LTL1CHKxKNN 45 degree Features ! ! ! ! ! ! T-1(3mm) General Purpose LED Lamps. Low power consumption. High efficiency . Water Clear Lens Options. High luminous intensity output. I.C. Compatible/low current requirment. Description This family 3mm LED lamps are standard designed for applications requiring higher intensity level. The source color devices are made with Aluminum Indium Gallium Phosphide(AlInGaP) on Gallium Arsenide light emitting diode. Application ! General Purpose. ! Indicator Lights. Devices Part No. Lens Source Color LTL1CHKDKNN Water Clear AlInGap Hyper Red LTL1CHKRKNN Water Clear AlInGap Super Red LTL1CHKEKNN Water Clear AlInGap Red LTL1CHKFKNN Water Clear AlInGap Yellow Orange LTL1CHKYKNN Water Clear AlInGap Amber Yellow LTL1CHKSKNN Water Clear AlInGap Yellow LTL1CHKGKNN Water Clear AlInGap Green ! ""#$%&!$&!$&%$""$%!'$&()!* +"&($!,+%%', ,-*.&"!!)/$!&# .##!$&.&#"&$! ,%%', -*% #!0($&$!%!.#/))"#!%%)0(1 0($$($&!!.23(()&/$).&$( + Absolute Maximum Ratings at TA=25C Hyper Red Super Red Red Yellow Orange Amber Yellow Yellow Green Unit 75 75 75 75 75 75 75 mW 90 90 90 60 60 60 60 mA Continuous Forward Current 30 30 30 30 30 30 30 mA Derating Linear From 70C 0.4 0.4 0.4 0.4 0.4 0.4 0.4 mA / C 5 5 5 5 5 5 5 V Parameter Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Reverse Voltage(IR =100 A) Operating Temperature Range -40C to + 100C Storage Temperature Range -55C to + 100C Lead Soldering Temperature 260 for 5 Seconds [1.6mm(.063") From Body] Electrical / Optical Characteristics at TA=25 Parameter Luminous Symbol Iv Intensity Viewing Angle Peak Emission P d Wavelength Spectral Line Min. Typ. 1CHKDKNN 1CHKRKNN 1CHKEKNN 1CHKFKNN 1CHKYKNN 1CHKSKNN 1CHKGKNN 140 140 140 140 140 140 140 210 250 320 320 320 320 320 mcd 45 deg 2 1/2 Wavelength Dominant Part No. (LTL) Half-Width Forward Voltage VF Reverse Current IR Capacitance C 1CHKDKNN 1CHKRKNN 1CHKEKNN 1CHKFKNN 1CHKYKNN 1CHKSKNN 1CHKGKNN 1CHKDKNN 1CHKRKNN 1CHKEKNN 1CHKFKNN 1CHKYKNN 1CHKSKNN 1CHKGKNN 1CHKDKNN 1CHKRKNN 1CHKEKNN 1CHKFKNN 1CHKYKNN 1CHKSKNN 1CHKGKNN 1CHKDKNN 1CHKRKNN 1CHKEKNN 1CHKFKNN 1CHKYKNN 1CHKSKNN 1CHKGKNN 650 639 632 611 595 588 575 639 632 624 605 592 587 572 20 20 20 17 15 15 15 2.0 2.0 2.05 2.05 2.05 2.05 2.05 40 Max. Unit Test Condition IF = 20mA Note 1 Note 2 nm Note 3 (Fig.5) Measurement @ peak (Fig.1) nm Note 5 nm 2.4 2.3 2.4 2.4 2.4 2.4 2.4 V IF = 20mA 100 A VR = 5V pF VF = 0, f = 1 MHz NOTES: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. Luminous intensity rank classified products support two ranks. 3. 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 4. Iv classification code is marked on each packing bag. 5. The dominant wavelength, d is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Typical Electrical / Optical Characteristics Curves (25 Ambient Temperature Unless Otherwise Noted)