VESDxx-02V www.vishay.com Vishay Semiconductors Single ESD-Protection Diode in SOD-523 FEATURES * Single-line ESD-protection * Low leakage current * ESD-immunity acc. IEC 61000-4-2 8 kV contact discharge 15 kV air discharge 2 1 20278 19344 * e3 - Sn * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 MARKING (example only) XY 20279 Bar = cathode marking X = date code Y = type code (see table below) ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL (8 mm TAPE ON 7" REEL) MINIMUM ORDER QUANTITY VESD01-02V VESD01-02V-G-08 3000 3000 VESD03-02V VESD03-02V-G-08 3000 3000 VESD05-02V VESD05-02V-G-08 3000 3000 VESD08-02V VESD08-02V-G-08 3000 3000 VESD12-02V VESD12-02V-G-08 3000 3000 PACKAGE DATA DEVICE NAME PACKAGE NAME TYPE CODE WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS UL 94 V-0 MSL level 1 (according J-STD-020) 260 C/10 s at terminals UL 94 V-0 MSL level 1 (according J-STD-020) 260 C/10 s at terminals UL 94 V-0 MSL level 1 (according J-STD-020) 260 C/10 s at terminals UL 94 V-0 MSL level 1 (according J-STD-020) 260 C/10 s at terminals UL 94 V-0 MSL level 1 (according J-STD-020) 260 C/10 s at terminals VESD01-02V SOD-523 . A 1.4 mg VESD03-02V SOD-523 . B 1.4 mg VESD05-02V SOD-523 . C 1.4 mg VESD08-02V SOD-523 . D 1.4 mg VESD12-02V SOD-523 . E 1.4 mg Rev. 1.1, 20-Jun-12 Document Number: 83367 1 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VESDxx-02V www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS VESD01-02V TEST CONDITIONS SYMBOL VALUE Peak pulse current Acc. IEC 61000-4-5, 8/20 s/single shot IPPM 7 A Peak pulse power Acc. IEC 61000-4-5, 8/20 s/single shot PPP 63 W 8 kV PARAMETER ESD immunity Operating temperature Contact discharge acc. IEC 61000-4-2; 10 pulses Air discharge acc. IEC 61000-4-2; 10 pulses Junction temperature Storage temperature VESD UNIT 15 kV TJ - 40 to + 125 C Tstg - 55 to + 150 C UNIT ABSOLUTE MAXIMUM RATINGS VESD03-02V TEST CONDITIONS SYMBOL VALUE Peak pulse current Acc. IEC 61000-4-5, 8/20 s/single shot IPPM 9 A Peak pulse power Acc. IEC 61000-4-5, 8/20 s/single shot PPP 108 W PARAMETER ESD immunity Operating temperature Contact discharge acc. IEC 61000-4-2; 10 pulses Air discharge acc. IEC 61000-4-2; 10 pulses Junction temperature Storage temperature VESD 8 kV 15 kV TJ - 40 to + 125 C Tstg - 55 to + 150 C UNIT ABSOLUTE MAXIMUM RATINGS VESD05-02V TEST CONDITIONS SYMBOL VALUE Peak pulse current Acc. IEC 61000-4-5, 8/20 s/single shot IPPM 6 A Peak pulse power Acc. IEC 61000-4-5, 8/20 s/single shot PPP 120 W PARAMETER ESD immunity Operating temperature Contact discharge acc. IEC 61000-4-2; 10 pulses Air discharge acc. IEC 61000-4-2; 10 pulses Junction temperature Storage temperature VESD 8 kV 15 kV TJ - 40 to + 125 C Tstg - 55 to + 150 C UNIT ABSOLUTE MAXIMUM RATINGS VESD08-02V TEST CONDITIONS SYMBOL VALUE Peak pulse current Acc. IEC 61000-4-5, 8/20 s/single shot IPPM 4 A Peak pulse power Acc. IEC 61000-4-5, 8/20 s/single shot PPP 120 W PARAMETER ESD immunity Operating temperature Contact discharge acc. IEC 61000-4-2; 10 pulses Air discharge acc. IEC 61000-4-2; 10 pulses Junction temperature Storage temperature VESD 8 kV 15 kV TJ - 40 to + 125 C Tstg - 55 to + 150 C UNIT ABSOLUTE MAXIMUM RATINGS VESD12-02V TEST CONDITIONS SYMBOL VALUE Peak pulse current Acc. IEC 61000-4-5, 8/20 s/single shot IPPM 2 A Peak pulse power Acc. IEC 61000-4-5, 8/20 s/single shot PPP 25 W PARAMETER ESD immunity Operating temperature Storage temperature Rev. 1.1, 20-Jun-12 Contact discharge acc. IEC 61000-4-2; 10 pulses Air discharge acc. IEC 61000-4-2; 10 pulses Junction temperature 8 kV 15 kV TJ - 40 to + 125 C Tstg - 55 to + 150 C VESD Document Number: 83367 2 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VESDxx-02V www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS VESD01-02V (Tamb = 25 C, unless otherwise specified) PARAMETER Protection paths Reverse stand-off voltage Reverse voltage Reverse current Reverse breakdown voltage Reverse clamping voltage Capacitance TEST CONDITIONS/REMARKS Number of lines which can be protected Max. reverse working voltage at IR = 100 A at VR = 1 V at IR = 1 mA at IPP (see fig. 1) at VR = 0 V; f = 1 MHz SYMBOL Nchannel VRWM VR IR VBR VC CD MIN. 1 1.5 - TYP. 9 180 MAX. 1 1 100 - UNIT lines V V A V V pF SYMBOL Nchannel VRWM VR IR VBR VC CD MIN. 3 4 - TYP. 12 110 MAX. 1 3 20 - UNIT lines V V A V V pF SYMBOL Nchannel VRWM VR IR VBR VC CD MIN. 5 6.5 - TYP. 20 55 MAX. 1 5 0.1 - UNIT lines V V A V V pF SYMBOL Nchannel VRWM VR IR VBR VC CD MIN. 8 9 - TYP. 30 35 MAX. 1 8 0.1 - UNIT lines V V A V V pF SYMBOL Nchannel VRWM VR IR VBR VC CD MIN. 12 14 - TYP. 25 30 MAX. 1 12 0.1 - UNIT lines V V A V V pF ELECTRICAL CHARACTERISTICS VESD03-02V (Tamb = 25 C, unless otherwise specified) PARAMETER Protection paths Reverse stand-off voltage Reverse voltage Reverse current Reverse breakdown voltage Reverse clamping voltage Capacitance TEST CONDITIONS/REMARKS Number of lines which can be protected Max. reverse working voltage at IR = 20 A at VR = 3 V at IR = 1 mA at IPP (see fig. 1) at VR = 0 V; f = 1 MHz ELECTRICAL CHARACTERISTICS VESD05-02V (Tamb = 25 C, unless otherwise specified) PARAMETER Protection paths Reverse stand-off voltage Reverse voltage Reverse current Reverse breakdown voltage Reverse clamping voltage Capacitance TEST CONDITIONS/REMARKS Number of lines which can be protected Max. reverse working voltage at IR = 0.1 A at VR = 5 V at IR = 1 mA at IPP (see fig. 1) at VR = 0 V; f = 1 MHz ELECTRICAL CHARACTERISTICS VESD08-02V (Tamb = 25 C, unless otherwise specified) PARAMETER Protection paths Reverse stand-off voltage Reverse voltage Reverse current Reverse breakdown voltage Reverse clamping voltage Capacitance TEST CONDITIONS/REMARKS Number of lines which can be protected Max. reverse working voltage at IR = 0.1 A at VR = 8 V at IR = 1 mA at IPP (see fig. 1) at VR = 0 V; f = 1 MHz ELECTRICAL CHARACTERISTICS VESD12-02V (Tamb = 25 C, unless otherwise specified) PARAMETER Protection paths Reverse stand-off voltage Reverse voltage Reverse current Reverse breakdown voltage Reverse clamping voltage Capacitance Rev. 1.1, 20-Jun-12 TEST CONDITIONS/REMARKS Number of lines which can be protected Max. reverse working voltage at IR = 0.1 A at VR = 12 V at IR = 1 mA at IPP (see fig. 1) at VR = 0 V; f = 1 MHz Document Number: 83367 3 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VESDxx-02V www.vishay.com Vishay Semiconductors 0.7 (0.028) 1.7 (0.067) 0.9 (0.035) 1.5 (0.059) 0.7 (0.028) 0.5 (0.020) 0.1 (0.004) max. 0.08 (0.003) 0.20 (0.008) PACKAGE DIMENSIONS in millimeters (Inches): SOD-523 1.3 (0.051) 1.1 (0.043) 0.4 (0.016) 0.35 (0.014) 0.18 (0.007) foot print recommendation: 1.45 (0.057) Document no.: S8-V-3880.02-001 (4) Rev. h - Date: 13. Oct. 2010 0.35 (0.014) 16864 Rev. 1.1, 20-Jun-12 Document Number: 83367 4 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000