T Series Subminiature Toggle Switches Features/Benefits * Compact size--small footprint * Single and double pole models * PC and panel mount Typical Applications * Hand-held telecommunications * Instrumentation * Medical equipment options available * RoHS compliant models available Models Available Specifications Materials CONTACT RATING: B contact material: 0.4 VA max. @ 20 V AC or DC max. Q contact material (TX01 models): 3 AMPS @ 120 V AC or 28 V DC. All other models: 2 AMPS @ 120 V AC or 28 V DC. See page F-37 for additional ratings. ELECTRICAL LIFE: TX01 models: 60,000 make-and-break cycles at full load. All other models: 30,000 cycles. CONTACT RESISTANCE: Below 20 m typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 min. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: -30C to 85C. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or diallyl phthalate (DAP), (UL 94V-0) or glass filled nylon 4/6, flame retardant, heat stabilized. ACTUATOR: Brass, chrome plated. BUSHING: Brass, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass, matte-tin plated. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See above for additional contact materials. CENTER CONTACTS & TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page F-42 for additional contact materials. TERMINAL SEAL: Epoxy. HARDWARE: Nut & Locking Ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. Additional hardware available separately, see Section N. NOTE: Any models supplied with P, R, Q, B or G contact material are RoHS compliant and compatible. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages F-33 thru F-37. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all "bottom-wash" PCB cleaning methods. Switch Function T101 SPDT On-None-On T102 SPDT Off-None-On T103 SPDT On-Off-On T105 SPDT Mom.-Off-Mom. T107 SPDT On-Off-Mom. T108 SPDT On-None-Mom. T201 DPDT On-None-On T203 DPDT On-Off-On T205 DPDT Mom.-Off-Mom. T207 DPDT On-Off-Mom. T208 DPDT On-None-Mom. T211 DPDT On-On-On. Actuator P3 Flatted, anti-rotation, .490" high S .370" high K Locking lever, round tip L1 .640" high M1 .220" high S1 .410" high M .210" high L .290" high Bushing H .220" high, threaded, flat H9 .220" high, unthreaded, flat CF Splashproof, .310" high, threaded, flat D9 .260" high, unthreaded, keyway T .310" high, threaded, flat T9 .310" high, unthreaded, flat TD .260" high, threaded, keyway TK .310" high, threaded, keyway Y .220" high, threaded, keyway Y9 .220" high, unthreaded, keyway Toggle F Terminations A Right angle, PC thru-hole AV Vertical right angle, PC thru-hole C PC Thru-hole V3 Vertical mount V-bracket Z Solder lug W Wire wrap Seal E Epoxy Contact Material B Gold P Gold, matte tin Q Silver G Gold over silver R Gold over silver, matte-tin Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F-32 www.ck-components.com T Series Subminiature Toggle Switches SWITCH FUNCTION SWITCH FUNCTION POS. 1 POS. 2 POS. 3 NO. POLES MODEL NO. T101 POS. 1 C&K marking on opposite side ON NONE ON OFF ON T105 MOM. OFF MOM. POS. 3 C&K marking on opposite side ON T103 CONNECTED TERMINALS POS. 2 SCHEMATIC 2-3 N/A 2-1 2-3 OPEN 2-1 SP T107 ON OFF MOM. T108 ON NONE MOM. 2-3 NA 2-1 SPDT T102 OFF NONE ON OPEN N/A 3-1 SPST SPDT .338 (8,57) Part number shown: T101SHZQE SWITCH FUNCTION POS. 1 POS. 2 POS. 3 NO. POLES DP MODEL NO. POS. 1 C&K marking on opposite side T201 ON NONE ON T203 ON OFF ON T205 MOM. OFF MOM. T208 ON NONE T211* ON ON CONNECTED TERMINALS POS. 2 POS. 3 SCHEMATIC C&K marking on opposite side 2-3,5-6 N/A 2-1,5-4 2-3,5-6 OPEN 2-1,5-4 MOM. 2-3,5-6 N/A 2-1,5-4 ON. 2-3,5-6 2-3,5-4 2-1,5-4 DPDT DPDT .338 (8,57) Terminal Nos. For Reference Only Part number shown: T201SHZQE F All models Toggle MOM. = Momentary * Wiring for 3-way switch refer to page N-10 with all options when ordered with G, L, R or Q contact material. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F-33 www.ck-components.com T Series Subminiature Toggle Switches ACTUATOR M S .210" HIGH M1 .370" HIGH S1 .220" HIGH (with "T" bushing) .410" HIGH (with "T" bushing) 2 1 1 2 .214 (5,44) Standard with A, AV or V3 terminations. L .290" HIGH L1 Standard with Z, C or W terminations. P3 .640" HIGH ANTI-ROTATION, FLATTED, .450" HIGH 2 1 Actuator shown with standard H bushing. Subtract .040 (1,02) for TD and D9 bushings, subtract .090 (2,29) for T, T9, TK, K9 & CF bushings. 1 2 Actuators shown with T, T9, TK & CF bushings, add .050 (1,27) for TD and D9 bushings, add .090 (2,29) for H, H9, Y & Y9 bushings. All actuators have chrome finish (except K). Available with T & T9 bushings only. Dress nut part number 709901201 supplied standard with threaded bushing. K LOCKING LEVER Locking Positions -01 & -02 Models 2 Position lock -03 & -11 Models 3 Position lock -08 Models 1 Position lock K actuators have natural aluminum finish. Not available with CF bushing option. Bushing option code not required. Not available with TX05 & TX07 models. Keyway on right side. To prevent accidental actuation, toggles must be lifted before being actuated. When released, toggles again lock in place. Overtightening mounting nut may cause actuator to bind. BUSHING H H9 .220" HIGH THREADED, FLAT .220" HIGH UNTHREADED, FLAT Y Y9 .220" HIGH THREADED, KEYWAY .220" HIGH UNTHREADED, KEYWAY T T9 .310" HIGH THREADED, FLAT .310" HIGH UNTHREADED, FLAT Toggle F H standard with C, W & Z terminations. H9 standard with A, AV & V3 terminations. Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F-34 www.ck-components.com T Series Subminiature Toggle Switches BUSHING TK .310" HIGH THREADED, KEYWAY TD .260" HIGH THREADED, KEYWAY CF D9 .260" HIGH UNTHREADED, KEYWAY SPLASHPROOF, .310" HIGH THREADED, FLAT IP67 Degree of protection. Internal o-ring actuator seal and external bushing seal washer standard. Not available with K locking lever option. PANEL MOUNTING 10-48 BUSHING With Standard Locking Ring Without Locking Ring Without Locking Ring 1/4 IN. BUSHING Without Locking Ring Without Locking Ring With Small Locking Ring With Standard Locking Ring TERMINATIONS Z C SOLDER LUG PC THRU-HOLE SP SP DP DP PC MOUNTING Not available with P or R contact materials. W T102 - omit center hole. WIRE WRAP SP DP F Toggle Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F-35 www.ck-components.com T Series Subminiature Toggle Switches TERMINATIONS A RIGHT ANGLE, PC THRU-HOLE PC MOUNTING .214 (5,44) .022 (0,56) .128 (3,25) T101MH9ABE Horizontal Actuation Actuator Shown In Pos. 1 SPDT Not available with T102 model. A RIGHT ANGLE, PC THRU-HOLE PC MOUNTING T201MH9ABE Horizontal Actuation DPDT Actuator Shown In Pos. 1 AV VERTICAL RIGHT ANGLE, PC THRU-HOLE PC MOUNTING .214 (5,44) .026 (0,66) .153 (3,89) T101MH9AVBE Actuator Shown In Pos. 1 Vertical Actuation SPDT T102 Models: Omit terminal 2 NOTE: Terminal bend radii and lead-in manufacturing option. AV VERTICAL RIGHT ANGLE, PC THRU-HOLE PC MOUNTING Actuator Shown In Pos. 1 T201MH9AVBE Vertical Actuation DPDT NOTE: Terminal bend radii and lead-in manufacturing option. V3 VERTICAL MOUNT, V-BRACKET PC MOUNTING Toggle F Actuator Shown In Pos. 1 .214 (5,44) .358 (9,08) T101MH9V3BE T102 Models: Omit center hole. SPDT T102 Models: Omit terminal 2 Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F-36 www.ck-components.com T Series Subminiature Toggle Switches TERMINATIONS V3 VERTICAL MOUNT, V-BRACKET PC MOUNTING T201MH9V3BE DPDT Actuator Shown In Pos. 1 CONTACT MATERIAL OPTION CODE B CONTACT MATERIAL TERMINAL PLATING GOLD 1 GOLD 1 LOW LEVEL/ MATTE-TIN 6 DRY CIRCUIT SILVER 5 POWER P Q G R SILVER 4,5 RATINGS 0.4 VA MAX. @ 20 V AC OR DC MAX. TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC. GOLD OVER GOLD 3 LOW LEVEL/DRY SILVER 2,3 MATTE-TIN 6 CIRCUIT OR POWER TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 2 AMPS @ 120 V AC OR 28 V DC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. All models 2 END CONTACTS: Coin silver, with gold plate over nickel plate. B contact material standard with A, AV, V3 & W terminations. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. Q contact material standard with C & Z terminations. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with matte-tin over nickel plate. with all options when ordered with R, G, or Q contact material. SEAL E EPOXY SEAL AVAILABLE HARDWARE .331 (8,4) SEALING BOOT .658 (16,7) 759D02000 Toggle * Note: For use with S1 actuator style when combined with T, TK, and CF bushings. F .524 (13,3) 1/4-40 uns-2A nut Dimensions are shown: Inches (mm) Specifications and dimensions subject to change F-37 www.ck-components.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: C&K Components: T101MH9V3BE T103SHV3QE T103SH9V3BE T101MHZQE T101STKCQE T201KZBE T211M1TAVBE T101MCFZGE T103SHZQE T203SHZQE T103SHCQE T103SCFCQE T101KAKE T101KZQE T201MY9V3BE T201SHCQE T101MH9ABE T101MH9AVBE T101SHCQE T201MH9ABE T101SHZQE T201SHZQE T203S1TDZGE T102LHZQE T105SHZQE T107P3T9ALE T207SHZQE T207SHZBE T101MHZBE T201LHCGE T211STKCQE T101KH9AK T101STDCBE T101LHZQE T101MH9AVQE T101S1H9V3BE T101SK9V3BE T201MH9AQE T105SH9AVME T101L1H9CQE T101MHAVBE T103LTDZQE T103MY9CQE T105LHZQE T107MHZBE T208SH9AVBE T101L1Y9V3BE T101M1H9ABE T101M1HCBE T101M1TAVBE T101MHV3PE T101MY9CBE T101S1HABE T101S1T9ZBE T101S1TAGE T101S1TDZQE T101SCFABE T101SCFZBE T101SH9AGE T101SH9AVGE T101SH9AVQE T101SHCGE T101SHV3BE T101SYCQE T102M1HZBE T102MH9AVBE T102MHAVBE T102S1TZQE T102SHWBE T102SHWQE T103KAKE T103KCQE T103KZBE T103LTZQE T103M1H9AKE T103M1TAGE T103MHABE T103MHCRE T103MTAGE T103P3TAGE T103P3TCBE T103S1HAQE T103S1T9CQE T103S1T9V3QE T103S1TCQE T103S1YZBE T103SCFALE T103SH9ABE T103SH9CBE T103SHWQE T103STAGE T103STZQE T105L1HZBE T105M1H9AVBE T101KCBE T102P3T9V3PE T201S1TDZGE T101MYZBE T101KABE T101KAVBE