C&K 1000 Series Miniature Slide Switches Features/Benefits * Variety of actuators and terminations * Panel mount tabs available * Epoxy terminal seal--compatible with Typical Applications * Test & measurement equipment * Telecommunications * Computer & peripherals bottom-wash cleaning Models Available Materials CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material: 6 AMPS @ 120 V AC or 28 V DC, 3 AMPS @ 250 V AC. See page I-16 for additional ratings. ELECTRICAL LIFE: 100,000 make-and-break cycles at full load on models with B or K contact material; 40,000 cycles on models with G, Q, L or M contact material. CONTACT RESISTANCE: Below 10 m typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. OPERATING TEMPERATURE: -30C to 65C SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). CASE: diallyl phthalate (DAP), (UL 94V-0). ACTUATOR: Nylon, black, standard. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, tin plated. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page I-16 for additional contact materials. CENTER CONTACT & ALL TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page I-16 for additional contact materials. TERMINAL SEAL: Epoxy NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I-12 thru I-16. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all "bottom-wash" PCB cleaning methods. Switch Function 1101 (STD.) SP On-None-On 1103 SP On-Off-On 1108 SP Mom-None-On 1201 DP On-None-On 1203 DP On-Off-On Mounting Style M2(STD.) PC mount without tabs M1Panel mount with tabs Actuator S3(STD.) .200" high S1.040" high S2.140" high S4.285" high S5.370" high S6.485" high T3 .200" high Terminations A(STD.) Right angle, PC thru-hole C(STD.) PC Thru-hole AV2(STD.) Vertical right angle, PC thru-hole Z(STD.) Solder lug AV4Vertical right angle, PC thru-hole V3V-bracket V4V-bracket W.750" long, wire wrap Z3 Quick connect Contact Material B (STD.) Gold Q (STD.) Silver K Gold, tin-lead M Silver, tin-lead G Gold over silver L Gold over silver, tin-lead Seal E (STD.) Epoxy D No epoxy seal I Epoxy potted base Actuator Color 2 (STD.) Black 1 White 3 Red 7 Blue 9 Gray Dimensions are shown: IN (mm) Dimensions subject to change I-11 www.ittcannon.com I Slide Specifications C&K 1000 Series Miniature Slide Switches SWITCH FUNCTION SWITCH FUNCTION POS. 1 POS. 2 POS. 3 NO. POLES CONNECTED TERMINALS POS. 2 POS. 3 MODEL NO. 1101 SP POS. 1 SCHEMATIC ON NONE ON 1103 (STD.) ON OFF ON 1108 MOM. NONE ON N/A 1-2 OPEN 2-3 SPDT N/A SPDT Slide I Actuator shown in position 1 Terminal Nos. For Reference Only Part number shown: 1101M2S3CQE2 1201 ON NONE ON 1203 ON OFF ON DP 2-1,5-4 OPEN 2-3,5-6 DPDT DPDT Actuator shown in position 1 Terminal Nos. For Reference Only Part number shown: 1201M2S3CQE2 MOM. = Momentary All models with all options when ordered with G, L, M or Q contact material. MOUNTING STYLE M2 (STD.) PC MOUNTING WITHOUT TABS NOTE: Available with A, AV2, C, V3, V4, W terminations only. M1 PANEL MOUNTING WITH TABS NOTE: Available with C, W, Z, Z3 terminations only. No mounting hardware supplied. PANEL MOUNTING For T3 actuator only. Double pole All actuators except T3. Single pole Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change I-12 www.ittcannon.com C&K 1000 Series Miniature Slide Switches ACTUATOR COLOR ACTUATOR ACTUATOR S3 S2 (STD.) .200" HIGH S1 .140" HIGH S4 .040" HIGH .285" HIGH * * * * 120X models only. 110X models only. S5 S6 .370" HIGH T3 .485" HIGH I .200" HIGH * 120X models only. ACTUATOR COLOR 2 (STD.) BLACK 1 WHITE 3 RED 7 BLUE 9 GRAY Other colors available, consult Customer Service Center. * Subtract .014 (0,36) from actuator height, all models with A, AV2, V3, V4 terminations. TERMINATIONS Z C (STD.) SOLDER LUG (STD.) PC THRU-HOLE PC MOUNTING SPDT & DPDT Z3 Not available with K, L or M contact materials. SPDT & DPDT W QUICK CONNECT WIRE WRAP .750 (19,05) SPDT & DPDT Not available with K, L or M contact materials. Mating quick connector available; order part number 530100000, page I-16. SPDT & DPDT Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change I-13 www.ittcannon.com Slide * * OPTION CODE C&K 1000 Series Miniature Slide Switches TERMINATIONS A (STD.) RIGHT ANGLE, PC THRU-HOLE PC MOUNTING 1101M2S3ABE2 Horizontal Actuation SPDT Slide I SECTION A-A Actuator Shown In Pos. 1 Not available with M1 mounting style, I seal option. Terminal bend radii and lead-in manufacturing option. A (STD.) RIGHT ANGLE, PC THRU-HOLE PC MOUNTING 1201M2S3ABE2 Horizontal Actuation DPDT SECTION A-A Actuator Shown In Pos. 1 Not available with M1 mounting style, I seal option. Terminal bend radii and lead-in manufacturing option. AV2 (STD.) VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH PC MOUNTING 1101M2S3AV2BE2 Vertical Actuation Actuator Shown In Pos. 1 SECTION A-A SPDT Not available with M1 mounting style, I seal option. Terminal bend radii and lead-in manufacturing option. AV4 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH, EXTENDED .22 (5,6) .31 (7,9) .34 (8,6) Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change I-14 www.ittcannon.com C&K 1000 Series Miniature Slide Switches TERMINATIONS AV2 (STD.) VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH PC MOUNTING 1201M2S3AV2BE2 Vertical Actuation SECTION A-A Actuator Shown In Pos. 1 DPDT AV4 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH, EXTENDED .16 (4,1) .32 (8,1) V3, V4 .34 (8,6) VERTICAL MOUNT, V-BRACKET PC MOUNTING OPTION CODE DIM `A' V3 .350 (8,89) V4 .525 (13,34) 1101M2S3__BE2 SPDT Not available with M1 mounting style and I seal. V3, V4 Actuator Shown In Pos. 1 VERTICAL MOUNT, V-BRACKET PC MOUNTING OPTION CODE DIM `A' V3 .400 (10,16) V4 .575 (14,61) I Slide Not available with M1 mounting style, I seal option. Terminal bend radii and lead-in manufacturing option. 1201M2S3__BE2 DPDT Actuator Shown In Pos. 1 Not available with M1 mounting style and I seal. Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change I-15 www.ittcannon.com C&K 1000 Series Miniature Slide Switches CONTACT MATERIAL OPTION CODE B CONTACT MATERIAL (STD.) GOLD 1 K Q (STD.) SILVER 4,5 M G GOLD OVER SILVER 2,3 L TERMINAL PLATING RATINGS GOLD 1 LOW LEVEL/DRY CIRCUIT 0.4 VA MAX. @ 20 V AC OR DC MAX. TIN-LEAD 6 SILVER 5 POWER 6 AMPS @ 120 V AC OR 28 V DC; 3 AMPS @ 250 V AC. TIN-LEAD 6 GOLD 3 LOW LEVEL/DRY CIRCUIT OR POWER TIN-LEAD 6 0 4 VA MAX @ 20 V AC OR DC MAX OR 6 AMPS @ 120 V AC OR 0.4 MAX. 28 V DC; 3 AMPS @ 250 V AC. CONTACT MATERIAL/APPLICATION RECOMMENDATIONS-SEE SECTION N. Slide I 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. All models 2 END CONTACTS: Coin silver, with gold plate over nickel plate. with all options when ordered with G, L, M or Q contact material. B contact material standard with all terminations except C, Z, Z3.. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate Q contact material standard with C, Z, Z3 terminations. over nickel plate. K, L, M contact materials not available with Z, Z3 terminations. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with tin-lead alloy over nickel plate. SEAL E (STD.) EPOXY SEAL D I NO EPOXY SEAL EPOXY POTTED BASE NOTE: Available with C, W, W3, Z, Z3 terminations only. AVAILABLE HARDWARE Fits Z3 Termination female connector PART NO. 530100000 Available in loose pieces. Third Angle Projection Dimensions are shown: IN (mm) Dimensions subject to change I-16 www.ittcannon.com