19-2998; Rev 2; 2/07 KIT ATION EVALU LE B A IL A AV 0.1GHz to 3GHz, 75dB Logarithmic Detector/Controller Features Complete RF Detector/Controller The MAX2015 complete multistage logarithmic amplifier is designed to accurately convert radio-frequency (RF) signal power in the 0.1GHz to 3GHz frequency range to an equivalent DC voltage. The outstanding dynamic range and precision over temperature of this log amplifier make it particularly useful for a variety of base station and other wireless applications, including automatic gain control (AGC), transmitter power measurements, and received signal strength indication (RSSI) for terminal devices. The MAX2015 can also be operated in a controller mode where it measures, compares, and controls the output power of a variable-gain amplifier as part of a fully integrated AGC loop. This logarithmic amplifier provides much wider measurement range and superior accuracy compared to controllers based on diode detectors, while achieving excellent temperature stability over the full -40C to +85C operating range. 0.1GHz to 3GHz Frequency Range Exceptional Accuracy Over Temperature High Dynamic Range 2.7V to 5.25V Supply Voltage Range* Scaling Stable Over Supply and Temperature Variations Controller Mode with Error Output Shutdown Mode with Typically 1A of Supply Current Available in 8-Pin MAX(R) and TDFN Packages *See Power-Supply Connections section. MAX is a registered trademark of Maxim Integrated Products, Inc. Ordering Information PART Applications TEMP RANGE PINPACKAGE PKG CODE AGC Measurement and Control MAX2015EUA -40C to +85C 8 MAX U8-1 RF Transmitter Power Measurement MAX2015EUA-T -40C to +85C 8 MAX U8-1 RSSI Measurements T = Tape-and-reel. +Denotes lead-free and RoHS compliance. *EP = Exposed paddle. Ordering Information continued at end of data sheet. Cellular Base Station, WLAN, Microwave Link, Radar, and other Military Applications Functional Diagram VCC 1, 4 POWER DETECTORS INHI 2 50 INLO PWDN 7dB 7dB 8 7 7dB 3 OUT SET 20k 5 OFFSET AND COMMONMODE AMP 20k MAX2015 6 GND Pin Configuration appears at end of data sheet. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 MAX2015 General Description MAX2015 0.1GHz to 3GHz, 75dB Logarithmic Detector/Controller ABSOLUTE MAXIMUM RATINGS VCC (Pins, 1, 4) to GND.......................................-0.3V to +5.25V SET, PWDN to GND....................................-0.3V to (VCC + 0.3V) Input Power Differential INHI, INLO................................+23dBm Input Power Single Ended (INHI or INLO grounded).....+19dBm Continuous Power Dissipation (TA = +70C) 8-Pin MAX (derate 4.5mW/C above +70C) .............362mW 8-Pin TDFN (derate 18.5mW/C above +70C) .........1480mW Operating Temperature Range ...........................-40C to +85C Junction Temperature ......................................................+150C Storage Temperature Range .............................-65C to +150C Lead Temperature (soldering, 10s) .................................+300C Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS (MAX2015 typical application circuit (Figure 1), VS = +3.3V, fRF = 100MHz to 3000MHz, R1 = 0, R4 = 0, RL = 10k, TA = -40C to +85C, unless otherwise noted. Typical values are at TA = +25C, unless otherwise noted.) (Note 1) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS POWER SUPPLY Supply Voltage Supply Current VS ICC R4 = 75 1%, PWDN must be connected to GND 4.75 5.25 R4 = 0 2.7 3.6 V TA = +25C, VS = 5.25V, R4 = 75 17.3 TA = +25C 17.3 0.05 mA/C 1 A Supply Current Variation with Temp ICC TA = -40C to +85C Shutdown Current ICC VPWDN = VCC mA 20.5 CONTROLLER REFERENCE (SET) SET Input Voltage Range SET Input Impedance 0.5 to 1.8 V 40 k DETECTOR OUTPUT (OUT) Source Current Sink Current 4 mA 450 A Minimum Output Voltage VOUT(MIN) 0.5 V Maximum Output Voltage VOUT(MAX) 1.8 V 2 _______________________________________________________________________________________ 0.1GHz to 3GHz, 75dB Logarithmic Detector/Controller (MAX2015 typical application circuit (Figure 1), VS = +3.3V, fRF = 100MHz to 3000MHz, R1 = 0, R4 = 0, RL = 10k, TA = -40C to +85C, unless otherwise noted. Typical values are at TA = +25C, unless otherwise noted.) (Note 1) PARAMETER SYMBOL RF Input Frequency Range fRF Return Loss S11 Large-Signal Response Time CONDITIONS PIN = no signal to 0dBm, 0.5dB settling accuracy MIN TYP MAX UNITS 0.1 to 3 GHz -15 dB 150 ns -65 to +5 dBm 70 dB RSSI MODE--0.1GHz RF Input Power Range (Note 2) 3dB Dynamic Range TA = -40C to +85C (Note 3) Range Center -30 dBm Temp Sensitivity when TA > +25C TA = +25C to +85C, PIN = -25dBm +0.0083 dB/C Temp Sensitivity when TA < +25C TA = -40C to +25C, PIN = -25dBm -0.0154 dB/C Slope (Note 4) 19 mV/dB Typical Slope Variation TA = -40C to +85C -4 V/C Intercept (Note 5) -100 dBm Typical Intercept Variation TA = -40C to +85C 0.03 dBm/C -65 to +5 dBm 70 dB -30 dBm RSSI MODE--0.9GHz RF Input Power Range (Note 2) 3dB Dynamic Range TA = -40C to +85C (Note 3) Range Center Temp Sensitivity when TA > +25C TA = +25C to +85C, PIN = -25dBm 0.0083 dB/C Temp Sensitivity when TA < +25C TA = -40C to +25C, PIN = -25dBm -0.0154 dB/C Slope (Note 4) 18.1 mV/dB Typical Slope Variation TA = -40C to +85C -4 V/C Intercept (Note 5) -97 dBm Typical Intercept Variation TA = -40C to +85C 0.02 dBm/C -55 to +5 dBm RSSI MODE--1.9GHz RF Input Power Range (Note 2) 3dB Dynamic Range TA = -40C to +85C (Note 3) Range Center 60 dB -25 dBm Temp Sensitivity when TA > +25C TA = +25C to +85C, PIN = -25dBm 0.0033 dB/C Temp Sensitivity when TA < +25C TA = -40C to +25C, PIN = -25dBm -0.0138 dB/C 18 mV/dB -4.8 V/C Slope (Note 4) Typical Slope Variation TA = -40C to +85C _______________________________________________________________________________________ 3 MAX2015 AC ELECTRICAL CHARACTERISTICS MAX2015 0.1GHz to 3GHz, 75dB Logarithmic Detector/Controller AC ELECTRICAL CHARACTERISTICS (continued) (MAX2015 typical application circuit (Figure 1), VS = +3.3V, fRF = 100MHz to 3000MHz, R1 = 0, R4 = 0, RL = 10k, TA = -40C to +85C, unless otherwise noted. Typical values are at TA = +25C, unless otherwise noted.) (Note 1) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Intercept (Note 5) -83 dBm Typical Intercept Variation TA = -40C to +85C 0.03 dBm/C -45 to -5 dBm 40 dB RSSI MODE--2.5GHz RF Input Power Range (Note 2) 3dB Dynamic Range TA = -40C to +85C (Note 3) Range Center -25 dBm Temp Sensitivity when TA > +25C TA = +25C to +85C, PIN = -25dBm -0.0083 dB/C Temp Sensitivity when TA < +25C TA = -40C to +25C, PIN = -25dBm -0.0083 dB/C Slope (Note 4) 16.8 mV/dB Typical Slope Variation TA = -40C to +85C -8 V/C Intercept (Note 5) -81 dBm Typical Intercept Variation TA = -40C to +85C 0.03 dBm/C Note 1: The MAX2015 is guaranteed by design for TA = -40C to +85C, as specified. Note 2: Typical minimum and maximum range of the detector at the stated frequency. Note 3: Dynamic range refers to the range over which the error remains within the stated bounds. The error is calculated at -40C and +85C, relative to the curve at +25C. Note 4: The slope is the variation of the output voltage per change in input power. It is calculated by fitting a root-mean-square (RMS) straight line to the data indicated by RF input power range. Note 5: The intercept is an extrapolated value that corresponds to the output power for which the output voltage is zero. It is calculated by fitting an RMS straight line to the data. 4 _______________________________________________________________________________________ 0.1GHz to 3GHz, 75dB Logarithmic Detector/Controller fIN = 0.1GHz 1.8 2 3 MAX2015 toc02 3 MAX2015 toc01 2.0 fIN = 0.1GHz NORMALIZED TO DATA AT +25C fIN = 0.1GHz, TA = +85C NORMALIZED TO DATA AT +25C 2 1.6 TA = +85C 1.2 TA = +85C 1.0 0 VCC = 3.6V 1 ERROR (dB) 1 1.4 ERROR (dB) OUTPUT VOLTAGE (V) OUTPUT-VOLTAGE ERROR vs. INPUT POWER OUTPUT-VOLTAGE ERROR vs. INPUT POWER MAX2015 toc03 OUTPUT VOLTAGE vs. INPUT POWER TA = +25C 0 VCC = 2.7V VCC = 3.0V VCC = 3.3V -1 -1 0.8 TA = -40C TA = +25C 0.6 -2 -2 TA = -40C 0.4 -50 -40 -30 -20 -10 0 10 -70 0 1.8 -40 -30 -20 -10 -50 -40 -30 -20 -10 2 0 ERROR (dB) 1.2 TA = +85C 1.0 0 -1 TA = +25C TA = -40C -3 -70 10 TA = -40C -2 -60 -50 -40 -30 -20 -10 0 10 -70 -60 -50 -40 -30 -20 -10 INPUT POWER (dBm) INPUT POWER (dBm) OUTPUT-VOLTAGE ERROR vs. INPUT POWER OUTPUT-VOLTAGE ERROR vs. INPUT POWER OUTPUT VOLTAGE vs. INPUT POWER VCC = 3.6V VCC = 2.7V 1 ERROR (dB) 1 VCC = 3.0V -1 VCC = 2.7V 0 VCC = 3.0V -1 VCC = 3.3V -2 VCC = 3.3V -2 -3 -40 -30 -20 INPUT POWER (dBm) -10 0 10 fIN = 1.9GHz 1.8 1.6 1.4 1.2 1.0 TA = +85C 0.8 VCC = 3.6V TA = +25C TA = -40C 0.6 0.4 -3 -50 2.0 OUTPUT VOLTAGE (V) 2 fIN = 0.9GHz, TA = -40C NORMALIZED TO DATA AT +25C -70 -60 -50 -40 -30 MAX2015 toc09 3 MAX2015 toc07 fIN = 0.9GHz, TA = +85C NORMALIZED TO DATA AT +25C 10 TA = +25C INPUT POWER (dBm) 3 0 TA = +85C 1 1.4 0.4 -3 10 fIN = 0.9GHz NORMALIZED TO DATA AT +25C 0.8 VCC = 3.6V 0 1.6 0.6 -60 -50 MAX2015 toc06 fIN = 0.9GHz -2 -70 -60 3 MAX2015 toc05 MAX2015 toc04 2.0 OUTPUT VOLTAGE (V) ERROR (dB) -10 OUTPUT-VOLTAGE ERROR vs. INPUT POWER VCC = 3.3V 0 -20 OUTPUT VOLTAGE vs. INPUT POWER VCC = 3.0V -60 -30 OUTPUT-VOLTAGE ERROR vs. INPUT POWER VCC = 2.7V -70 -40 INPUT POWER (dBm) -1 ERROR (dB) -50 INPUT POWER (dBm) 1 2 -60 INPUT POWER (dBm) fIN = 0.1GHz, TA = -40C NORMALIZED TO DATA AT +25C 0 -70 MAX2015 toc08 -60 3 2 -3 -3 -70 -20 INPUT POWER (dBm) -10 0 10 -60 -50 -40 -30 -20 -10 0 10 INPUT POWER (dBm) _______________________________________________________________________________________ 5 MAX2015 Typical Operating Characteristics (MAX2015 typical application circuit (Figure 1), VS = VCC = 3.3V, PIN = -10dBm, fIN = 100MHz, R1 = 0, R4 = 0, RL = 10k, VPWDN = 0V, TA = +25C, unless otherwise noted.) Typical Operating Characteristics (continued) (MAX2015 typical application circuit (Figure 1), VS = VCC = 3.3V, PIN = -10dBm, fIN = 100MHz, R1 = 0, R4 = 0, RL = 10k, VPWDN = 0V, TA = +25C, unless otherwise noted.) OUTPUT-VOLTAGE ERROR vs. INPUT POWER 1 ERROR (dB) TA = +25C -1 TA = -40C VCC = 2.7V VCC = 3.6V 1 0 VCC = 2.7V -1 -1 VCC = 3.0V -2 -3 -40 -30 -20 -10 0 10 -3 -60 -50 -40 -20 -10 0 10 -60 -50 -40 -10 0 INPUT POWER (dBm) OUTPUT VOLTAGE vs. INPUT POWER OUTPUT-VOLTAGE ERROR vs. INPUT POWER OUTPUT-VOLTAGE ERROR vs. INPUT POWER 3 MAX2015 toc13 1.2 2 fIN = 2.5GHz NORMALIZED TO DATA AT +25C ERROR (dB) 1 1.0 TA = +85C 2 fIN = 2.5GHz, TA = +85C NORMALIZED TO DATA AT +25C 1 TA = +85C TA = +25C 0 VCC = 3.3V 0 VCC = 3.6V VCC = 2.7V -1 TA = -40C 0.6 -2 TA = +25C TA = -40C -30 -20 -10 0 VCC = 3.0V -2 -3 -40 -3 -50 -40 -30 -20 -10 0 -50 -40 -30 -20 -10 INPUT POWER (dBm) INPUT POWER (dBm) INPUT POWER (dBm) OUTPUT-VOLTAGE ERROR vs. INPUT POWER OUTPUT VOLTAGE vs. INPUT POWER OUTPUT-VOLTAGE ERROR vs. INPUT POWER VCC = 3.0V 0 VCC = 3.3V VCC = 3.6V 1.4 3 MAX2015 toc17 TA = -40C TA = +25C TA = +85C TA = +85C TA = +25C 0.8 fIN = 2.68GHz NORMALIZED TO DATA AT +25C TA = -40C 1.2 1.0 0 2 ERROR (dB) VCC = 2.7V -1 fIN = 2.68GHz OUTPUT VOLTAGE (V) fIN = 2.5GHz, TA = -40C NORMALIZED TO DATA AT +25C 1 1.6 MAX2015 toc16 3 10 3 -1 2 -20 INPUT POWER (dBm) fIN = 2.5GHz 0.4 -50 -30 INPUT POWER (dBm) 1.4 0.8 -30 ERROR (dB) -50 MAX2015 toc14 -60 VCC = 3.6V VCC = 3.3V -2 -3 VCC = 3.0V 0 MAX2015 toc15 -2 OUTPUT VOLTAGE (V) VCC = 3.3V 2 fIN = 1.9GHz, TA = -40C NORMALIZED TO DATA AT +25C MAX2015 toc18 0 fIN = 1.9GHz, TA = +85C NORMALIZED TO DATA AT +25C ERROR (dB) TA = +85C 1 ERROR (dB) 2 3 MAX2015 toc11 fIN = 1.9GHz NORMALIZED TO DATA AT +25C 2 3 MAX2015 toc10 3 OUTPUT-VOLTAGE ERROR vs. INPUT POWER MAX2015 toc12 OUTPUT-VOLTAGE ERROR vs. INPUT POWER ERROR (dB) MAX2015 0.1GHz to 3GHz, 75dB Logarithmic Detector/Controller TA = +25C 1 0 -1 TA = +85C -2 0.6 -3 0.4 -2 TA = -40C -50 -40 -30 -20 INPUT POWER (dBm) 6 -10 0 -3 -50 -40 -30 -20 INPUT POWER (dBm) -10 0 -50 -40 -30 -20 INPUT POWER (dBm) _______________________________________________________________________________________ -10 0 0.1GHz to 3GHz, 75dB Logarithmic Detector/Controller 1.0 MAGNITUDE (dB) 1.5 -12.5 RFIN (AC-COUPLED) 0.5 0 VCC = 2.7V, 3.0V -15.0 -17.5 -20.0 TA = -40C -12.5 MAGNITUDE (dB) VOUT -10.0 MAX2015 toc20 MAX2015 toc19 RF INPUT VOLTAGE, OUTPUT VOLTAGE (V) fIN = 100MHz 2.0 S11 MAGNITUDE S11 MAGNITUDE -10.0 MAX2015 toc21 RF PULSE RESPONSE 2.5 -15.0 -17.5 TA = +85C -20.0 TA = +25C -0.5 -22.5 -1.0 -25.0 VCC = 3.3V, 3.6V -25.0 0 TIME (50ns/div) -22.5 0.5 1.0 1.5 2.0 2.5 3.0 FREQUENCY (GHz) 0 0.5 1.0 1.5 2.0 2.5 3.0 FREQUENCY (GHz) Pin Description PIN 1, 4 2, 3 NAME VCC FUNCTION Supply Voltage. Bypass with capacitors as specified in the application drawing. Place capacitors as close to the pin as possible (see the Power-Supply Connections section). INHI, INLO Differential RF Inputs Power-Down Input. Drive PWDN with a logic-high to power down the IC. PWDN must be connected to GND for VS between 4.75V and 5.25V with R4 = 75. 5 PWDN 6 GND Ground. Connect to the PCB ground plane. 7 SET Set-Point Input. To operate in detector mode, connect SET to OUT. To operate in controller mode, connect a precision voltage source to control the power level of a power amplifier. 8 OUT Detector Output. In detector mode, this output provides a voltage proportional to the log of the input power. In controller mode, this output is connected to a power-control input on a power amplifier (PA). -- EP Exposed Paddle (TDFN package only). Connect EP to GND using multiple vias, or the EP can also be left unconnected. _______________________________________________________________________________________ 7 MAX2015 Typical Operating Characteristics (continued) (MAX2015 typical application circuit (Figure 1), VS = VCC = 3.3V, PIN = -10dBm, fIN = 100MHz, R1 = 0, R4 = 0, RL = 10k, VPWDN = 0V, TA = +25C, unless otherwise noted.) MAX2015 0.1GHz to 3GHz, 75dB Logarithmic Detector/Controller Detailed Description Applications Information The MAX2015 is a successive detection logarithmic amplifier designed for use in RF power measurement and AGC applications with a 0.1GHz to 3GHz frequency range from a single 2.7V to 3.6V power supply. It is pin compatible with other leading logarithmic amplifiers. The MAX2015 provides for improved performance with a high 75dB dynamic range at 100MHz, and exceptional accuracy over the extended temperature range and supply voltage range. In detector mode, the MAX2015 acts like an RSSI, which provides an output voltage proportional to the input power. This is accomplished by providing a feedback path from OUT to SET (R1 = 0; see Figure 1). By connecting SET directly to OUT, the op amp gain is set to 2V/V due to two internal 20k feedback resistors. This provides a detector slope of approximately 18mV/dB with a 0.5V to 1.8V output range. RF Input The MAX2015 differential RF input (INHI, INLO) allows for broadband signals between 100MHz and 3GHz. For single-ended signals, AC-couple INLO to ground. The RF inputs are internally biased and need to be AC-coupled using 680pF capacitors as shown in Figure 1 and Figure 2. An internal 50 resistor between INHI and INLO provides a good 50MHz to 3.0GHz match. SET Input The SET input is used for loop control when in controller mode or to set the slope of the output signal (mV/dB) when in detector mode. The internal input structure of SET is two series 20k resistors connected to ground. The center node of the resistors is fed to the negative input of the internal output op amp. Power-Supply Connections The MAX2015 requires power-supply bypass capacitors connected close to each VCC pin. At each VCC pin, connect a 0.1F capacitor (C4, C6) and a 100pF capacitor (C3, C5) with the 100pF capacitor being closest to the pin. For power-supply voltages (VS) between 2.7V and 3.6V, set R4 = 0 (see the typical applications circuits). For power-supply voltages (VS) between 4.75V and 5.25V, set R4 = 75 1% (100ppm/C max) and PWDN must be connected to GND. Power-Down Mode The MAX2015 can be powered down by driving PWDN with logic high (logic high = V CC ). In power-down mode, the supply current is reduced to a typical value of 1A. For normal operation, drive PWDN with a logic low. It is recommended when using power-down that an RF signal not be applied before the power-down signal is low. Detector (RSSI) Mode Controller Mode The MAX2015 can also be used as a detector/controller within an AGC loop. Figure 3 depicts one scenario where the MAX2015 is employed as the controller for a variable-gain PA. As shown in the figure, the MAX2015 monitors the output of the PA through a directional coupler. An internal integrator (Figure 2) compares the VS R4 1 C6 VCC C5 DETECTORS C1 RFIN 2 INHI OUT 8 20k SET 7 R1 C2 3 4 C4 20k INLO VCC GND MAX2015 PWDN 6 5 C3 Figure 1. Detector-Mode (RSSI) Typical Application Circuit Table 1. Suggested Components of Typical Applications Circuits DESIGNATION VALUE TYPE C1, C2 680pF 0603 ceramic capacitors C3, C5 100pF 0603 ceramic capacitors C4, C6 0.1F R1* 0 0603 resistor R4** 0 0603 resistor 0603 ceramic capacitors *RSSI mode only. **VS = 2.7V to 3.6V. 8 OUT _______________________________________________________________________________________ 0.1GHz to 3GHz, 75dB Logarithmic Detector/Controller MAX2015 POWER AMPLIFIER VS R4 TRANSMITTER 1 C6 COUPLER VCC GAIN-CONTROL INPUT C5 DETECTORS C1 RFIN C2 2 3 4 C4 INHI INLO VCC OUT 8 20k VOUT OUT SET 7 VSET SET-POINT DAC 20k GND MAX2015 PWDN 6 LOGARITHMIC DETECTOR IN SET 20k 5 20k C3 MAX2015 Figure 2. Controller-Mode Typical Application Circuit Figure 3. System Diagram for Automatic Gain-Control Loop detected signal with a reference voltage determined by VSET. The integrator, acting like a comparator, increases or decreases the voltage at OUT, according to how closely the detected signal level matches the VSET reference. The MAX2015 adjusts the power of the PA to a level determined by the voltage applied to SET. With R1 = 0, the controller mode slope is approximately 19mV/dB (RF = 100MHz). As with any RF circuit, the layout of the MAX2015 circuit affects the device's performance. Use an abundant number of ground vias to minimize RF coupling. Place the input capacitors (C1, C2) and the bypass capacitors (C3-C6) as close to the IC as possible. Connect the bypass capacitors to the ground plane with multiple vias. Layout Considerations _______________________________________________________________________________________ 9 MAX2015 0.1GHz to 3GHz, 75dB Logarithmic Detector/Controller Ordering Information (continued) TEMP RANGE PINPACKAGE PKG CODE MAX2015EUA+ -40C to +85C 8 MAX U8-1 MAX2015EUA+T -40C to +85C 8 MAX U8-1 MAX2015ETA -40C to +85C 8 TDFN-EP* (3mm x 3mm) T833-2 MAX2015ETA-T -40C to +85C 8 TDFN-EP* (3mm x 3mm) T833-2 MAX2015ETA+ -40C to +85C 8 TDFN-EP* (3mm x 3mm) T833-2 PART MAX2015ETA+T -40C to +85C 8 TDFN-EP* (3mm x 3mm) Pin Configuration TOP VIEW VCC 1 8 INHI 2 7 SET INLO 3 6 GND VCC 4 5 PWDN MAX2015 OUT MAX TOP VIEW OUT SET 8 7 GND PWDN 6 5 T833-2 T = Tape-and-reel. +Denotes lead-free and RoHS compliance. *EP = Exposed paddle. MAX2015 1 2 3 4 VCC INHI INLO VCC TDFN Chip Information TRANSISTOR COUNT: 3157 PROCESS: BiCMOS 10 ______________________________________________________________________________________ 0.1GHz to 3GHz, 75dB Logarithmic Detector/Controller 8 INCHES DIM A A1 A2 b E O0.500.1 H c D e E H 0.60.1 L 1 1 0.60.1 S BOTTOM VIEW D MIN 0.002 0.030 MAX 0.043 0.006 0.037 0.014 0.010 0.007 0.005 0.120 0.116 0.0256 BSC 0.120 0.116 0.198 0.188 0.026 0.016 6 0 0.0207 BSC 8LUMAXD.EPS 4X S 8 MILLIMETERS MAX MIN 0.05 0.75 1.10 0.15 0.95 0.25 0.36 0.13 0.18 2.95 3.05 0.65 BSC 2.95 3.05 4.78 5.03 0.41 0.66 0 6 0.5250 BSC TOP VIEW A1 A2 A c e b FRONT VIEW L SIDE VIEW PROPRIETARY INFORMATION TITLE: PACKAGE OUTLINE, 8L uMAX/uSOP APPROVAL DOCUMENT CONTROL NO. 21-0036 REV. 1 J ______________________________________________________________________________________ 1 11 MAX2015 Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.) 6, 8, &10L, DFN THIN.EPS MAX2015 0.1GHz to 3GHz, 75dB Logarithmic Detector/Controller PACKAGE OUTLINE, 6,8,10 & 14L, TDFN, EXPOSED PAD, 3x3x0.80 mm 21-0137 12 ______________________________________________________________________________________ H 1 2 0.1GHz to 3GHz, 75dB Logarithmic Detector/Controller PACKAGE VARIATIONS COMMON DIMENSIONS SYMBOL MIN. MAX. PKG. CODE N D2 E2 e JEDEC SPEC b A 0.70 0.80 T633-1 6 1.500.10 2.300.10 0.95 BSC MO229 / WEEA 0.400.05 1.90 REF D 2.90 3.10 T633-2 6 1.500.10 2.300.10 0.95 BSC MO229 / WEEA 0.400.05 1.90 REF [(N/2)-1] x e E 2.90 3.10 T833-1 8 1.500.10 2.300.10 0.65 BSC MO229 / WEEC 0.300.05 1.95 REF A1 0.00 0.05 T833-2 8 1.500.10 2.300.10 0.65 BSC MO229 / WEEC 0.300.05 1.95 REF L 0.20 0.40 T833-3 8 1.500.10 2.300.10 0.65 BSC MO229 / WEEC 0.300.05 1.95 REF T1033-1 10 1.500.10 2.300.10 0.50 BSC MO229 / WEED-3 0.250.05 2.00 REF k 0.25 MIN. A2 0.20 REF. T1033-2 10 1.500.10 2.300.10 0.50 BSC MO229 / WEED-3 0.250.05 2.00 REF T1433-1 14 1.700.10 2.300.10 0.40 BSC ---- 0.200.05 2.40 REF T1433-2 14 1.700.10 2.300.10 0.40 BSC ---- 0.200.05 2.40 REF PACKAGE OUTLINE, 6,8,10 & 14L, TDFN, EXPOSED PAD, 3x3x0.80 mm 21-0137 -DRAWING NOT TO SCALE- H 2 2 Revision History Pages changed at Rev 2: 1-10, 12, 13 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 13 (c) 2007 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc. MAX2015 Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.)