Installation Instructions for the 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers GENERAL INFORMATION Potentiometers convert rotary motion into a change of resistance, supplying a smooth transition of voltage or current levels. The resulting voltage output may be used to control position transducers in a wide variety of potential applications. The 392 Series and RV6 Series 0.5 W Plastic Potentiometers are economical devices designed to meet wave soldering process requirements for mounting to printed circuit boards (PCBs). All versions contain an internal shaft seal for moisture protection and comply with PCB washability test requirements and MIL-R-94 standards where appropriate. Termination types are PC pin or solder hook, both are solder-dipped. Issue A 50099566 plastic/plastic or a combination of the two. Custom designs are available upon request. The 392 Series and RV6 Series are available in resistances from 100 Ohm to 5 MOhm, inclusive. Tapers include linear, log, and antilog to meet a wide range of application requirements. RV6 Series devices meet requirements of MIL-R-94. TABLE OF CONTENTS General Specifications . . . . . . . . front cover-5 392 Series: Specific Configurations . . . . . . . . . . . . . . 6-8 Order Guides. . . . . . . . . . . . . . . . . . . . . 9-19 These small, single turn devices have a 3,18 mm [0.125 in] diameter shaft that is available in a range of lengths. Most configurations have either a standard or split locking 1/4-32 NEF-2A bushing in panel seal or no panel seal versions. The shaft/bushing materials are nickelplated brass or thermoplastic. They are available in metal/metal, RV6 Series: Specific Configurations . . . . . . . . . . . . . . 20 Order Guides . . . . . . . . . . . . . . . . . . . . 21-25 Mounting Hardware. . . . . . . . . . . . . back page Table 1. Electrical Specifications Parameter Characteristic 392 Series RV6 Series Maximum working voltage Dielectric strength Power rating Taper CRV1: linear tapers log, reverse log tapers Resistance: linear tapers log, reverse log tapers Resistance tolerance: linear tapers: 100 Ohm to 1 MOhm >1 MOhm log, reverse log tapers: 500 Ohm to 250 kOhm >250 kOhm End resistance Linearity Electrical rotation: nominal effective 350 Vdc max. 750 Vac for 60 s at 1 mPa [atm], 350 Vac for 60 s at 11,5 kPa [3.4 inHg] 0.5 W at 70 C [158 F], derated to 120 C [248 F] 0.25 W linear (S), linear (special), log (Z), reverse log (RZ) linear (S), log (Z) 1.5% max. of total resistance 100 Ohm to 5 MOhm 500 Ohm to 2 MOhm 100 Ohm to 1 MOhm 500 Ohm to 1 MOhm 10% 20% 10% 20% 4 Ohm max. at each end of rotation 5% independent 265 (+0/-10) 295 (5) Contact resistance variation is the maximum momentary change in contact resistance that occurs when the wiper is moved from one location to another location. The larger this change, the more difficult it is to set the trimmer potentiometer and the more unstable the long term setting will be. 1 Sensing and Control 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers ISSUE A 50099566 Table 2. Mechanical Specifications Characteristic Shaft: diameter material: metal plastic Bushing: diameter/thread size material: metal plastic Termination base material Termination types: solder hook material PC pin: PCB fit material Cover material Parameter 392 Series 3,18 mm [0.125 in] nickel-plated brass thermoplastic 1/4-32 NEF-2A nickel-plated brass thermoplastic thermoset plastic brass, solder (tin-lead) dip finish (ffits2,54 mm [0.100 in] grid spacing, 0,86 mm [0.034 in] holes brass, solder (SAC305) dip finish stainless steel Housing material thermoplastic Base material Mounting hardware material: jam nut mounting nut lock washer panel O-ring Sealant Rotational torque RV6 Series thermoset nickel-plated brass nickel-plated brass nickel-plated phospher bronze Buna-N epoxy 3.5 mN m to 14 mN m [0.5 in-oz to 2.0 in-oz] Stop torque Weight (approx.): metal shaft and metal bushing plastic shaft and plastic bushing 34 N m [3 in-lb] 7,09 g [0.25 oz] 2,84 g [0.1 oz] Table 3. Environmental Specifications Characteristic 392 Series RV6 Series Operating temperature -55 C to 120 C [-67 F to 248 F] Base material -40 C to 120 C [-40 F to 248 F] Rotational life tested to 50,000 cycles Soldering 2 Parameter Honeywell Sensing and Control -- MIL-R-94 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers ISSUE A 50099566 Table 4. Maximum Percent Temporary Resistance from 25 C [77 F] Temperature Nominal Resistance -55 C [-67 F] -40 C [-40 F] 0 C [32 F] 25 C [77 F] 55 C [131 F] 85 C [185 F] 120 C [248 F] 100 Ohm 5.0 4.0 1.5 0 1.5 2.0 3.5 10 kOhm +7.0 +5.5 +2.0 0 1.5 2.5 5.5 100 kOhm +8.0 +6.0 +2.5 0 2.0 3.5 6.0 1 MOhm +10.0 +8.0 +3.0 0 2.5 4.0 7.5 Figure 1. Power Derating Curve 100 90 80 Rated Power (%) 70 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 Temperature (C) 90 100 110 120 Honeywell Sensing and Control 3 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers ISSUE A 50099566 Figure 2. Recommended Wave Solder and Board Wash Parameters Blow dry Wave solder Fluxing Wash and rinse Preheat 345 Bake dry 305 Temperature (F) 265 225 185 145 105 65 0 1 3 4 5 Time (Minutes) 6 7 8 Process Limits Temperature Time Preheat, max. 91 C [195 F] 1 min. Solder, max. 288 C [550 F] -- 22 F [72 F] -- Wash 66 C to 71 C [150 F to 160 F] 1.5 min. Dry 47 C to 104 C [116 F to 220 F] 2 min. Differential after solder in wash (3/4T), max. 4 2 Honeywell Sensing and Control 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers ISSUE A 50099566 Figure 3. Electrical Taper Diagrams (For reference only.) Linear (S) The change in resistance is directly proportional to the degree of rotation (right-hand or left-hand). Linear (Special) Attains 50% resistance value at 50% of clockwise rotation (left-hand). 90 90 80 80 Total Resistance (%) 100 Total Resistance (%) 100 70 60 50 40 30 70 60 50 40 30 20 20 10 10 0 0 0 10 20 30 40 50 60 70 80 90 100 Angular Rotation, Clockwise Left to Right (%) Log (Z) Attains 10% resistance value at 50% of clockwise rotation (left-hand). 90 80 80 Total Resistance (%) 90 Total Resistance (%) 100 60 50 40 30 70 60 50 40 30 20 20 10 10 0 0 10 20 30 40 50 60 70 80 90 100 Angular Rotation, Clockwise Left to Right (%) 10 20 30 40 50 60 70 80 90 100 Angular Rotation, Clockwise Left to Right (%) Reverse Log (RZ) Attains 10% resistance value at 50% of clockwise rotation (right-hand). 100 70 0 0 0 10 20 30 40 50 60 70 80 90 100 Angular Rotation, Clockwise Left to Right (%) Figure 4. Functional Schematic C (Center) CW (Clock-Wise) L (Left) R (Right) Honeywell Sensing and Control 5 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers ISSUE A 50099566 Table 5. 392 Series Metal Shaft and Metal Bushing Specific Configurations Shaft Type Bushing AR Type Pin Termination 392-A (See Table 392-A on p. 9.) panel 1 seal, flatted standard, and 6,35 mm 2 [0.25 in] solder hook 392-C (See Table 392-C on p. 10.) flatted no panel seal, 1 split, and locking, 2 12,7 mm [0.50 in] PC pin 392-E (See Table 392-E on p. 11.) no panel seal, flatted standard, 6,35 mm [0.25 in] 0 PC pin 392-G (See Table 392-G on p. 12.) no panel seal, flatted standard, 6,35 mm [0.25 in] 1 solder hook Configuration with Associated Hardware Shaft Type Bushing AR Type Pin Termination 392-B (See Table 392-B on p. 9.) round no panel 1 seal, standard, and 6,35 mm 2 [0.25 in] solder hook 392-D (See Table 392-D on p. 10.) no panel seal, slotted standard, 6,35 mm [0.25 in] 1 PC pin 392-F (See Table 392-F on p 11.) no panel seal, slotted standard, 6,35 mm [0.25 in] 1 PC pin 392-H (See Table 392-H on p.12.) no panel seal, slotted standard, 6,35 mm [0.25 in] 1 solder hook 392-I (See Table 392-I on p. 13.) 392-J (See Table 392-J on p. 13.) no panel 1 seal, flatted, standard, and 6,35 mm 2 [0.25 in] no panel seal, slotted standard, 6,35 mm [0.25 in] 6 PC pin Honeywell Sensing and Control 0 solder hook Configuration with Associated Hardware 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers ISSUE A 50099566 Table 5. 392 Series Metal Shaft and Metal Bushing Specific Configurations (continued) Shaft Type Bushing AR Type Pin Termination Configuration with Associated Hardware Shaft Type Bushing AR Type Pin Termination 392-K (See Table 392-K on p. 14.) 392-L (See Table 392-L on p. 15.) no panel 1 seal, slotted standard, and 6,35 mm 2 [0.25 in] no panel seal, slotted standard, 6,35 mm [0.25 in] PC pin 392-M (See Table 392-M on p. 15.) slotted no panel 1 seal, and un2 threaded PC pin 0 solder hook 392-N (See Table 392-N on p. 16.) no panel 1 seal, slotted standard, and 6,35 mm 2 [0.25 in] PC pin 392-O (See Table 392-O on p. 16.) 392-P (See Table 392-P on p. 17.) no panel 1 seal, slotted standard, and 6,35 mm 2 [0.25 in] no panel 1 seal, slotted standard, and 6,35 mm 2 [0.25 in] solder hook Configuration with Associated Hardware PC pin Honeywell Sensing and Control 7 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers ISSUE A 50099566 Table 5. 392 Series Plastic Shaft and Plastic Bushing Specific Configurations Shaft Type Bushing AR Type Pin Termination 392-Q (See Table 392-Q on p. 17.) slotted no panel seal, standard, 6,35 mm [0.25 in] 2 8 trimmer, standard 0 Shaft Type Bushing AR TerminType Pin ation 392-R (See Table 392-R on p 18.) solder hook 392-S (See Table 392-S on p. 19.) slotted Configuration with Associated Hardware PC pin Honeywell Sensing and Control no panel seal, slotted standard, 6,35 mm [0.25 in] 0 PC pin Configuration with Associated Hardware 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers ISSUE A 50099566 Table 392-A Order Guide Electrical Catalog Listing Dimensions Resistance Resistance Tolerance Taper (Ohm) (%) 392074M8792 10 k 10 S B Flat Width (mm [in]) 2,39 [0.094] A Flat Length (mm [in]) 4,78 [0.188] C Shaft Length (mm [in]) 12,70 [0.500] D Bushing Length (mm [in]) 6,35 [0.250] RoHS Compliant Mounting Hardware yes unassembled Dimensional Drawing (For reference only: mm [in].) 3,97 Typ. [0.156] 2 Center 1,57 [0.062] 5,08 [0.200] 3 Right 16,66 Max. [0.656] 0,91 Max. [0.036] 11,51 [0.453] C Shown with 50% shaft rotation D o13,08 A [0.515] 2,03 Typ. [0.080] B 6,46 [0.254] 3X 2,24 Typ. [0.088] o3,18 45 [0.125] 1 Left Locating pin 1 1/4-32 NEF-2A 5,08 [0.200] Mounting surface 2X 0,64 [0.025] 90 Locating pin 2 Table 392-B Order Guide Electrical Catalog Listing Resistance (Ohm) 392063M9270 10 k Dimensions Resistance Tolerance (%) Taper A Shaft Length (mm [in]) B Bushing Length (mm [in]) 10 S 15,09 [0.594] 6,35 [0.250] RoHS Compliant Mounting Hardware yes unassembled Dimensional Drawing (For reference only: mm [in].) 2 Center 1,57 [0.062] 3,97 Typ. [0.156] 16,66 Max. [0.656] 0,89 Max. [0.035] 11,51 [0.453] A Shown with 50% shaft rotation o13,08 [0.515] B 2,03 Typ. [0.080] 3X 2,24 Typ. [0.088] 6,46 [0.254] 5,08 [0.200] 3 Right o3,17 1 Left 5,08 [0.200] 1/4-32 NEF-2A 2X 0,89 [0.035] Mounting surface [0.125] Locating pin 1 45 Locating pin 2 Honeywell Sensing and Control 9 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers ISSUE A 50099566 Table 392-C Order Guide Electrical Catalog Listing 392050M7461 Dimensions Resistance Resistance Tolerance Taper (Ohm) (%) 2.5 M 10 S E D C B A RoHS Mounting Bushing Termination Compliant Hardware Shaft Flat Flat Length Length Length Width Length (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) 5,16 2,39 18,26 12,70 14,30 unassemyes [0.203] [0.094] [0.719] [0.500] [0.563] bled Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] 1,57 [0.062] 2 Center C 0,89 Max. [0.035] 11,91 Max. [0.469] E Shown with 50% shaft rotation o13,08 D [0.515] A B 5,08 [0.200] 3 Right 5,08 [0.200] 1 Left o3,18 [0.125] 2,03 Typ. [0.080] Locating pin 1 1/4-32 NEF-2A 3X o0,71 [0.028] 1,02 [0.040] 45 90 Mounting surface 2X 0,89 [0.035] Locating pin 2 Table 392-D Order Guide Electrical Catalog Listing 392050M8789 Dimensions Resistance (Ohm) Resistance Tolerance (%) 10 k 10 E D C B A RoHS Mounting Bushing Termination Compliant Hardware Shaft Slot Slot Taper Length Length Length Width Depth (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) 0,79 0,79 12,70 6,35 14,30 unassemRZ yes [0.031] [0.031] [0.500] [0.250] [0.563] bled Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] E 2 Center Shown with 50% shaft rotation C 0,89 Max. [0.035] 11,91 Max. [0.469] o13,08 A D 1,57 [0.062] o3,18 [0.515] B 2,03 Typ. [0.080] [0.125] 6,46 [0.254] 5,08 [0.200] 3 Right 10 5,08 [0.200] 1 Left 3X o0,71 [0.028] Honeywell Sensing and Control 1/4-32 NEF-2A 0,89 [0.035] Mounting surface Locating pin 1 45 90 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers 50099566 ISSUE A Table 392-E Order Guide Electrical Catalog Listing 392050M9605 Dimensions Resistance Tolerance (%) Resistance (Ohm) 2.5 k 10 E D C B A RoHS Mounting Bushing Termination Compliant Hardware Shaft Flat Flat Taper Length Length Length Width Length (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) 7,14 2,36 14,27 4,75 14,30 unassemS yes [0.281] [0.093] [0.562] [0.187] [0.563] bled Dimensional Drawing (For reference only: mm [in].) 2 Center 26,59 [1.047] 1,57 [0.062] C 0,89 Max. [0.035] 11,91 Max. [0.469] E Shown with 50% shaft rotation o13,08 A D [0.515] 5,08 [0.200] 3 Right 5,08 [0.200] 2,03 Typ. [0.080] B 6,46 [0.254] 1 Left o3,18 [0.125] 3X o0,71 [0.028] 45 1/4-32 NEF-2A 90 Mounting surface Table 392-F Order Guide Electrical Catalog Listing Resistance (Ohm) 392050234617001 Dimensions E D C B A RoHS Mounting Bushing Termination Compliant Hardware Shaft Slot Slot Length Length Length Width Depth (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) 0,79 0,79 12,70 6,35 14,30 unassemno [0.031] [0.031] [0.500] [0.250] [0.563] bled Resistance Tolerance Taper (%) 10 k 10 RZ Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] 2 Center 1,57 [0.062] E Shown with 50% shaft rotation C 0,89 Max. [0.035] 11,91 Max. [0.469] o13,08 [0.515] A D o3,18 B 2,03 Typ. [0.080] [0.125] 6,46 [0.254] 5,08 [0.200] 3 Right 5,08 [0.200] 1 Left 3X o0,71 [0.028] 1/4-32 NEF-2A 2X 0,89 [0.035] Locating pin 1 45 90 Mounting surface Locating pin 2 Honeywell Sensing and Control 11 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers 50099566 ISSUE A Table 392-G Order Guide Electrical Catalog Listing 15 k 10 special D Bushing Length (mm [in]) 6,35 [0.250] C Shaft Length (mm [in]) 41,28 [1.625] B Flat Width (mm [in]) 2,39 [0.094] A Flat Length (mm [in]) 6,35 [0.250] Resistance Tolerance Taper (%) Resistance (Ohm) 392063M9549 Dimensions RoHS Compliant Mounting Hardware yes unassembled Dimensional Drawings (For reference only: mm [in].) 16,66 Max. [0.656] 3,97 Typ. [0.156] 2 Center Shown with 50% shaft rotation C 2,03 Typ. [0.080] 0,89 Max. [0.035] 1,57 [0.062] 11,51 Max. [0.453] D o13,08 A [0.515] 6,46 [0.254] B 5,08 [0.200] 1 Left 3 Right o3,18 1/4-32 NEF -2A 3X 2,24 Typ. [0.088] 5,08 [0.200] Mounting surface 45 90 [0.125] Locating pin 1 0,89 [0.035] Table 392-H Order Guide Electrical Catalog Listing 392101M9437 Resistance (Ohm) 2.5 k Dimensions Resistance Tolerance Taper (%) 10 S C Shaft Length (mm [in]) 12,70 [0.500] B Slot Width (mm [in]) 0,79 [0.031] A Slot Depth (mm [in]) 0,79 [0.031] D Bushing Length (mm [in]) 6,35 [0.250] RoHS Compliant Mounting Hardware yes unassembled Dimensional Drawing (For reference only: mm [in].) 16,66 Max. [0.656] 3,97 Typ. [0.156] 2 Center 11,51 Max. [0.493] 1,57 [0.062] C Shown with 50% shaft rotation 0,89 Max. [0.035] o13,08 [0.515] A D 3X 2,24 Typ. [0.088] B o3,18 2,03 Typ. [0.080] [0.125] 6,46 [0.254] 5,08 [0.200] 3 Right 12 1 Left 5,08 [0.200] Honeywell Sensing and Control 1/4-32 NEF-2A 2X 0,99 [0.039] Locating pin 1 45 90 Mounting surface Locating pin 2 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers 50099566 ISSUE A Table 392-I Order Guide Electrical Catalog Listing Resistance (Ohm) Resistance Tolerance (%) 392050M9173 10 k 10 392050M9514 10 k 10 Dimensions E D C B A RoHS Mounting Bushing Termination Compliant Hardware Shaft Flat Flat Taper Length Length Length Width Length (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) 11,91 2,39 19.05 6,35 14,30 unassemZ yes [0.469] [0.094] [0.750] [0.250] [0.563] bled 15,47 2,39 22,23 6,35 14,30 unassemZ yes [0.609] [0.094] [0.875] [0.250] [0.563] bled Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] 1,57 [0.062] 2 Center 11,91 Max. [0.469] 0,89 Max. [0.035] E Shown with 50% shaft rotation C o13,08 [0.515] D A 0,94 [0.037] 2,03 Typ. [0.080] B 5,08 [0.200] 3 Right 5,08 [0.200] 1 Left o3,18 [0.125] 1/4-32 NEF-2A 3X o0,71 [0.028] Locating pin 1 45 90 Mounting surface 2X 0,89 [0.035] Locating pin 2 Table 392-J Order Guide Electrical Catalog Listing Resistance (Ohm) 392063M9038 25 k Dimensions Resistance Tolerance Taper (%) 10 S B Slot Width (mm [in]) 0,79 [0.031] A Slot Depth (mm [in]) 0,79 [0.031] C Shaft Length (mm [in]) 14,68 [0.578] D Bushing Length (mm [in]) 6,35 [0.250] RoHS Mounting Compliant Hardware yes unassembled Dimensional Drawing (For reference only: mm [in].) 2 Center 1,57 [0.062] 5,08 [0.200] 3 Right 1 Left 3,97 Typ. [0.156] 16,66 Max. [0.656] 0,89 Max. [0.035] 11,51 [ 0.453] C Shown with 50% shaft rotation o13,08 [0.515] D A o3,18 3X 2,24 Typ. [0.088] B 2,03 Typ. [0.080] [0.125] 6,46 [0.254] 5,08 [0.200] 45 1/4-32 NEF-2A 90 Mounting surface Honeywell Sensing and Control 13 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers ISSUE A 50099566 Table 392-K Order Guide Electrical Catalog Listing Dimensions A B C D E RoHS Mounting Slot Slot Shaft Bushing Termination Compliant Hardware Taper Depth Width Length Length Length (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) Resistance Tolerance (%) Resistance (Ohm) 392JA2.5MEG 2.5 M 20 S 392JA250 250 10 S 392JA2500 2.5 k 10 S 392JA5MEG 5M 20 S 392JA1MEG 1M 20 S 392JA100 100 10 S 392JA100K 100 k 10 S 392JA10K 10 k 10 S 392JA1K 1k 10 S 392JA250K 250 k 10 S 392JA25K 25 k 10 S 392JA500K 500 k 10 S 392JA50K 50 k 10 S 392JA5K 5k 10 S 392050M8964 50 k 20 S 392050M9492 5k 10 S 392050M9519 50 k 20 S 392050M0016 10 k 10 S 392050M8715 2k 20 S 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 15,88 [0.625] 15,09 [0.594] 25,40 [1.00] 22,23 [0.875] 15,88 [0.625] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 9.53 [0.375] 14,30 [0.563] no unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled no unassembled yes unassembled Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] 1,57 [0.062] 2 Center E C 0.89 Max. [0.035] 11,91 Max. [0.469] Shown with 50% shaft rotation o13,08 [0.515] A D B 2,03 Typ. [0.080] 6,46 [0.254] 5,08 [0.200] 3 Right 14 5,08 [0.200] 1 Left Honeywell Sensing and Control o3,18 3X o0,71 [0.028] 1/4-32 NEF-2A 2X 0,99 [0.039] [0.125] Locating pin 1 45 90 Mounting surface Locating pin 2 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers 50099566 ISSUE A Table 392-L Order Guide Electrical Catalog Listing Resistance (Ohm) 392101M9524 100 Dimensions 10 B Slot Width (mm [in]) 0,79 [0.031] A Slot Depth (mm [in]) 0,79 [0.031] Resistance Tolerance Taper (%) S D Bushing Length mm [in] 6,35 [0.250] C Shaft Length mm [in] 15,88 [0.625] RoHS Mounting Compliant Hardware yes unassembled Dimensional Drawing (For reference only: mm [in].) 2 Center 1,57 [0.062] 5,08 [0.200] 16,66 Max. [0.656] 3,97 Typ. [0.156] 0,89 Max. [0.035] 11,51 Max. [0.453] C Shown with 50% shaft rotation o13,08 3X 2,24 Typ. [0.088] o3,17 A 2,03 Typ. [0.080] [0.125] 1 Left 3 Right [0.515] A D 6,46 [0.254] 5,08 [0.200] 45 1/4-2 NEF-2A 90 Mounting surface Table 392-M Order Guide Electrical Catalog Listing 392050M9012 Resistance (Ohm) 2k Resistance Tolerance (%) 10 Dimensions E D C B A RoHS Mounting Bushing Termination Compliant Hardware Shaft Slot Slot Taper Length Length Length Width Depth (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) 0,79 0,79 25,40 6,35 14,30 S yes unassembled [0.031] [0.031] [1.000] [0.250] [0.563] Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] E 1,57 [0.062] 2 Center C 0.89 Max. [0.035] 11,91 Max. [0.469] Shown with 50% shaft rotation o13,08 [0.515] A D B 2,03 Typ. [0.080] 6,46 [0.254] 5,08 [0.200] 3 Right 5,08 [0.200] 1 Left o3,18 45 [0.125] 3X o0,71 [0.028] Mounting surface 2X 0,89 [0.035] Locating pin 1 90 Locating pin 2 Honeywell Sensing and Control 15 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers ISSUE A 50099566 Table 392-N Order Guide Electrical Catalog Listing Resistance (Ohm) Dimensions Resistance Tolerance (%) 392050M8756 10 k 10 392050M9382 500 10 392050M9488 1M 20 E D C B A RoHS Mounting Bushing Termination Compliant Hardware Shaft Slot Slot Taper Length Length Length Width Depth (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) 0,79 0,79 22,23 6,35 14,30 Z no unassembled [0.031] [0.031] [0.875] [0.250] [0.563] 0,79 0,79 17,45 7,92 14,30 Z yes unassembled [0.031] [0.031] [0.687] [0.312 [0.563] 0,79 0,79 15,09 6,35 14,30 Z yes unassembled [0.031] [0.031] [0.594] [0.250] [0.563] Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] 1,57 [0.062] 2 Center C Shown with 50% shaft rotation 0.89 Max. [0.035] 11,91 Max. [0.469] E o13,08 [0.515] A D B 2,03 Typ. [0.080] 6,46 [0.254] 5,08 [0.200] 3 Right 5,08 [0.200] o3,17 1 Left [0.125] 1/4-32 NEF-2A 3X o0,71 [0.028] 2X 0,89 [0.035] Locating pin 1 45 90 Mounting surface Locating pin 2 Table 392-O Order Guide Electrical Catalog Listing 392063M9308 Resistance (Ohm) 10 k Dimensions A Slot Depth (mm [in]) 0,79 [0.031] Resistance Tolerance Taper (%) 10 S B Slot Width (mm [in]) 0,79 [0.031] C Shaft Length (mm [in]) 15,88 [0.625] D Bushing Length (mm [in]) 6,35 [0.250] RoHS Compliant Mounting Hardware yes unassembled Dimensional Drawing (For reference only: mm [in].) 16,66 Max. [0.656] C 2 Center 1,57 [0.062] 3,97 Max. [0.156] 11,51 Max. [0.453] 3X 2,24 Typ. [0.088] B 16 Honeywell Sensing and Control [0.515] B 2,03 Typ. [0.080] 6,46 [0.254] o3,17 [0.125] 1 Left 5,08 [0.200] o13,08 4,78 [0.188] D 5,08 [0.200] 3 Right Shown with 50% shaft rotation 3,18 [0.125] 0,89 Max. [0.035] 1/4-32 NEF-2A 2X 0,99 [0.039] Locating pin 1 45 90 Mounting surface Locating pin 2 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers ISSUE A 50099566 Table 392-P Order Guide Electrical Catalog Listing Resistance (Ohm) 392NAYSB103A Dimensions Resistance Tolerance Taper (%) 10 k 10 S E D C B A RoHS Mounting Bushing Termination Compliant Hardware Shaft Slot Slot Length Length Length Width Depth (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) 0,79 0,79 12,70 6,35 14,30 no unassembled [0.031] [0.031] [0.500] [0.250] [0.563] Dimensional Drawing (For reference only: mm [in].) 26,59 Max. [1.047] 1,57 [0.062] 2 Center 0,89 Max. [0.035] 11,91 [0.469] E Shown with 50% shaft rotation C o13,08 [0.515] A D 2,03 Typ. [0.080] o3,18 [0.125] 6,46 [0.254] 5,08 [0.200] 1 Left 3 Right 5,08 [0.200] Locating pin 1 1/4-32 NEF-2A 3X o0,71 [0.028] 2X 0,89 [0.035] Mounting surface 45 90 Locating pin 2 Table 392-Q Order Guide Electrical Catalog Listing Resistance (Ohm) 392072M6256 Dimensions 5k 10 S C Shaft Length (mm [in]) 9,53 [0.375] B Slot Width (mm [in]) 0,79 [0.031] A Slot Depth (mm [in]) 0,79 [0.031] Resistance Tolerance Taper (%) D Bushing Length (mm [in]) 6,35 [0.250] RoHS Compliant Mounting Hardware yes unassembled Dimensional Drawing (For reference only: mm [in].) 16,66 Max. [0.656] 3,97 Max. [0.156] 2 Center 11,51 Max. [0.453] 1,57 [0.062] C Shown with 50% shaft rotation 0,92 Max. [0.036] o13,08 [0.515] D A 3X 2,24 Typ. [0.088] 6,45 [0.254] 5,08 [0.200] 3 Right o3,16 [0.125] 1 Left 5,08 [0.200] B 2,03 Typ. [0.080] 1/4-32 NEF-2A 2X 0,89 [0.035] Locating pin 1 45 90 Mounting surface Locating pin 2 Honeywell Sensing and Control 17 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers 50099566 ISSUE A Table 392-R Order Guide Electrical Catalog Listing Resistance (Ohm) Dimensions Resistance Tolerance (%) A B C D E RoHS Slot Slot Shaft Bushing Termination Compliant Taper Depth Width Length Length Length (mm [in]) (mm [in]) (mm [in]) (mm [in]) (mm [in]) 392JB1MEG 1M 20 S 392JB100 100 10 S 392JB100/NEW 100 10 S 392JB100K 100 k 10 S 392JB10K 10 k 10 S 392JB1K 1k 10 S 392JB250 250 10 S 392JB2500 2.5 k 10 S 392JB250K 250 k 10 S 392JB25K 25 k 10 S 392JB500 500 10 S 392JB500K 500 k 10 S 392JB50K 50 k 10 S 392JB5K 5k 10 S 392051M9692 10 k 10 S 392051M9693 1M 20 S 392051M5761 2.5 k 10 S 392051M5803 1M 10 S 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 15,85 [0.624] 15,85 [0.624] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] Mounting Hardware yes unassembled yes unassembled no unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes unassembled yes none yes none yes none yes unassembled Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] E 1,57 [0.062] 2 Center C 0.92 Max. [0.036] 11,91 Max. [0.469] Shown with 50% shaft rotation o13,03 [0.513] A D B 2,03 Typ. [0.080] 6,44 [0.253] 5,08 [0.200] 3 Right 18 5,08 [0.200] 1 Left o3,16 3X o0,71 [0.028] Honeywell Sensing and Control 1/4-32 NEF-2A 2X 0,89 [0.035] [0.125] Locating pin 1 45 90 Mounting surface Locating pin 2 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers 50099566 ISSUE A Table 392-S Order Guide Electrical Catalog Listing Resistance (Ohm) Dimensions Resistance Tolerance (%) Taper 3925100K 100 k 10 S 392510K 10 k 10 S 3925250 250 10 S 3925500 500 10 S 3925500K 500 k 10 S 392550K 50 k 10 S 39255K 5k 10 S 392055M8814 100 k 10 S A Slot Depth (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] B Slot Width (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] C Termination Length (mm [in]) 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] 14,30 [0.563] RoHS Compliant Mounting Hardware yes none yes none yes none yes none yes none yes none yes none yes none Dimensional Drawing (For reference only: mm [in].) 26,59 [1.047] C 1,57 [0.062] 2 Center A Shown with 50% shaft rotation 0.92 Max. [0.036] 11.91 Max. [0.469] o13,03 [0.513] A See Detail A o3,16 [0.125] 6,52 [0.257] 5,08 [0.200] 3 Right 5,08 [0.200] 1 Left Detail A 3X o0,71 [0.028] Mounting surface 90 Honeywell Sensing and Control 19 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers ISSUE A 50099566 Table 7. RV6 Series Metal Shaft and Metal Bushing Specific Configurations Shaft Type Bushing AR Type Pin Termination RV6-A (See Table RV6-A on p. 21.) panel seal, 1 standard, and flatted 6,35 mm 2 [0.25 in] solder hook Configuration with Associated Hardware Shaft Type Bushing AR Type Pin Termination RV6-B (See Table RV6-B on p. 21.) flatted no panel 1 seal, standard, and solder hook 6,35 mm 2 [0.25 in RV6-C (See Table RV6-C on p. 22.) RV6-D (See Table RV6-D on p. 22.) panel seal, 1 split slotted locking, and 12,7 mm 2 [0.50 in] panel 1 seal, slotted standard, and solder hook 6,35 mm 2 [0.25 in solder hook RV6-E (See Table RV6-E on p. 23.) panel seal, 1 split slotted locking, and 12,7 mm 2 [0.50 in] solder hook RV6-G (See Table RV6-G on p. 25.) no panel seal, 1 standard, and slotted 6,35 mm 2 [0.25 in] 20 solder hook Honeywell Sensing and Control RV6-F (See Table RV6-F on pp. 24-25.) no panel seal, 1 standard, and solder hook slotted 6,35 mm 2 [0.25 in Configuration with Associated Hardware 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers ISSUE A 50099566 Table RV6-A Order Guide Electrical Catalog Listing Resistance (Ohm) RV6SAYFD502B 5k Dimensions 20 S C Shaft Length (mm [in]) 22,23 [0.875] B Flat Width (mm [in]) 2,39 [0.094] A Flat Length (mm [in]) 15,47 [0.609] Resistance Tolerance Taper (%) D Bushing Length (mm [in]) 6,35 [0.250] RoHS Compliant Mounting Hardware no unassembled Dimensional Drawing (For reference only: mm [in].) 16,66 Max. [0.656] 3,97 Typ. [0.156] 2 Center 1,57 [0.062] 0,91 Max. [0.036] 11,51 [ 0.453] 3X 2,24 Typ. [0.088] C Shown with 50% shaft rotation o13,08 A D B [0.515] 2,03 Typ. [0.080] 6,46 [0.254] 5,08 [0.200] 3 Right Locating pin 1 o3,18 1 Left 1/4-32 NEF-2A 5,08 [0.200] 2X 0,64 [0.025] [0.125] 45 90 Mounting surface Locating pin 2 Table RV6-B Order Guide Electrical Catalog Listing RV6NAYFD103A Resistance (Ohm) 10 k Dimensions 10 S C Shaft Length (mm [in]) 22,23 [0.875] B Flat Width (mm [in]) 2,39 [0.094] A Flat Length (mm [in]) 15,47 [0.609] Resistance Tolerance Taper (%) D Bushing Length (mm [in]) 6,35 [0.250] RoHS Compliant Mounting Hardware no unassembled Dimensional Drawing (For reference only: mm [in].) 3,97 Typ. [0.156] 2 Center 1,57 [0.062] 3X 2,24 Typ. [0.088] 16,66 Max. [0.656] 0,89 Max. [0.035] 11,51 [ 0.453] C Shown with 50% shaft rotation o13,08 D 2,03 Typ. [0.080] 6,46 [0.254] 5,08 [0.200] 3 Right o3,18 1 Left 5,08 [0.200] [0.515] B A 1/4-32 NEF-2A 2X 0,89 [0.035] [0.125] Locating pin 1 45 90 Mounting surface Locating pin 2 Honeywell Sensing and Control 21 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers 50099566 ISSUE A Table RV6-C Order Guide Electrical Catalog Listing Resistance (Ohm) Dimensions RV6TAYSA103A 10 k 10 S RV6TAYSA503A 50 k 10 S RV6TAYSD103A 10 k 10 S RV6TAYSD502B 5k 20 S C Shaft Length (mm [in]) 15,88 [0.625] 15,88 [0.625] 22,23 [0.875] 22,23 [0.875] B Slot Width (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] A Slot Depth (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] Resistance Tolerance Taper (%) D Bushing Length (mm [in]) 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] RoHS Compliant Mounting Hardware no unassembled no unassembled no unassembled no unassembled Dimensional Drawing (For reference only: mm [in].) 2 Center 1,57 [0.062] 16,66 Max. [0.656] 0,91 Max. [0.036] 11,51 [ 0.453] 3,97 Typ. [0.156] 3X 2,24 Typ. [0.088] Shown with 50% shaft rotation C o13,08 [0.515] D A o3,18 [0.125] 5,08 [0.200] 3 Right B 2,03 Typ. [0.080] 6,54 [0.258] 1 Left Locating pin 1 5,08 [0.200] 45 90 1/4-32 NEF-2A Mounting surface 2X 0,89 Typ. [0.035] Locating pin 2 Table RV6-D Order Guide Electrical Catalog Listing Resistance (Ohm) Dimensions Resistance Tolerance Taper (%) RV6SAYSA103A 10 k 10 S RV6SAYSA104A 100 k 10 S RV6SAYSD251A 250 k 10 S RV6SAYSD502A N/P 392 5k 10 S B Slot Width (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] A Slot Depth (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] C Shaft Length (mm [in]) 15,88 [0.625] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] D Bushing Length (mm [in]) 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] RoHS Compliant Mounting Hardware no unassembled no unassembled no unassembled no unassembled Dimensional Drawing (For reference only: mm [in].) 2 Center 1,57 [0.062] 3,97 Typ. [0.156] 3X 2,24 Typ. [0.088] 16,66 Max. [0.656] 0,91 Max. [0.036] 11,51 [ 0.453] Shown with 50% shaft rotation C o13,08 [0.125] 6,46 [0.254] 1 Left 5,08 [0.200] 1/4-32 NEF-2A 2X 0,64 [0.025] 22 B o3,18 5,08 [0.200] 3 Right [0.515] 2,03 Typ. [0.080] A D Honeywell Sensing and Control Mounting surface Locating pin 1 45 90 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers 50099566 ISSUE A Table RV6-E Order Guide Electrical Catalog Listing Resistance (Ohm) Dimensions Resistance Tolerance (%) Taper RV6LAYSA101A 100 10 S RV6LAYSA102A 1k 10 S RV6LAYSA103A 10 k 10 S RV6LAYSA104A 100 k 10 S RV6LAYSA105A 1M 10 S RV6LAYSA251A 250 10 S RV6LAYSA252A 2.5 k 10 S RV6LAYSA253A 25k 10 S RV6LAYSA501A 500 10 S RV6LAYSA502A 5k 10 S RV6LAYSA503A 50 k 20 S RV6LAYSA504A 500 k 10 S RV6LAYSA505B 5M 10 S B Flat Width (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] A Flat Length (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] C Shaft Length (mm [in]) 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 15,88 [0.625]] 15,88 [0.625] D Bushing Length (mm [in]) 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] RoHS Compliant Mounting Hardware no assembled no assembled no assembled no assembled no assembled no assembled no assembled no assembled no assembled no assembled no assembled no assembled no unassembled Dimensional Drawing (For reference only: mm [in].) 3,97 Typ. [0.156] 2 Center 3X 2,24 Typ. [0.088] 16,66 Max. [0.656] 0,89 Max. [0.035] 11,51 [0.453] Shown with 50% shaft rotation C o13,08 [0.515] A D 1,57 [0.062] o3,18 B 2,03 Typ. [0.080] [0.125] 6,46 [0.254] 5,08 [0.200] 3 Right 1/4-32 NEF-2A 1 Left 5,08 [0.200] 2X 0,89 [0.035] Locating pin 1 45 90 Mounting surface Honeywell Sensing and Control 23 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers ISSUE A 50099566 Table RV6-F Order Guide Electrical Catalog Listing Resistance (Ohm) Dimensions Resistance Tolerance Taper (%) RV6NAYSA103A 10 k 10 S RV6NAYSA502A 5k 10 S RV6NAYSA503A 50 k 10 S RV6NAYSB101A 100 10 S RV6NAYSB103A 10 k 10 S RV6NAYSB502A 5k 10 S RV6NAYSD101A 100 10 S RV6NAYSD102A 1k 10 S RV6NAYSD103A 10 k 10 S RV6NAYSD104A 100 k 10 S RV6NAYSD105A 1M 10 S RV6NAYSD251A 250 10 S RV6NAYSD252A 2.5 k 10 S RV6NAYSD253A 25 k 10 S RV6NAYSD253A 25 k 10 S RV6NAYSD253A 250 k 10 S RV6NAYSD501A 500 10 S RV6NAYSD502A 5k 10 S RV6NAYSD502B 5k 10 S RV6NAYSD503A 50 k 10 S RV6NAYSD504A 500 k 10 S A Slot Depth (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] B Slot Width (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] (Continued on next page.) 24 Honeywell Sensing and Control C Shaft Length (mm [in]) 15,88 [0.625] 15,88 [0.625] 15,88 [0.625] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 12,70 [0.500] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] D Bushing Length (mm [in]) 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] 6,25 [0.250] RoHS Compliant Mounting Hardware no unassembled no unassembled no unassembled no unassembled no unassembled no unassembled no assembled no assembled no assembled no assembled no assembled no assembled no assembled no assembled no assembled no assembled no assembled no assembled no unassembled no assembled no assembled 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers 50099566 ISSUE A Table RV6-F Order Guide (continued) Electrical Catalog Listing Resistance (Ohm) Dimensions Resistance Tolerance Taper (%) RV6NAYSL103A 10 k 10 S RV6NAYSL104A 100 k 10 S RV6LAYSL504A 500 k 10 S RV6LAYSD101AP 100 10 S D Bushing Length (mm [in]) 6,25 [0.250] 6,25 [0.250]] 6,25 [0.250] 6,25 [0.250] C Shaft Length (mm [in]) 9,53 [0.375] 9,53 [0.375] 9,53 [0.375] 22,23 [0.875] B Slot Width (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] A Slot Depth (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] RoHS Mounting Compliant Hardware no assembled no assembled no assembled no assembled Dimensional Drawing (For reference only: mm [in].) 3,97 Typ. [0.156] 2 Center 3X 2,24 Typ. [0.088] 16,66 Max. [0.656] 0,89 Max. [0.035] 11,51 [0.453] Shown with 50% shaft rotation C o13,08 [0.515] A D 1,57 [0.062] o3,18 B 2,03 Typ. [0.080] [0.125] 6,46 [0.254] 5,08 [0.200] 3 Right Locating pin 1 1/4-32 NEF-2A 1 Left 5,08 [0.200] 45 90 Mounting surface 2X 0,89 [0.035] Table RV6-G Order Guide Electrical Catalog Listing Resistance (Ohm) Dimensions Resistance Tolerance Taper (%) RV6SAYSA103C 10 k 10 Z RV6SAYSA104C 100 k 10 Z RV6SAYSD102C 1k 10 Z RV6SAYSD102D 1k 10 Z RV6SAYSD502D 5k 20 Z C Shaft Length (mm [in]) 15,88 [0.625] 15,88 [0.625] 22,23 [0.875] 22,23 [0.875] 22,23 [0.875] B Slot Width (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] A Slot Depth (mm [in]) 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] 0,79 [0.031] D Bushing Length (mm [in]) 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] 6,35 [0.250] RoHS Mounting Compliant Hardware no assembled no unassembled no unassembled no unassembled no unassembled Dimensional Drawing (For reference only: mm [in].) 3,97 Typ. [0.156] 2 Center 1,57 [0.062] 3X 2,24 Typ. [0.088] 16,66 Max. [0.656] 0,89 Max. [0.035] 11,51 [ 0.453] C Shown with 50% shaft rotation o13,08 [0.515] D A B o3,18 2,03 Typ. [0.080] [0.125] 6,46 [0.254] 5,08 [0.200] 3 Right 1 Left 5,08 [0.200] 2X 0,89 [0.035] 1/4-32 NEF-2A Mounting surface Locating pin 1 45 90 Locating pin 2 Honeywell Sensing and Control 25 392 Series, RV6 Series 0.5 W Conductive Plastic Potentiometers Figure 6. Mounting Hardware Jam Nut 7,94 mm [5/16 in] across flats 3,97 mm [5/32 in] thick ISSUE A 50099566 WARNING Mounting Nut 1/4 x 32 thread 7,94 mm [5/16 in] across flats PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. Lock Washer 10,32 mm [5/16 in] outside diameter 0,64 mm [0.025 in] thick O-Ring WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office or: E-mail: info.sc@honeywell.com Internet: sensing.honeywell.com Phone and Fax: USA/Canada +1-800-537-6945 International +1-815-235-6847; +1-815-235-6545 Fax Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 honeywell.com 50099566-A-ENIL50 October 2014 (c) 2014 Honeywell International Inc. All rights reserved.