cPCI Series (2mm) cPCI Series (2mm) Connectors Interchangeable with cPCI COTS Systems * * * * * * Hi-Rel and Space Grade Versions Standard 2mm Footprint of cPCI PICMG 2.0 Immune to Shock and Vibration LCP Insulator meets NASA Outgassing Requirements Compatible with IEC 1076-4 101 Press-Fit Termination also available for Receptacle Assembly: Consult Factory * NASA GSFC Qualified Part Numbers Available Subject to Export Control Procedure Qualification Testing The 2mm cPCI family of connectors meets MIL-DTL-55302, EEE-INST-002, GEVS-SE Rev. A, and NASA GSFC S-311-P-822 specifications. Testing includes but is not limited to: LLCR: Low Level Contact Resistance IR: Insultation Resistance DWV: Dielectric Withstanding Voltage MFG: Mixed Flowing Gas CRD: Contact Resistance S & V: Shock and Vibration General Specifications QCI (Quality Conformance Inspections) K2 Series = MIL-DTL-55302 311P Series = NASA GSFC S-311-P-822 3U / 6U Form Factor Part Number Reference P1 / P4 P2 / P5 P3 J1 / J4 J2 / J5 J3 K2A110FMD K2B110FMD K2B95FMD K2A110FFD K2B110FFD K2B95FFD Design Criteria IEC 1076-4 101 Contact Gender Male Pin Contact Termination Hypertac 0.40mm socket Solder tail tin/lead (63/37) per MIL-P-81728 Contact Spacing 2.00mm 110 signal 22 ground Number of Contacts 95 signal 19 ground Contact Current Rating 95 signal 19 ground 1 Amp Temperature Range -55 C to 125 C Insulator Material 30% Glass Filled LCP (meets NASA outgassing specification) Flammability Rating 94 V-O Insulation Resistance > 5000 megohm Contact Material Beryllium copper pin contacts Mating Contact Plating Beryllium copper Hypertac socket wires and brass body 50in gold / 50in nickel Maximum Allowable Gap Between Mating Connectors 0.059 [1.50] Suggested Printed Circuit Board Hole Diameter Weight 110 signal 22 ground 0.70mm after plating 0.55 oz. 0.53 oz. 0.60mm after plating 0.38 oz. 0.38 oz. 0.45 oz. 0.31 oz. Dimensions are in inches [mm] www.hypertronics.com 3/1 cPCI Series (2mm) Performance Specifications 3U / 6U Form Factor Part Number Reference P1 / P4 P2 / P5 P3 J1 / J4 J2 / J5 J3 K2A110FMD K2B110FMD K2B95FMD K2A110FFD K2B110FFD K2B95FFD CRD (Resistance at Rated Current) 4.85 milliohms average LLCR (Low Level Contact Resistance) 7.20 milliohms average DWV (Dielectric Withstanding Voltage) Contact Life (Mate / Demate) 1000V RMS > 4000 Cycles (per mated connector pair) Mating Force 16.38 LBF average (per mated connector pair) Demating Force 13.2 LBF average (per mated connector pair) Vibration (Sinusoidal)* Frequency 10 to 2000 HZ at 15 G (MIL-DTL-55302) Vibration (Random)** Flight chassis unit level vibration (NASA Goddard GEVS SE Rev A) Mechanical Shock* 100 G peak value (MIL-DTL-55302) * Testing was performed to determine if fretting occurs due to mechanical motion and to evaluate the integrity of the Hypertac contact system relative to severe shock. To validate the test, low nanosecond event detection was performed at 10 nanoseconds. There were no events recorded. ** Testing was performed using a 6U Flight Chassis to determine if fretting occurs due to mechanical motion and to evaluate the integrity of the test samples relative to severe mechanical environment. To validate the test, low nanosecond event detection was performed at 50 nanoseconds. There were no events recorded. 2mm Connector 2mm Connector Mated Pair Dimensions are in inches [mm] 3/2 www.hypertronics.com cPCI Series (2mm) J0/P0 High Speed Electrical Performance 1. Differential S-parameter 1, 2 0.00 0.00 -1.00 -2.00 S12 (dB) S11 (dB) -20.00 -40.00 -60.00 -3.00 -4.00 -5.00 -6.00 0.00 2.00 4.00 6.00 8.00 10.00 0.00 2.00 6.00 8.00 10.00 8.00 10.00 Frequency (GHz) 0.00 0.00 -1.00 -10.00 -2.00 -20.00 S22 (dB) S21 (dB) Frequency (GHz) 4.00 -3.00 -4.00 -30.00 -40.00 -5.00 -50.00 -6.00 0.00 2.00 4.00 6.00 8.00 10.00 0.00 2.00 Frequency (GHz) 4.00 6.00 Frequency (GHz) 2. Propagation Delay and Skew Propagation delay through the intrinsic connector assembly is estimated by making a measurement on the reflected signal received on the same broadband fixture that is used to obtain the full vector scattering parameters. In these measurements, there is no inclusion of any other pin lengths other than what is within the intrinsic connector. Connector Row Parameters A Propagation Delay (ps) Skew (ps) B 68 C 90 22 D 112 22 Maximum Data Rate2 134 22 E 156 22 3.125 Gb/s NOTES: 1) Pattern illustrated in the figure on next page was used in the S-parameter and cross talk measurements. 2) Please refer to the full characterization test report for details. Dimensions are in inches [mm] www.hypertronics.com 3/3 cPCI Series (2mm) 3. Connector Eye-Pattern-Diagram1, 2 622 Mb/s 1.25 Gb/s 0.00 -0.10 -0.20 -0.20 -0.30 -0.40 -0.50 -0.60 -0.60 0.50 1.00 1.50 Time (ns) 2.00 2.50 -0.50 -0.60 0.00 3.00 0.60 0.60 0.50 0.50 0.20 0.40 0.60 0.80 Time (ns) 1.00 1.20 1.40 1.60 0.00 -0.20 0.10 0.00 -0.10 -0.20 -0.30 -0.30 -0.40 -0.40 -0.50 -0.50 -0.60 -0.60 0.00 0.50 1.00 1.50 Time (ns) 2.00 2.50 0.30 0.10 0.00 -0.10 -0.20 Amplitude (V) TJ = 20.4 ps A = 1.19 V-ns W = 1.59 ns H = 0.97 V Hc = 0.97 V 0.60 0.80 Time (ns) 1.00 1.20 1.40 0.00 0.50 1.00 1.50 Time (ns) 2.00 2.50 0.50 0.40 0.40 TJ = 67.6 ps A = 1.06 V-ns W = 1.54 ns H = 0.89 V Hc = 0.89 V 0.10 0.00 -0.10 -0.20 -0.20 2.00 2.50 -0.50 -0.60 0.00 0.50 1.50 Time (ns) b 2.00 2.50 3.00 -0.70 0.45 0.50 0.55 0.60 0.65 TJ = 13.0 ps A = 191 V-ps W = 307 ps H = 0.85 V Hc = 0.82 V 0.00 -0.10 -0.20 0.00 0.20 0.40 0.60 0.80 Time (ns) 1.00 1.20 1.40 1.60 0.05 0.10 0.15 0.20 0.25 0.30 0.35 Time (ns) 0.40 0.45 0.50 0.55 0.70 0.60 0.50 0.40 0.30 0.20 0.10 0.00 -0.10 -0.20 -0.30 -0.40 -0.50 -0.60 -0.70 0.60 0.65 TJ = 38.3 ps A = 140 V-ps W = 282 ps H = 0.69 V Hc = 0.67 V 0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35 Time (ns) 0.40 0.45 0.50 0.55 0.60 0.65 a 1 and 2 c 1.00 0.40 0.10 0.00 -0.20 -0.40 -0.60 d 0.00 -0.30 -0.50 0.30 0.35 Time (ns) 0.20 3.00 TJ = 54.0 ps A = 474 V-ps W = 0.75 ns H = 0.83 V Hc = 0.82 V 0.10 -0.10 -0.40 0.25 -0.60 1.50 Time (ns) 0.20 -0.30 0.20 -0.50 1.00 Amplitude (V) -0.10 Amplitude (V) Amplitude (V) 0.00 0.15 -0.40 0.50 0.30 TJ = 67.6 ps A = 1.06 V-ns W = 1.54 ns H = 0.89 V Hc = 0.89 V 0.10 0.10 -0.30 0.40 0.20 0.05 0.30 0.20 0.50 0.30 -0.20 0.50 0.60 0.40 0.65 -0.10 0.00 0.70 0.50 0.60 TJ = 10.9 ps A = 197 V-ps W = 309 ps H = 0.89 V Hc = 0.86 V 0.00 0.60 0.00 0.60 0.55 0.10 0.60 3.00 0.50 0.20 1.60 -0.60 -0.60 0.45 -0.60 0.40 -0.50 -0.50 0.40 -0.50 0.20 -0.40 -0.40 0.30 0.35 Time (ns) -0.40 -0.30 -0.30 0.25 0.30 0.30 0.20 0.20 -0.30 0.00 3.00 0.15 0.40 TJ = 8.60 ps A = 0.59 V-ns W = 0.79 ns H = 0.98 V Hc = 0.98 V 0.20 Amplitude (V) -0.10 Amplitude (V) 0.00 0.10 0.50 0.30 0.10 0.05 0.60 0.40 TJ = 7.86 ps A = 1.22 V-ns W = 1.60 ns H = 0.99 V Hc = 0.99 V 0.20 0.40 e -0.20 -0.40 0.50 f 0.00 -0.10 -0.30 0.60 With Inclusion of Near End Cross Talk (Aggressor / Victim = 120%) 0.10 -0.50 0.00 TJ = 8.45 ps A = 203 V-ps W = 312 ps H = 0.89 V Hc = 0.86 V 0.20 -0.40 0.30 Amplitude (V) 0.00 -0.10 0.30 -0.30 0.40 Amplitude (V) 0.10 Amplitude (V) 0.10 0.40 0.20 Amplitude (V) Amplitude (V) 0.20 TJ = 7.04 ps A = 0.59 V-ns W = 0.79 ns H = 0.98 V Hc = 0.97 V 0.30 Amplitude (V) TJ = 3.91 ps A = 1.22 V-ns W = 1.60 ns H = 0.99 V Hc = 0.99 V 0.30 With Inclusion of Near End Cross Talk (Aggressor / Victim = 30%) 0.50 0.40 0.40 With Inclusion of Printed Circuit Board VIAs 0.60 0.50 0.50 Intrinsic 3.125 Gb/s 0.60 0.60 3 and 4 Differential Pairs Ground NOTES: 1) Pattern illustrated in the figure above was used in the S-parameter and cross talk measurements. 2) Please refer to the full characterization test report for details. Dimensions are in inches [mm] 3/4 www.hypertronics.com cPCI Series (2mm) K2A Male - K2A110FMDTBH Printed Circuit Board Layout K2A Female - K2A110FFDTABH Printed Circuit Board Layout Dimensions are in inches [mm] www.hypertronics.com 3/5 cPCI Series (2mm) K2B Male Printed Circuit Board Layout Connector Dimensions for K2B Male K2B95FMD K2B110FMD A 1.495 [37.98] 1.731 [43.98] B 1.417 [36.00] 1.654 [42.00] Dimensions are in inches [mm] 3/6 www.hypertronics.com cPCI Series (2mm) K2B Female Printed Circuit Board Layout Connector Dimensions for K2B Female K2B95FFD K2B110FFD A 1.495 [37.98] 1.731 [43.98] B 1.417 [36.00] 1.654 [42.00] Dimensions are in inches [mm] www.hypertronics.com 3/7 cPCI Series (2mm) Ordering Information K2 Connector Family A 110 F M D 4 TBH Plating K2 Connector Style* (Per IEC 1076-4-101) A = With multi-purpose center (MPC; polarization feature) B = Without MPC C = Extension module Number of Signal Pins 110 = 110 contacts 095 = 95 contacts Number of Rows E = No shields (5 row) F = Top shield (6 row) Contact Gender M = Male F = Female Terminal Styles D = Straight dip solder C = Compliant (TBD) (backplane only) Contact Terminal Length TAH = 50in gold over nickel (mating surface only) Other surfaces gold flash over nickel (female contacts only) TABH = Same as TAH with tin/lead (63/37) over nickel on contact terminations (female contacts only) TH = 50in gold over nickel (male contacts only) TBH = Same as TH with tin/lead (63/37) over nickel on contact terminations (male contacts only) Designation Backplane Connector Tail Length Daughter Board Connector Tail Length D 0.216 [5.50] 0.123 [3.12] D1 0.380 [9.65] TBD D2 0.630 [16.00] TBD D3 TBD TBD D4 0.166 [4.22] 0.166 [4.22] D5 0.265 [6.73] TBD Designation Backplane Connector Tail Length Daughter Board Connector Tail Length Quality Conformance Inspection = MIL-DTL 55302 Group A & B * Pin one location per IEC 1076-4-101 NASA Goddard Part Numbers and Ordering Information 311P822 MC 110 AS D4 Solder Tail Length Goddard Designator Connector MC = Male connector FC = Female connector Gender Designation MA = Male adapter FA = Female adapter FFA = Female-to-female adapter Number of Contacts 0.216 [5.50] 0.123 [3.12] 0.380 [9.65] TBD D2 0.630 [16.00] TBD D3 TBD TBD D4 0.166 [4.22] 0.166 [4.22] D5 0.265 [6.73] TBD 110 = 110 contacts 095 = 95 contacts Solder Tail Finish Connector Style D D1 G = Gold flash over nickel S = 63/37 tin/lead solder over nickel A = With multi-purpose center (MPC; polarization feature) B = Without MPC Quality Conformance Inspection = NASA GSFC S-311-P-822 Table II Dimensions are in inches [mm] 3/8 www.hypertronics.com cPCI Series (2mm) cPCI Test Adapters and Solder Fixtures* Designed to provide interface between commercial cPCI connectors and Hypertronics Hi-Rel cPCI connector series Subject to Export Control Procedure * Hypertronics adapters provide a simple way to interface with commercial test equipment * K2A110-0001, K2B110-0001 and K2B095-0001 adapt commercial cPCI daughter card connectors to Hypertronics backplane connectors * K2A110-0002, K2B110-0002 and K2B095-0002 adapt commercial cPCI backplane connectors to Hypertronics daughter card connectors *Adapters are not flight qualified cPCI 1 Up Solder Fixtures - ZK2 Series ZK2 series solder fixtures provide an economical method for stabilizing the socket contact during the hand soldering and reflow solder process for backplane connectors. Marking to include fixture part number, cage code and date code. Fixture Number Used with K2A A B ZK2095-005 K2B95FFDTABH 1.495 [37.98] 1.417 [36.00] ZK2110-008 K2B110FFDTABH 1.731 [43.98] 1.654 [42.00] ZK2110-007 K2A110FFDTABH 1.968 [49.98] 1.890 [48.00] Recommended 6U Solder Alignment Fixturing and Tooling Alignment Tool Description Work Instructions T2066 Standard Backplane cPCI 6U S50475 T2082 Standard 6U cPCI Daughtercard S50476 Consult factory for alignment tool and work instructions information Dimensions are in inches [mm] www.hypertronics.com 3/9 cPCI Series (2mm) cPCI Mated Adapter - K2xxx-0001 Used to mate a commercial daughter board connector to a Hypertronics mother board connector. K2A110-0001 K2B110-0001 K2B095-0001 Dimensions are in inches [mm] 3 / 10 www.hypertronics.com cPCI Series (2mm) K2A110-0001, K2B110-0001 and K2B095-0001 adapt commercial cPCI daughter card connectors to Hypertronics backplane connectors. K2A110-0001 K2B110-0001 K2B095-0001 Dimensions are in inches [mm] www.hypertronics.com 3 / 11 cPCI Series (2mm) cPCI Mated Adapter - K2xxx-0002 Used to mate a commercial mother board connector to a Hypertronics daughter board connector. K2A110-0002 K2B110-0002 K2B095-0002 Dimensions are in inches [mm] 3 / 12 www.hypertronics.com cPCI Series (2mm) K2A110-0002, K2B110-0002 and K2B095-0002 adapt commercial cPCI backplane connectors to Hypertronics daughter card connectors. K2A110-0002 K2B110-0002 K2B095-0002 Dimensions are in inches [mm] www.hypertronics.com 3 / 13 cPCI Series (2mm) MPC (Multi-Purpose Center) Keying Options Available Matching Codes Male Side (PCB) Keyset MPC Key P/N Matching Codes Female Side (Backplane) Keyset MPC Key P/N 1234 1236 1237 ZK2000-002-01 ZK2000-002-03 ZK2000-002-04 5678 4578 4568 ZK2000-001-01 ZK2000-001-03 ZK2000-001-04 1238 1246 1247 1268 1345 1348 1357 1358 1378 1457 1467 1478 1568 1678 2346 3467 3478 4678 ZK2000-002-05 ZK2000-002-07 ZK2000-002-08 ZK2000-002-14 ZK2000-002-16 ZK2000-002-19 ZK2000-002-21 ZK2000-002-22 ZK2000-002-25 ZK2000-002-27 ZK2000-002-29 ZK2000-002-31 ZK2000-002-33 ZK2000-002-35 ZK2000-002-37 ZK2000-002-59 ZK2000-002-61 ZK2000-002-69 4567 3578 3568 3457 2678 2567 2468 2467 2456 2368 2358 2356 2347 2345 1578 1258 1256 1235 ZK2000-001-05 ZK2000-001-07 ZK2000-001-08 ZK2000-001-14 ZK2000-001-16 ZK2000-001-19 ZK2000-001-21 ZK2000-001-22 ZK2000-001-25 ZK2000-001-27 ZK2000-001-29 ZK2000-001-31 ZK2000-001-33 ZK2000-001-35 ZK2000-001-37 ZK2000-001-59 ZK2000-001-61 ZK2000-001-69 Dimensions are in inches [mm] 3 / 14 www.hypertronics.com