2841/7-SL001 - ALPHA - Datasheet.Directory

Power entry modules without line filter DG11

https://www.schurter.com /PG05

Connectors

IEC Appliance Inlet C14 or C18 with Circuit Breaker TA35 2-pole

Screw-on with IP67 and TA35 in white with black

printed symbols

Screw-on with IP67 Snap-in IP40 with TA35 red illuminated and em-

bossed symbols

See below:

Approvals and Compliances

C14

70° C

C18

70° C

Description

- Panel mount :

Screw-on version from front or rear side, snap-in version from front

side

- 2 Functions :

Appliance Inlet , protection class I or II , Circuit breaker type TA35

, 2-pole

- Pre-wired coupling

- V-Lock notch standard

- Quick connect terminal 6.3 x 0.8 mm

Unique Selling Proposition

- Variant tested for IP67 into the appliance

- Various mounting options

- Recessed rocker prevents accidental manipulation

- Compatible with V-Lock cord retention

Characteristics

- Connector and circuit breaker are prewired

- Circuit Breaker non-illuminated or illuminated

- Suitable for use in equipment according to IEC/UL 60950

Other versions on request

- Version without pre-wiring from inlet to circuit breaker

- Protection class II, 70°C

- Variants in white

References

Substitute for type 6135

Component: circuit breakers TA35 Rocker 2Pole

Weblinks

pdf data sheet, html datasheet, General Product Information, Distributor-

Stock-Check, Accessories, Detailed request for product, Landing Page

Technical Data

Ratings IEC 10 A / 250 VAC; 50 Hz

Ratings UL/CSA 15 A / 250 VAC; 60 Hz

Dielectric Strength > 2.5 kVAC between L-N

> 3 kVAC between L/N-PE

(1 min/50 Hz)

Allowable Operation Tempe-

rature

-25 °C to 60 °C

IP-Protection from front side IP40 or IP67 acc. to IEC

60529

Insulation cover Suitable for appliances with protection

class I or II acc. to IEC 61140

Terminal Quick connect terminals 6.3 x 0.8 mm

Panel Thickness S Screw: max 8 mm

Recommended torque min 0.25 Nm

Snap-in : S =1/1.2/1.5/2/2.5/3 mm

Material: Housing Thermoplastic, black, UL 94V-0

appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1

UL 60320-1, CSA C22.2 no. 60320-1

(for cold conditions) pin-temperature 70

°C, 10 A, Protection Class I or II

Circuit Breakers Acc. IEC/EN 60934, UL 1077, CSA

22.2 no. 235

2-pole rocker switch, illuminated or non-

illuminated.

Conditional short circuit Inc:

2000 A

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

SCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national

and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF

16949, medical technology according to ISO 13485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-

ments by SCHURTER.

Power entry modules without line filter

DG11 https://www.schurter.com /PG05

Connectors

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: DG11

Approval Logo Certificates Certification Body Description

VDE Approvals VDE Certificate Number: 40048151

UL Approvals UL UL File Number: E96454

CCC Approvals CCC CCC Certificate Number: pending

Product standards

Product standards that are referenced

Organization Design Standard Description

Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes

Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles

Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices

Application standards

Application standards where the product can be used

Organization Design Standard Description

Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information

technology equipment.

Compliances

The product complies with following Guide Lines

Identification Details Initiator Description

CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable

requirements laid down in the harmonisation of Community legislation on

its affixing in accordance with EU Regulation 765/2008.

RoHS SCHURTER AG Directive RoHS 2011/65/EU, Amendment (EU) 2015/836

China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March

2007. It is similar to the EU directive RoHS.

REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,

Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as

"REACH") entered into force.

SCHURTER AG V-Lock system are based on a matching plug-dose combination. The

connector is equipped with a notch intended for use with the latching

cordset. The cord latching system prevents against accidental removal of

the cordset.

Dimensions [mm]

Snap-in mounting for front mount IP40

R1.5

(51.6)

48.3

32.45 3.3

1622.1

5.35

5.65

max. R3

30 ±0.10

59 +0.20

+0.10

S = Panel thickness

Power entry modules without line filter DG11

https://www.schurter.com /PG05

Connectors

Screw-on mounting version A for front mount IP40

R1.5

32.45

1.2

ø 3.4

ø 6.2

3.348.3

(51.6)

1622.1

5.65

5.35

30 ±0.10

66 ±0.10

59 +0.20

ø 3.4/M3

max. R3

Screw-on mounting Version A for rear mount IP40

ø 3.4

R1.5

50.1

(51.6)

34.25

1.8

1.5

5.65

5.35

22.1

ø 3.4/M3

66 ±0.10

57.2 ±0.10

max. R1

29.2 ±0.10

Screw-on mounting Version B for front mount IP40

5.65

5.35

22.1 16

1.2

ø 6.2

(51.6)

48.3

32.45 3.3

R1.5

ø 3.4 / M3

38 ±0.10

30 ±0.10

59 +0.20

max. R3

Power entry modules without line filter

DG11 https://www.schurter.com /PG05

Connectors

Screw-on mounting version B for rear mount IP40

R1.5

ø 3.4

50.1

(51.6)

1.8

1.5

34.25

5.65

5.35

22.1

38 ±0.10

29.2 ±0.10

ø 3.4 / M3

max. R1

57.2 ±0.10

Screw-on mounting for front mount IP67

22.1

5.65

5.35

3.332.45

(53.6)

50.3 34.3 ±0.10

42 ±0.10

ø 3.4/M3

max. R3

38±0.10

59+0.20

Diagrams

PE PE'

L' P

N' P2

1) 2)

TA35

1) Line

2) Load

Effect of ambient temperature

The units are calibrated for an ambient temperature of +23°C. To determine the rated cur-

rent for a lower or higher ambient temperature, use a correction factor (typical value) from

the table below:

Ambient Temperature [°C] Correction factor

-30 0.76

-20 0.81

0 0.90

+23 1.00

+40 1.03

+50 1.04

+60 1.06

Example: Rated current = 5 A, Environmental temperature = 50 °C --> Correction factor =

1.04, Resulting current = 5.2 A --> Fount to next higher rated current: 6 A

Power entry modules without line filter DG11

https://www.schurter.com /PG05

Connectors

Time-Current-Curves

Tripping Characteristics In < 3 A

Time in Seconds

TyppTA35

Nennstrom<3 A (TC-1,TC-2)

Umgebungstemp. +23 °C

1,05 10854321,35

10'000

2`000

1`000

500

200

100

[ sec ][ min ]

0,5

0,3

0,2

0,1

Multiple of Rated Current In

Reference Temperature +23°

Tripping Characteristics In ≥ 3 ... ≤ 15 A

Time in Seconds

1,05 10854321,35

10'000

2`000

1`000

500

200

100

[ sec [ min ]

0,5

0,3

0,2

0,1

]

> 3–15A (TC-1, TC-2)

TypTA35

Nennstrom

Umgebungs-

temp. +23 °C

Multiple of Rated Current In

Reference Temperature +23°

Power entry modules without line filter

DG11 https://www.schurter.com /PG05

Connectors

Rated current In (A)

Other rated currents on request

In Code

1,0 J10

2,0 J20

4,0 040

5,0 050

6,0 060

In Code

8,0 080

10,0 100

12,0 120*

15,0 150*

F120 C0

No other

features

F embossed

H printed white

K printed black

L printed white

M printed black

Surface Illustration Colour of print

Rocker legend

OFF

Other legends on request

Colours

Switch front Rocker

non-illuminated illuminated

W black white –

B black black –

3 black – red transparent

4 black – green transparent

6 black – orange transparent

Other colours on request

CBD W

TA35-

ORDER CODE

Switch without CBT CBD

illumination

Switch illuminated 240 V C12 C32

120 V C14 C34

Other versions on request

Table 1 Selection for type TA35

Order example

LINE

LOAD

LINE

LOAD

Number of switched poles 2-pole

Number of protected poles 1 2

*) UL / CSA only

Position of the rocker

legend e.g. I / O

Power entry modules without line filter DG11

https://www.schurter.com /PG05

Connectors

Typ Con guration Code

(Example) TA35

DG11 C B D W F 1 2 0 C 0 -000- C6135-XXX - XXX -00

see table 1

Con guration Code

Please note that Schurter will establish an

internal part number for logistics use in

addition to the order code. The format of this

internal part number is, for example:

3-XXX-XXX

Panel Mounting 1)

00 Screw version A front mounting

01 Screw version B front mounting

02 Screw version A rear mounting

03 Screw version B rear mounting

10 Snap-in 1.0 mm

12 Snap-in 1.2 mm

15 Snap-in 1.5 mm

20 Snap-in 2.0 mm

25 Snap-in 2.5 mm

30 Snap-in 3.0 mm

88 Screw version front mounting

(sealed towards housing, IP67)

Color

0 Black

Screw version A Screw version B

Terminal PE

0 Without (PCII)

1 QC 6.3x0.8 mm

Terminal L

1 QC 6.3x0.8 mm (unwired)

3 Connection to TA35 (wired)

Terminal N

1 QC 6.3x0.8 mm (unwired)

3 Connection to TA35 (wired)

All Variants

Config. Code Order Number

DG11-C126F100C0-000-C6135-331-200-00 3-107-924 █

DG11-CBDWM100C0-000-C6135-331-880-00 3-108-454 █

DG11-CBDBL100C0-000-C6135-331-010-00 3-108-463 █

DG11-CBDWM100C0-000-C6135-331-150-00 3-109-713 █

DG11-CBDWM100C0-000-C6135-331-010-00 3-109-714 █

DG11-CBDWM100C0-000-C6135-331-020-00 3-109-715 █

DG11-CBDWM150C0-000-C6135-331-150-00 3-109-716 █

DG11-CBDWM150C0-000-C6135-331-010-00 3-109-717 █

DG11-CBDWM150C0-000-C6135-331-020-00 3-109-718 █

DG11-CBDWM150C0-000-C6135-331-880-00 3-109-719 █

█ Most Popular.

Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER

More information in the HTML data sheet on the variant table

Packaging unit 10 Pcs

The specifications, descriptions and illustrations indicated in this document are based on current

information. All content is subject to modifications and amendments. Information furnished is believed

to be accurate and reliable. However, users should independently evaluate the suitability and test each

product selected for their own applications.

30.05.2019