U.S. CAGE Code 06324
www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2011 Glenair, Inc. Printed in U.S.A.
D
D-1
Dimensions in Inches (millimeters) are subject to change without notice.
Series 79
Cable
Connectors
HOW TO ORDER
Sample Part Number
790-024P C-13 M P
Base Part
Number
Shell Size -
Insert
Arrangements Shell Finish Hardware Option
790-024P
Cable Receptacle
with Pin Contacts
See Table 1 for
Available Insert
Arrangements.
To order a connector
without size #16 or #12
power pins, substitute
“W” instead of “P” in the
insert arrangement.
Example:
36P2 is supplied with 2
power pins.
36W2 is supplied less
the power pins.
See Section B for
coaxial contacts
purchased separately.
M
Electroless Nickel
general purpose
applications
MT
Nickel-PTFE
1000 Hour Grey™
maximum corrosion
protection and durability
(non-refl ective grey)
ZNU
Zinc-Nickel with Black
Chromate
tactical applications
(non-refl ective black)
Additional shell
fi nishes are listed on
page C-9.
N
Thru-Hole
No Hardware P
Female Jackpost
L
Low-Profi le Captivated
Jackscrew, Hex Head
K
Slot-Head Extended
Jackscrew
S
Low-Profi le Captivated
Screwlock, Hex Head
T
Slot-Head Extended
Captivated Screwlock
SPECIFICATIONS
Current Rating #23 5 AMPS, #16 13 A., #12 23 A.
Dielectric Withstanding
Voltage
#23 500 VAC RMS, #12 and #16 1800
VAC RMS
Insulation Resistance 5000 megohms minimum
Operating Temperature -65° C. to +150° C.
Shock 300 g.
Vibration 37 g.
MATERIALS AND FINISHES
Shell Aluminum alloy
Contacts Copper alloy, 50 microinches gold
plated
Insulators Liquid crystal polymer (LCP)
Retention Clips Beryllium copper alloy
Interfacial Seal, Grommet Flourosilicone rubber
Hardware 300 series stainless steel
Rugged, lightweight 790-024P connectors feature machined aluminum
shells, fl uorosilicone face seals and wire grommets for environmental
protection. Contacts are rear-release snap-in crimp type. Connectors are
supplied with crimp contacts packaged separately. Size #23 signal pins
accept up to #22 AWG wire. Size #16 contacts accept #16-18 AWG wire.
Size #12 contacts accept #12-14 AWG wire. Size 12 and 16 cavities also
accept coaxial contacts purchased separately. Connector shell features
a groove for attachment of a low-profi le EMI backshell adapter 799-015,
ordered separately.
790-024P Cable Receptacles
790-024P
Crimp Terminated Cable Receptacle Connector,
Pin Contacts
How To Order
PIN CONTACTS WITH CRIMP TERMINATION
U.S. CAGE Code 06324
Series 79
Cable
Connectors
www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2011 Glenair, Inc. Printed in U.S.A.
D
D-2
Dimensions in Inches (millimeters) are subject to change without notice.
SHELL
GROOVE FOR
EMI ADAPTER
PIN CONTACT
INTERFACIAL SEAL
FRONT INSULATOR
RETAINING CLIP
REAR INSULATOR
GROMMET
POTTING
WIRE (REF.)
CROSS-SECTIONAL VIEW OF 790-024P
TABLE 2 HARDWARE OPTION
.190 (4.83)
MAX
N
No Mating Hardware
Connector is supplied with thru-holes. Shell
sizes H and L are .148" (3.76) diameter, other
shell sizes are .092" (2.34) diameter. Accepts
standard Micro-D M83513 hardware.
P
Jackposts
Connector is supplied with removable
jackposts. Shell sizes H and L have #4-40
UNC thread, other sizes have #2-56 thread.
Stainless steel. Conforms to M83513/05.
.155
(3.94)
MAX
.925
(23.50)
MAX
L
Hex Head Jackscrews
Connector is supplied with stainless steel
non-removable low profile jackscrews. Shell
sizes H and L have #4-40 UNC thread, other
sizes have #2-56 thread.
K
Extended Jackscrews
Connector is supplied with stainless steel slot
head non-removable jackscrews. Shell sizes
H and L have #4-40 UNC thread, other sizes
have #2-56 thread.
.290 (7.37)
MAX
.925
(23.50)
MAX
S
Hex Head Screwlocks
Connector is supplied with stainless steel
non-removable low profile screwlocks. Shell
sizes H and L have #4-40 UNC thread, other
sizes have #2-56 thread. Screwlocks allow
the connector to be mated before the screws
are fastened.
T
Extended Screwlocks
Connector is supplied with stainless steel
non-removable slot head screwlocks. Shell
sizes H and L have #4-40 UNC thread, other
sizes have #2-56 thread. Screwlocks allow
the connector to be mated before the screws
are fastened.
Table I Contact Arrangements
Layout
Contact
Quantity
Face View
#23#16#12
A-5 5
B-2P2 2
B-9 9
C-13 13
D-15 15
D-3P3 3
D-7P2 52
E-11P2 92
E-19 19
E-7P3 43
F-15P2 13 2
F-23 23
F-5P5 5
G-33 33
H-10P4 64
H-29P7 22 7
H-36P2 34 2
H-54P2 52 2
H-5P5 5
H-66 66
J-17P4 13 4
J-25P2 23 2
J-33 33
J-7P7 7
K-27P4 23 4
K-35P2 33 2
K-43 43
K-9P9 9
L-6P6 6
L-78 78
M-102 102
790-024P
Crimp Terminated Cable Receptacle Connector,
Pin Contacts
How To Order
