DO NOT
SCALE FROM
THIS PRINT
HSEC8-1XXX-XX-XX-DV-X-XX
No OF POSITIONS
ROW SPECIFICATION
-DV: DUAL VERTICAL
(USE HSEC8-XXX-01-DV-X)
CARD THICKNESS
(SEE NOTE 6 & 7)
PLATING SPECIFICATION
-SM: SELECTIVE GOLD/MATTE TIN TAIL
(USE C-188-01-S)
-H: HEAVY GOLD
(USE C-188-01-H)
-S: SELECTIVE GOLD/MATTE TIN TAIL
(USE C-188-01-S)
OPTION
-K: POLYAMIDE FILM PAD(SEE FIG. 3)
(USE K-DOT-.217-.313-.005)
-TR: TAPE & REEL
(-10 THRU -70 POS ONLY)
(LEAVE BLANK FOR TRAY)
**-L: LATCHING OPTION.
NOT AVAILABLE FOR -GR TYPE USE
(USE HSEC8-XX-01-DV-A-L)
(AVAILABLE IN **-13, **-25, **-37
& **-49 POSITIONS ONLY)
(SEE SHEET 3, FIG. 4)
**-BL: BOARD LOCK OPTION.
NOT AVAILABLE FOR
-GR TYPE USE
(USE HSEC8-XXX-01-DV-XX-BL)
(SEE SHEET 4, FIG. 5)
**-GR: GUIDE RAILS
NOT AVAILABLE FOR
-L; -BL TYPE USE (SEE SHEET 5, FIG. 6)
(USE HSEC8-XXX-01-DV-XX-GR)
-A: ALIGNMENT PINS
(USE HSEC8X-XXX-XX-DV-A)
(LEAVE BLANK FOR NO -A &
USE HSEC8X-XXX-XX-DV-LC)
OPTION
-10, -20, & -30 (SEE FIG. 1)
**-13,** -25,** -37,** -40, **-49,
-50, & -60 (SEE FIG. 2)
-70, -80, -90 & -100 (PER ROW)
T
(No OF POS x 0.800 [.0315]) + 1.40[.055] REF
(No OF POS x 0.800 [.0315]) + 4.60 [.181] REF
"P" REF
"T" REF
"Q" REF
0.800
±0.05
.0315
±.002
(TOL NON ACCUM)
(No OF POS -1 ) x 0.800 [.0315]
2.70 .11
REF
"A"
"A"
01
59
60
02
C1
C
L
C2
7.80 .31
REF
3.60 .14
REF
1.12
REF (TYP)
.04 1.32
REF
.05
(2 PLCS)
(No OF POS x 0.800[.0315]) + 2.200[.0866] REF
POSITION #1
INDICATOR
SEE TABLE 5
L
C
1.50 .06
REF
0.80
±0.05
.0315
±.002
(TOL NON ACCUM)
((No OF POS -1 ) x 0.800 [.0315])
0.08[.003]
C
L
C7
C6
7.98
±0.15
.314
±.006
(TYP)
"Y"
0.20
"V"
0.10
3.03 .12
REF
"W" REF
SECTION "A"-"A"
C-188-01-XX
C3
C5
C4
L
C
C11
SEE TABLE 1
DESIGNED & DIMENSIONED
IN MILLIMETERS
(INCHES FOR REFERENCE ONLY)
FIG. 1
FOR POSITIONS -10, -20 & -30
(SHOWN: HSEC8-130-01-XX-D-DV-A)
C
(* = NOT RELEASED FOR PRODUCTION)
(** =
AVAILABLE ONLY WITH -01 CARD THICKNESS)
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS.
TOLERANCES ARE:
DECIMALS ANGLES
.X:
.3 [.01] 2
.XX:
.13 [.005]
.XXX:
.051 [.0020]
MATERIAL:
0.8mm HIGH SPEED ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
01/24/03
5
1
SHEET SCALE: 2.5:1
INSULATOR: LCP,
COLOR: -01 LEAD STYLE BLACK,
-02 THU -04 LEAD STYLES NATURAL
CONTACT: BeCu
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. BURR ALLOWANCE: 0.04[.0015] MAX.
3. MINIMUM PUSHOUT FORCE: 2.2 NEWTONS.
4. ALL TAIL TO TAIL DIMENSIONS MEASURED TIP TO TIP.
5. ASSEMBLIES TO BE PACKAGED IN TRAYS.
6. CARD THICKNESS OPTION
-01:1.57mm[.062] THICK CARD USE HSEC8-XXX-01-DV-XX
*-02: 2.00mm[.079] THICK CARD USE HSEC8A-XXX-02-DV-XX
FOR POSITIONS 10, 20, 30, 40, 50 AND 60 ONLY.
*-03: 2.36mm[.093] THICK CARD USE HSEC8A-XXX-03-DV-XX
FOR POSITIONS 10, 20, 30, 40, 50 AND 60 ONLY.
*-04: 3.18mm[.125] THICK CARD USE HSEC8A-XXX-04-DV-XX
FOR POSITIONS 10, 20, 30, 40, 50 AND 60 ONLY.
7. MATING EDGE CARD THICKNESS TOLERANCE TO BE +/-0.15[.006].
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION T
(No OF POS x 0.800[.0315]) + 7.80[.307] REF
"D" REF
0.800 .0315
(TOL NON-ACCUM)
"B" SPACES @ .800 = "C"
4.00 .16
(No OF POS + 3) x 0.800[.0315]
2.70 .11
REF
01
02
119
120
C9
C10
C8
((No OF POS + 6) x 0.800[.0315]) + 0.60[.024] REF
C
L
"R"
"K"
"S"
"H"
FIG. 3
-K OPTION
(USE K-DOT-.217-.313-.005
)
13.83
±0.15
.54
±.006
"U"
0.13
FOR POSITIONS **-13, **-25, **-37,
-40, **-49, -50, -60, -70, -80, -90, -100
(SAME AS FIG. 1, UNLESS OTHERWISE STATED)
(SHOWN: HSEC8-160-01-XX-DV-A)
FIG. 2
IN-PROCESS
(** =
AVAILABLE ONLY WITH
-01 CARD THICKNESS)
SHEET OF
0.8mm HIGH SPEED ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
01/24/03
5
2
SHEET SCALE: 2.25:1
REVISION T
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
(No OF POS x 0.80[.0315]) + 18.40[.724] REF
"C"
"C"
"D"
"D"
HSEC8-XX-01-DV-A-L
5.19 .20
1.59 .06
(No OF POS x 0.80[.0315]) + 14.90[.587]
2
MAX SWAY
(EITHER DIRECTION)
SECTION "C"-"C"
**-L: LATCHING OPTION
AVAILABLE IN -13, -25, -37 & -49 POSITIONS ONLY
NOT AVAILABLE FOR -GR TYPE USE
(SAME AS FIG. 2, UNLESS OTHERWISE STATED)
(SHOWN: HSEC8-137-01-XX-DV-A-L)
(** =
AVAILABLE ONLY WITH -01 CARD THICKNESS)
FIG. 4
C11
C13
7.74
REF
.30
0.64
REF
.03
SECTION "D"-"D"
WT-25-02-T
SHEET OF
0.8mm HIGH SPEED ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
01/24/03
5
3
SHEET SCALE: 3:1
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
REVISION T
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
"E" REF
"E"
"E"
"F"
"F"
"H"
"H"
7.74 .30
REF
0.64 .03
REF
1.50 .06
SECTION "H"-"H"
WT-25-02-T
C14
SECTION "F"-"F"
SCALE 2.5 : 1
2.10
-
0.8
+
0.5 .083
-
.03
+
.02
12.04 .47
REF
1.33
±0.5
.05
±.020
"F"
2
MAX SWAY
(EITHER DIRECTION)
SECTION "E"-"E"
SCALE 2.5 : 1
HSEC8-XXX-01-DV-XX-BL
LTC-04
C12
C13
**-BL: BOARD LOCK OPTION
NOT AVAILABLE FOR -GR TYPE USE
(SAME AS FIG. 2, UNLESS OTHERWISE STATED)
(SHOWN: HSEC8-160-01-XX-DV-A-BL)
(** =
AVAILABLE ONLY WITH -01 CARD THICKNESS)
FIG. 5
SHEET OF
0.8mm HIGH SPEED ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
01/24/03
5
4
SHEET SCALE: 2.5:1
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
REVISION T
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
2.30
REF
.091
11.75
REF
.463
"J"
"J"
0.70
REF
.028
4.40 .173
REF
4.60 .181
REF
1.75
REF
.069
SECTION "J"-"J"
FIG. 6
**-GR: GUIDE RAILS OPTION
AVAILABLE IN -10, -20, -30, -40,-50, & -60 POSITIONS ONLY
NOT AVAILABLE FOR -L; -BL TYPE USE
(SAME AS FIG. 2, UNLESS OTHERWISE STATED)
(SHOWN: HSEC8-160-01-XX-DV-A-GR)
(** =
AVAILABLE ONLY WITH -01 CARD THICKNESS)
T
SHEET OF
0.8mm HIGH SPEED ASSEMBLY
BY:
HSEC8-1XXX-XX-XX-DV-X-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
01/24/03
5
5
SHEET SCALE: 2:1
REVISION T
F:\DWG\MISC\MKTG\HSEC8-1XXX-XX-XX-DV-X-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
