.5 (.374”) 7.9 (.311”) 2 (.078”)

plug 17DM 53740-5005 21.5 (.846”) 26.3 (1.035”) 3.2 (.126”) 58 C/U 9.5 (.374”) 7.9 (.311”) 2 (.078”)

plug 17DM 53740-5008 18.8 (.740”) 23.6 (.929”) 1.0 (.039”) 178 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)

short socket 17DM 53742-5000 17.0 (.669”) 21.8 (.858”) 1.0 (.039”) 178 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)

socket 17DM 53742-5001 18.8 (.740”) 23.6 (.929”) 1.7 (.066”) 179 B/U 316 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)

socket 17DM 53742-5002 21.5 (.846”) 26.3 (1.035”) 2.8 (.110”) 180 B/U 9.5 (.374”) 7.9 (.311”) 2 (.078”)

socket 17DM 53742-5004 21.5 (.846”) 26.3 (1.035”) 3.2 (.126”) 58 C/U 9.5 (.374”) 7.9 (.311”) 2 (.078”)

socket 17DM 53742-5006 18.8 (.740”) 23.6 (929”) 1.0 (.039”) 178 B/U 7.9 (.311”) 6.3 (.248”) 2 (.078”)

Ferrule and inner solder

Fiche E1/B TW 21/06/02 16:28 Page 8

Right angled shielded contact

Crimp ferrule/Inner solder

Type P/N Dimensions (inch) Cable - RG Trim dimensions (inch)

A Max B C D E F G

plug 17DM 53741 13.5 (.531”) 18.6 (.732”) 12.5 (.492”) 1.0 (.039”) 178 B/U 9.5 (.374”) 5.9 (.232”) 1.6 (.062”)

plug 17DM 53741-1 13.5 (.531”) 18.6 (.732”) 12.5 (.492”) 1.7 (.066”) 179 B/U 316 B/U 9.5 (.374”) 5.9 (.232”) 1.6 (.062”)

plug 17DM 53741-3 13.5 (.531”) 18.6 (.732”) 15.3 (.602”) 2.8 (.110”) 180 B/U 10.7 (.421”) 7.9 (.311”) 2.4 (.094”)

plug 17DM 53741-4 13.5 (.531”) 18.6 (.732”) 15.3 (.602”) 3.2 (.126”) 58 C/U 10.7 (.421”) 7.9 (.311”) 2.4 (.094”)

socket 17DM 53743-2 13.5 (.531”) 18.6 (.732”) 12.5 (.492”) 1.0 (.039”) 178 B/U 9.5 (.374”) 5.9 (.232”) 1.6 (.062”)

socket 17DM 53743-3 13.5 (.531”) 18.6 (.732”) 12.5 (.492”) 1.7 (.066”) 179 B/U 316 B/U 9.5 (.374”) 5.9 (.232”) 1.6 (.062”)

socket 17DM 53743-5 13.5 (.531”) 18.6 (.732”) 15.3 (.602”) 2.8 (.110”) 180 B/U 10.7 (.421”) 7.9 (.311”) 2.4 (.094”)

socket 17DM 53743-6 13.5 (.531”) 18.6 (.732”) 15.3 (.602”) 3.2 (.126”) 58 C/U 10.7 (.421”) 7.9 (.311”) 2.4 (.094”)

Ferrule and inner solder

Type P/N Dimensions (inch) Cable - RG Trim dimensions (inch)

A Max B C D E F G

plug 17DM 53741-5000 13.5 (.531”) 18.6 (.732”) 12.5 (.492”) 1.0 (.039”) 178 B/U 9.5 (.374”) 5.9 (.232”) 1.6 (.062”)

plug 17DM 53741-5001 13.5 (.531”) 18.6 (.732”) 12.5 (.492”) 1.7 (.066”) 179 B/U 316 B/U 9.5 (.374”) 5.9 (.232”) 1.6 (.062”)

plug 17DM 53741-5003 13.5 (.531”) 18.6 (.732”) 13.9 (.547”) 2.8 (.110”) 180 B/U 10.7 (.421”) 7.9 (.311”) 2.4 (.094”)

plug 17DM 53741-5004 13.5 (.531”) 18.6 (.732”) 13.9 (.547”) 3.2 (.126”) 58 C/U 10.7 (.421”) 7.9 (.311”) 2.4 (.094”)

socket 17DM 53743-5000 13.5 (.531”) 18.6 (.732”) 12.5 (.492”) 1.0 (.039”) 178 B/U 9.5 (.374”) 5.9 (.232”) 1.6 (.062”)

socket 17DM 53743-5001 13.5 (.531”) 18.6 (.732”) 12.5 (.492”) 1.7 (.066”) 179 B/U 316 B/U 9.5 (.374”) 5.9 (.232”) 1.6 (.062”)

socket 17DM 53743-5003 13.5 (.531”) 18.6 (.732”) 13.9 (.547”) 2.8 (.110”) 180 B/U 10.7 (.421”) 7.9 (.311”) 2.4 (.094”)

socket 17DM 53743-5004 13.5 (.531”) 18.6 (.732”) 13.9 (.547”) 3.2 (.126”) 58 C/U 10.7 (.421”) 7.9 (.311”) 2.4 (.094”)

TECHNICAL DATAS

Crimping tool

Extraction tool

Hand crimp tool

227-0944 (without dies) (M 22 520/5-01)

RG cables MIL reference Amphenol P/N

dim. between 2 flat surface

cavity A cavity B

RG 58 C/U M 22 520/5-05 227 1221-05 5.41 –

RG 178 B/U M 22 520/5-03 227 1221-03 – 2.67

RG 179 B/U M 22 520/5-03 227 1221-03 3.25 –

RG 180 B/U M 22 520/5-05 227 1221-05 – 4.52

Crimping tool for all sizes

Amphenol ref: 227-0994 - MIL ref: M22520/5-01 Extraction tool for sizes 8 cts

17D429SP

TW / E1

Fiche E1/B TW 21/06/02 16:28 Page 9

ASSEMBLY INSTRUCTIONS

Cabling instructions for shielded contacts

Straight crimp shielded contacts: inner solder contact

outer crimp contact

Right angle crimp shielded contacts: inner solder contact

outer crimp contact

Assembly method

- Slide the outer ring over the cable jacket. Trim the cable

according to the recommended dimensions.

- Insert the cable dielectric and the center conductor inside

the inner sleeve.

- Solder the central conductor to the shielded center

contacts.

- Slide the outer ring towards the inner sleeve ans recover

the braid.

- Using crimp hand tool equipped with the appropriate

dies, crimp in the area defined.

Solder straight shielded contacts

Solder right angle shielded contacts

Assembly method

- Slide the outer ring over the cable jacket. Trim the cable

according to the recommended dimensions.

- Insert the cable dielectric and the center conductor inside

the inner sleeve.

- Solder the central conductor to the shielded center

contacts.

- Slide the outer ring towards the inner sleeve ans recover

the braid.

- Solder by introducing metal through the outer ring hole. 10

Fiche E1/B TW 21/06/02 16:28 Page 10

..... TW ..... / ..... / ..... .......... .......... ..........

How to build your part number

HOW TO ORDER

Consult factory for D size configurations

Page 2

17 TW

77 TW

717 TW

117 TW

177 TW

777 TW

Page 2

E 5W1 P/S

A 3W3 P/S

A 7W2 P/S

A 11W1 P/S

B 5W5 P/S

B 9W4 P/S

B 13W3 P/S

B 17W2 P/S

B 21W1 P/S

C 8W8 P/S

C 13W6 P/S

C 17W5 P/S

C 21WA4 P/S

C 25W3 P/S

C 27W2 P/S

D 24W7 P/S

D 36W4 P/S

D 43W2 P/S

Page 4/5

XP3SV

XP2SV

XP2V

XP3V

P2Y

P3Y

XCSV

XHCV

XSV

P3SY

P2SY

CSY

Page 6

A514

Page 6

RM6

RM53

RM54

RM83

RM84

Consult

factory

Shell +

contacts

Series

plating

Specials

PCB

Mounting

Panel

Mounting

Contact

combinations

Type:

Size Configu- P= male

rations S= fem.

Blank: solder cup signal contacts size 20 only

➝

TW / E1

Fiche E1/B TW 21/06/02 16:28 Page 11

NOTES

E1/B

Memo

Amphenol Socapex

Telecom Business Unit

21, chemin du Défois - BP 349

F - 39100 Dole

Fax: +33 (0) 3 84 82 94 11

http://www.dsubconnector.com

Technical support

Tel.: +33 (0) 3 84 82 94 00

Amphenol

Do not hesitate to contact us for further information

The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing.

Médiasquare +33 (0) 1 46 31 36 36

Fiche E1/B TW 21/06/02 16:28 Page 1