BYW95A - BYW96E
AVALANCHE FAST SOFT-RECOVERY
RECTIFIER DIODES
PRV : 200 - 1000 Volts
Io : 3.0 Amperes
FEATURES :
* High current capability
* High surge current capability
* High reliability
* Low reverse current
* Low forward voltage drop
* Fast switching for high efficiency
MECHANICAL DATA :
* Case : DO-201AD Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 1.16 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25
°
C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL BYW
95A BYW
95B BYW
95C BYW
96D BYW
96E UNIT
Maximum Repetitive Peak Reverse Voltage VRRM 200 400 600 800 1000 V
Maximum Continuous Reverse Voltage VR200 400 600 800 1000 V
Min. Reverse Avalanche Breakdown Voltage @ IR = 0.1 mA V(BR)R-min 300 500 700 900 1100 V
Maximum Average Forward Current Ttp= 60 °C (Note 1) IF(AV) 3.0 A
Maximum Non-Repetitive Peak Forward Surge Current IFSM 70 A
Maximum Repetitive Peak Forward Current IFRM 15 A
Maximum Forward Voltage at IF = 5.0 Amps. VF1.5 V
Maximum Reverse Current at Reverse Voltage IR5.0 µA
Maximum Reverse Current at Reverse Voltage Tj = 165 °CIR(H) 150 µA
Maximum Reverse Recovery Time (Note 2) Trr 250 300 ns
Thermal Resistance - Junction to Ambient RθJA 75 K / W
Junction Temperature Range TJ - 65 to + 175 °C
Storage Temperature Range TSTG - 65 to + 175 °C
Notes :
(1) Lead Length 10 mm.
(2) Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A
Page 1 of 2 Rev. 02 : March 24, 2005
RATING
DO-201AD
0.21 (5.33)
0.19 (4.82)
0.375 (9.52)
0.285 (7.24)
0.052 (1.32)
0.048 (1.22)
1.00 (25.4)
MIN.
1.00 (25.4)
MIN.
Dimensions in inches and ( millimeters )
* Pb / RoHS Free
RATING AND CHARACTERISTIC CURVES ( BYW95A - BYW96E )
FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
+
NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF.
2. Rise time = 10 ns max., Source Impedance = 50 ohms.
3. All Resistors = Non-inductive Types.
FIG.2 - DERATING CURVE FOR OUTPUT FIG.3 - MAXIMUM NON-REPETITIVE PEAK
RECTIFIED CURRENT FORWARD SURGE CURRENT
0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100
TIE-POINT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz
FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.5 - TYPICAL REVERSE CHARACTERISTICS
0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0
FORWARD VOLTAGE, VOLTS
Page 2 of 2 Rev. 02 : March 24, 2005
2.4
1.8
1.2
0.6
3.0
10
10
1.0
0
100
0
60
40
20
0.1
10
80
0.0
0.01
1.0
0.1
100 140
020 40 60 12
0
PERCENT OF RATED REVERSE
VOLTAGE, (%)
PEAK FORWARD SURGE
CURRENT, AMPERES
AVERAGE FORWARD OUTPUT
CURRENT, AMPERES
FORWARD CURRENT, AMPERES
REVERSE CURRENT,
MICROAMPERES
TJ = 25 °C
TJ = 100 °C
Pulse Width = 300 µs
2% Duty Cycle
TJ = 25 °C
SET TIME BASE FOR 50/100 ns/cm
Trr
+ 0.5 A
0
- 0.25 A
- 1.0 A
1 cm
50 Vdc
(approx)
OSCILLOSCOPE
( NOTE 1 )
1
50 10
D.U.T. PULSE
GENERATOR
( NOTE 2 )