2.28 (57.90) 0.50 (12.70) SIDE VIEW S E R I E External Output Trim TRIM DOWN TRIM UP -VIN (4) -SENSE -SENSE OUTPUT SPECIFICATIONS: Voltage Accuracy : .................................................................. 1.5% max. Transient Response :75% to 100% Step Load Change Error Band........................3.3V6% Vout, Othhers5% Vout Recover Time........................................................<500uS External Trim Adj. Range6 .................................................................. 10% Ripple & Noise, 20MHz BW 3 3.3V & 5V ...........................40mV RMS, max. 100mV pk-pk, max. 12V & 15V ..........................60mV RMS, max. 150mV pk-pk, max. 24V .................................100mV RMS, max. 240mV pk-pk, max Temperature Coefficient............................................................ 0.03%/C Short Circuit Protection............................................................Continuous Line Regulation1...................................................................... 0.2% max. Load Regulation2................................................................... 0.2% max. Over Voltage Protection trip Range ,% Vo nom. .........................115-140% Current Limit ...............................................110% ~160% Nominal Output Features 100W Isolated Output Quarter-Brick Package 4 : 1 Input Range Efficiency up to 88% * * * * Regulated Outputs Continuous Short Circuit Protection OTP / OVP / OCP 1500VDC Isolation PIN CONNECTION Pin Function 1 +V Input 2 ON/OFF 3 -V Input 4 -V Output 5 -Sense 6 Trim 7 +Sense 8 +Vout GENERAL SPECIFICATIONS: Efficiency........................................................................................See Table Isolation Voltage .......................Input/Output.................... 1500VDC min. Input/Case.......................1500VDC min. Output/Case....................1500VDC min. Isolation Resistance .................................................................107 ohm min. Switching Frequency ............................................................ 250KHz, Typ. Power De-rating Curve...................................refer to Application Note Operating Case Temperature .......................................-40C to 100C Storage Temperature Range........................................-40C to +105C Thermal Shutdown, Case Temp. .......................................... 110C Typ. Dimensions.......................1.45 x 2.28 x 0.50 inches(36.8 x 57.9 x 12.7 mm) Case Material ..............................Aluminum Base-plate with Plastic Case Weight...................................................................................... ...TBD NOTE: 1. Measured From High Line to Low Line 2. Measured From Full Load to min. Load 3. The output noise is measured with 10uF tantalum capacitor and 1uF ceramic capacitor across output 4. Logic Compatibility .................. Open Collector ref to -Input Module ON .......... >3.5Vdc to 75Vdc or Open Circuit Module OFF ........... < 1.2Vdc 5. Suffix "N" to the Model Number with Negative Logic Remote ON/OFF Module ON .......... < 1.2Vdc Module OFF ........... >3.5Vdc to 75Vdc or Open Circuit 6. Trim-up..............connect a resistor between the trim pin and +Sense Trim-down...........connect a resistor between the trim pin and -Sense SIZE QB OUTPUT VOLTAGE CQB100W-48S3V3 18-75VDC 3.3VDC OUTPUT CURRENT INPUT CURRENT MIN. MAX. NO LOAD FULL LOAD 0mA 30 A 60mA 2344mA % EFF. SIZE 88 Quarter-Brick 2.28 (57.9) 4 5 6 7 8 0mA 20 A 60mA 2367mA 88 Quarter-Brick 0.600 (15.24) 5.0VDC 1.03 (26.2) 18-75VDC 1.45 (36.8) 3 CQB100W-48S05 Mounting Inserts M3x0.5 Through 4pl. 2.000 (50.80) 2 1 BOTTOM VIEW 18-75VDC 12 VDC 0mA 8.3A 30mA 2358mA 88 Quarter-Brick 18-75VDC 15 VDC 0mA 6.7 A 30mA 2379mA 88 Quarter-Brick CQB100W-48S24 18-75VDC 24 VDC 0mA 4.17 A 30mA 2369mA 88 Quarter-Brick 0.040 DIA 6PLACES (1.02) 0.50 (12.7) CQB100W-48S15 1.86(47.2) 0.16 (4.1) min. CQB100W-48S12 0.600 (15.24) INPUT VOLTAGE All Dimensions In Inches(mm) Tolerance Inches: x.xx= 0.02, x.xxx= 0.010 Millimeters: x.x= 0.5, x.xx= 0.25 0.300 (7.62) MODEL NUMBER 10K ohms TRIMPOT TRIM TRIM DISABLE OUTPUT S +SENSE +SENSE INPUT SPECIFICATIONS: Input Voltage Range.................................48V........................18 - 75V ON/OFF (2) Under voltage lockout ...............48Vin power up.......................17V typ. power down......................16V typ. Input Filter .......................................................................... ...Pi Type Positive Logic Remote ON/OFF ( see note 4 & 5 ) HIGH SIGNAL HERE 100 WATT 4:1 INPUT RANGE DC-DC CONVERTERS * * * * Specifications NOTE: 1. Nominal Input Voltage 48 VDC All Specifications Typical At Nominal Line, Full Load and 25C Unless Otherwise Noted. 0.059 DIA 2PLACES (1.50) C Q B 1 0 0 W CQB100W NEW