I-11
Dimensions are shown: IN (mm)
Dimensions subject to change
www.ittcannon.com
C&K 1000 Series
Miniature Slide Switches
I
Slide
Features/Benefits
•Variety of actuators and terminations
•Panel mount tabs available
•Epoxy terminal seal—compatible with
bottom-wash cleaning
Typical Applications
•Test & measurement equipment
•Telecommunications
•Computer & peripherals
Specifications
CONTACT RATING: B contact material: 0.4 VA max. @
20 V AC or DC max. Q contact material: 6 AMPS @
120 V AC or 28 V DC, 3 AMPS @ 250 V AC.
See page I-16 for additional ratings.
ELECTRICAL LIFE: 100,000 make-and-break cycles at full
load on models with B or K contact material; 40,000 cycles
on models with G, Q, L or M contact material.
CONTACT RESISTANCE: Below 10 m Ωtyp. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ωmin.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 65ºC
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
Materials
CASE: diallyl phthalate (DAP), (UL 94V-0).
ACTUATOR: Nylon, black, standard.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass or steel, tin plated.
END CONTACTS: B contact material: Copper alloy, with gold plate over
nickel plate. Q contact material: Coin silver, silver plated. See
page I-16 for additional contact materials.
CENTER CONTACT & ALL TERMINALS: B contact material: Copper
alloy, with gold plate over nickel plate. Q contact material: Copper
alloy, silver plated. See page I-16 for additional contact materials.
TERMINAL SEAL: Epoxy
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages I-12 thru I-16. For additional options not shown in catalog, consult Customer Service Center. All models
have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
1101 (STD.) SP On-None-On
1103 SP On-Off-On
1108 SP Mom-None-On
1201 DP On-None-On
1203 DP On-Off-On
Mounting Style
M2(STD.) PC mount without tabs
M1Panel mount with tabs
Actuator
S3(STD.) .200" high
S1.040" high
S2.140" high
S4.285" high
S5.370" high
S6.485" high
T3.200" high
Contact Material
B(STD.) Gold
Q(STD.) Silver
KGold, tin-lead
MSilver, tin-lead
GGold over silver
LGold over silver, tin-lead
Seal
E(STD.) Epoxy
DNo epoxy seal
IEpoxy potted base
Actuator Color
2(STD.) Black
1White
3Red
7Blue
9Gray
Terminations
A(STD.) Right angle,PC thru-hole
C(STD.) PC Thru-hole
AV2(STD.) Vertical right angle, PC thru-hole
Z(STD.) Solder lug
AV4Vertical right angle, PC thru-hole
V3V-bracket
V4V-bracket
W.750" long, wire wrap
Z3 Quick connect
Models Available
I-12
Dimensions are shown: IN (mm)
Dimensions subject to change
www.ittcannon.com
C&K 1000 Series
Miniature Slide Switches
SWITCH FUNCTION
MOUNTING STYLE
Third Angle
Projection
I
Slide
PANEL MOUNTING
All actuators except T3.
Sin
g
le pole For T3 actuator only.
Double pole
M2 (STD.) PC MOUNTING WITHOUT TABS M1 PANEL MOUNTING WITH TABS
Actuator shown
in position 1
DPDT
2-3,5-6OPEN2-1,5-4
ON NONE ON
ON OFF ON
1201
1203
DP
Actuator shown
in position 1
SPDT
2-3
N/A
OPEN
N/A
1-2
ON NONE ON
ON OFF ON
MOM. NONE ON
1101 (STD.)
1103
1108
SP
SCHEMATIC
CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3
SWITCH FUNCTION
POS. 1 POS. 2 POS. 3
MODEL
NO.
NO.
POLES
DPDT
SPDT
MOM. = Momentary
All models with all options when ordered with G, L, M or Q contact material.
Terminal Nos.
For Reference Only
Terminal Nos.
For Reference Only
Part number shown: 1101M2S3CQE2
Part number shown: 1201M2S3CQE2
NOTE: Available with A, AV2, C, V3, V4, W terminations only. NOTE: Available with C, W, Z, Z3 terminations only.
No mounting hardware supplied.
I-13
Dimensions are shown: IN (mm)
Dimensions subject to change
www.ittcannon.com
C&K 1000 Series
Miniature Slide Switches
ACTUATOR
TERMINATIONS
Third Angle
Projection
I
Slide
*
120X models only.
*
110X models only.
**
**
*
120X models only.
PC MOUNTING
.750
(19,05)
C(STD.) PC THRU-HOLE
Z(STD.) SOLDER LUG
WWIRE WRAPZ3 QUICK CONNECT
T3 .200" HIGHS6 .485" HIGHS5 .370" HIGH
S4 .285" HIGHS3 (STD.) .200" HIGH S2 .140" HIGH S1 .040" HIGH
SPDT & DPDT SPDT & DPDT
SPDT & DPDT SPDT & DPDT
2(STD.) BLACK
1WHITE
3RED
7BLUE
9GRAY
ACTUATOR
COLOR
OPTION
CODE
Other colors available,
consult Customer Service Center.
Not available with K, L or
M contact materials.
Not available with K, L or M contact materials.
Mating quick connector available; order part
number 530100000, page I-16.
* Subtract .014 (0,36) from actuator height, all models with A, AV2, V3, V4 terminations.
ACTUATOR
ACTUATOR COLOR
I-14
Dimensions are shown: IN (mm)
Dimensions subject to change
www.ittcannon.com
C&K 1000 Series
Miniature Slide Switches
TERMINATIONS
Third Angle
Projection
I
Slide
PC MOUNTING
Actuator Shown In Pos. 1
SECTION A-A
PC MOUNTING
Actuator Shown In Pos. 1 SECTION A-A
PC MOUNTING
.22 (5,6)
.34
(8,6)
.31
(7,9)
AV4 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH, EXTENDED
AV2 (STD.) VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
A(STD.) RIGHT ANGLE, PC THRU-HOLE
A(STD.) RIGHT ANGLE, PC THRU-HOLE
Actuator Shown In Pos. 1 SECTION A-A
1101M2S3ABE2
Horizontal Actuation
SPDT
1201M2S3ABE2
Horizontal Actuation
DPDT
1101M2S3AV2BE2
Vertical Actuation
SPDT
Not available with M1 mounting style, I seal option.
Terminal bend radii and lead-in manufacturing option.
Not available with M1 mounting style, I seal option.
Terminal bend radii and lead-in manufacturing option.
Not available with M1 mounting style, I seal option.
Terminal bend radii and lead-in manufacturing option.
I-15
Dimensions are shown: IN (mm)
Dimensions subject to change
www.ittcannon.com
C&K 1000 Series
Miniature Slide Switches
TERMINATIONS
Third Angle
Projection
I
Slide
PC MOUNTING
.16 (4,1)
.34
(8,6)
.32
(8,1)
PC MOUNTING
PC MOUNTING
Actuator Shown In Pos. 1 SECTION A-A
Actuator Shown In Pos. 1
Actuator Shown In Pos. 1
Not available with M1 mounting style, I seal option.
Terminal bend radii and lead-in manufacturing option.
Not available with
M1 mounting style and I seal.
Not available with
M1 mounting style and I seal.
AV4 VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH, EXTENDED
AV2 (STD.) VERTICAL RIGHT ANGLE, PC THRU-HOLE,
.150" PITCH
V3, V4 VERTICAL MOUNT,
V-BRACKET
V3, V4 VERTICAL MOUNT,
V-BRACKET
1201M2S3AV2BE2
Vertical Actuation
DPDT
1101M2S3__BE2
SPDT
1201M2S3__BE2
DPDT
V3 .350 (8,89)
V4 .525 (13,34)
DIM ‘A’
OPTION
CODE
V3 .400 (10,16)
V4 .575 (14,61)
DIM ‘A’
OPTION
CODE
I-16
Dimensions are shown: IN (mm)
Dimensions subject to change
www.ittcannon.com
C&K 1000 Series
Miniature Slide Switches
CONTACT MATERIAL
AVAILABLE HARDWARE
Third Angle
Projection
I
Slide
0 4 VA MAX @ 20 V AC OR DC MAX OR 6 AMPS @ 120 V AC OR
0.4 MAX. 28 V DC; 3 AMPS @ 250 V AC.
LOW LEVEL/DRY CIRCUIT OR POWER
GOLD 3
TIN-LEAD 6
GOLD OVER SILVER 2,3
G
L
6 AMPS @ 120 V AC OR 28 V DC; 3 AMPS @ 250 V AC.POWER
SILVER 5
TIN-LEAD 6
SILVER 4,5
Q (STD.)
M
0.4 VA MAX. @ 20 V AC OR DC MAX.LOW LEVEL/DRY CIRCUIT
GOLD 1
TIN-LEAD 6
GOLD 1
B (STD.)
K
RATINGS
TERMINAL
PLATING
CONTACT
MATERIAL
OPTION
CODE
CONTACT MATERIAL/APPLICATION RECOMMENDATIONS–SEE SECTION N.
1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2END CONTACTS: Coin silver, with gold plate over nickel plate.
3CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate
over nickel plate.
4 END CONTACTS: Coin silver, silver plated.
5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated.
6 TERMINALS: Copper alloy, with tin-lead alloy over nickel plate.
All models with all options when ordered with G, L, M or Q contact material.
B contact material standard with all terminations except C, Z, Z3..
Q contact material standard with C, Z, Z3 terminations.
K, L, M contact materials not available with Z, Z3 terminations.
SEAL
DNO EPOXY SEAL IEPOXY POTTED BASEE(STD.) EPOXY SEAL
Fits Z3 Termination
female connector
PART NO.
530100000
Available in loose pieces.
NOTE: Available with C, W, W3, Z, Z3 terminations only.
