SPEC NO: DSAL3683 REV NO: V.4B DATE: DEC/06/2011 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203000853
3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED
LAMP
Part Number: APBA3010SYKCGKC-GX
Super Bright Yellow
Green
Features
z3.0mmx1.0mm right angle SMT LED, 2.0mm thickness.
zLow power consumption.
zWide viewing angle.
zIdeal for backlight and indicator.
zVarious colors and lens types available.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zTinned pads for improved solderability
zRoHS compliant.
Description
The Super Bright Yellow device is made with AlGaInP (on
GaAs substrate) light emitting diode chip.
The Green source color devices are made with AlGaInP on
GaAs substrate Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAL3683 REV NO: V.4B DATE: DEC/06/2011 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203000853
Selection Guide
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APBA3010SYKCGKC-GX
Super Bright Yellow (AlGaInP)
Water Clear
80 120
Green (AlGaInP) 40 70
140°
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength
Super Bright Yellow
Green
590
574 nm IF=20mA
λD [1] Dominant Wavelength Super Bright Yellow
Green
590
570 nm IF=20mA
Δλ1/2 Spectral Line Half-width Super Bright Yellow
Green
20
20 nm IF=20mA
C Capacitance
Super Bright Yellow
Green
20
15 pF VF=0V;f=1MHz
VF [2] Forward Voltage Super Bright Yellow
Green
2
2.1
2.5
2.5 V IF=20mA
IR Reverse Current
Super Bright Yellow
Green 10
10 uA VR = 5V
Parameter Super Bright Yellow Green Units
Power dissipation 75 75 mW
DC Forward Current 30 30 mA
Peak Forward Current [1] 175 150 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Notes:
1.Wavelength: +/-1nm.
2.Forward Voltage: +/-0.1V.
*Wavelength value is traceable to the CIE127-2007 compliant national standards.
SPEC NO: DSAL3683 REV NO: V.4B DATE: DEC/06/2011 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203000853
APBA3010SYKCGKC-GX
Super Bright Yellow
SPEC NO: DSAL3683 REV NO: V.4B DATE: DEC/06/2011 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203000853
Green
SPEC NO: DSAL3683 REV NO: V.4B DATE: DEC/06/2011 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203000853
APBA3010SYKCGKC-GX
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Reel Dimension
Tape Dimensions
(Units : mm)
SPEC NO: DSAL3683 REV NO: V.4B DATE: DEC/06/2011 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.H.Wu ERP: 1203000853
PACKING & LABEL SPECIFICATIONS APBA3010SYKCGKC-GX
