FDBA / HDBA series UTE C 93422 Mod HE 302, HE 303, NF-L 54130 et / and EN 3646 Summary / Sommaire Introduction 2 Presentation 2 Advantages 3 Avantages 3 Synoptic 4 Synoptique 4 Technical characteristics 5 Caracteristiques techniques 6 Part numbering system 7 Systeme de reference 8 Key orientation 9 Detrompage angulaire 9 Arrangements 10 Arrangements 10 Receptacles 11 Embases 11 Hermetic receptacles 14 Embases hermetiques 14 Plugs 16 Fiches 16 Mating and unmating dimensions 18 Accouplements 18 Protective covers 19 Capuchons 19 Accessories 20 Accessoires 20 Contacts and tools 22-23 Overal dimensions and characteristics are given for indication guideance only. DEUTSCH reserves the right to modify them for production improvement reasons. Contacts et outillages 22-23 Les cotes d'encombrements ainsi que les caracteristiques ne sont donnees qu'a titre indicatif. DEUTSCH se reserve le droit de les modifier dans le souci d'ameliorer ses fabrications. Introduction / Presentation 1 3 5 2 7 6 4 1 Triple wire sealing. 2 Mechanical retention of the insert by a snap ring. 3 Interfacial seal ensured by compression of insert and static/dynamic seal. 4 Contacts individual sealing at coupling stage by compression of elastomer conical risers on hard insert. 5 Anti-friction washers for constant mating force. 6 Insert to shell sealing with potting. 7 Connector rear part fitted with a teeth anti-rotation system assuming an effective tightening and clamping. 1 Etancheite garantie sur chaque cable, grace a plusieurs barrieres d'etancheite. 2 Retention mecanique de l'isolant par clip. 3 Etancheite interfaciale garantie par compression de l'isolant et joint peripherique. 4 Etancheite individuelle des contacts assuree a l'accouplement par compression des cheminees elastomere sur isolant dur. 5 Rondelles anti-friction, permettant a l'effort de verrouillage de rester constant. 6 Etancheite entre boitier et isolant garantie par potting. 7 Systeme anti-rotation par crans sur l'arriere du corps de prise permettant un serrage et blocage efficaces des accessoires. 2 FDBA/HDBA Advantages / Avantages 1 Bayonet coupling 2 Connector meet requirements of UTE C 93422 models HE 302 and HE 303, NF L 54130, specification BES/SST/ELC/321 Prod., (B.A.C. and Aerospatiale) and ASD/AECMA EN 3646. 3 4 5 Black anodize, nickel plating or cadmium aluminium shells. Hermetics are nickel plated steel, stainless steel and nickel plated aluminium. Silicone elastomer and thermosetting resin insert. Silicone elastomer and sintered glass for hermetic. Gain in weight (25%) and overall dimension (23%) compared to NAS 1599 connectors. Gain in weight (50%) for aluminium hermetic version compose to steel and stainless steel hermetic version. 1 Verrouillage baionnettes. 2 Connecteur conforme aux normes UTE C 93422 modeles HE 302 et HE 303, NF-L 54130, a la specification BES/SST/ELC/321 Prod., (B.A.C. et Aerospatiale) et ASD/AECMA EN 3646. 3 Boitier en alliage d'aluminium anodise noir, nickele ou cadmie. Hermetique en acier nickele, inox, aluminium anodise noir ou nickele. 4 Isolant en elastomere silicone et en resine thermodurcissable. Hermetique, isolant en elastomere de silicone et verre fritte. 5 Gain de masse (25%) et d'encombrement (23%) par rapport aux connecteurs de la NAS 1599. Version hermetique aluminium gain de masse (50%) par rapport aux version acier et acier inoxydable hermetique. 6 Crimping contacts size 20, 16 and 12. 7 Solder contacts hermetic shells. 6 Contacts a sertir de taille 20, 16 et 12. 8 Contacts for printed circuit available in sealed and hermetic shells. 7 Embases hermetiques avec contacts a souder. 9 Back silicone insert on each wire to accept the new generation of aeronautic cables. 8 Contacts a picots disponibles pour circuit imprime, embase etanche et hermetique. 10 9 sizes of shells and 24 arrangements 9 Isolant arriere a barrieres reduites acceptant les nouveaux cables utilises en aeronautique. available. 10 9 tailles de boitiers et 24 arrangements disponibles. 3 FDBA/HDBA Synoptic / Synoptique Accessories Accessoires Plugs Fiches Receptacles Embases Accessories Accessoires 4 screw square / Box mounting Collerette carree Fixation 4 vis A451 Lightened nut Ecrou arriere allege Nut Ecrou arriere Lightened nut Ecrou arriere allege Flat gasket / Joint a plat 50 A285 56 A285 A451 Nut Ecrou arriere Round nut box Mounting Collerette ronde Fixation ecrou 54 059 059 Straight cable clamp Serre cable droit With earth continuity Avec couronne de masse 57 Straight cable clamp Serre cable droit Hermetical receptacles Embases hermetiques 4 screw square Box mounting Collerette carree Fixation 4 vis 50H 081 Elbowed cable clamp Serre cable coude 58H 081 Elbowed cable clamp Serre cable coude 4 screw square box Mounting pin contacts Collerette carree Contacts a picot Joint a plat Flat gasket 50H A276A Protective cap for receptacles Capuchons pour embases Round nut box Mounting Collerette ronde Fixation ecrou 54H Protective cap for plugs Capuchons pour fiches DBAC 56 DBAC 50 * Soldered box mounting Collerette a souder 53H DBAC 50-54 * Dummy receptacle Pris de repos 50PR *See page 19 / Voir page 19 4 DBAC 56-54 DBAC 56-56 FDBA/HDBA Technical Characteristics Mechanical Shell Material Insert Plating Material Sealed version Hermetic version Sealed version Hermetic version Fluid resistance Pressure resistance Contacts Material and plating Retention Vibrations Physical shocks Hermetic version Sealed version Hermetic version Sealed version Sealed version Hermetic version Durability Shielding Aluminium alloy Steel, stainless steel or aluminium alloy Black anodize, nickel plating or cadmium Thermosetting resin, silicone elastomere Sintered glass insert (in accordance with BES/SST/ELC/321/Prod. and MIL-C-26482) Oronite M2V, skydrol, JP2 and JP4 kerosene, engine oils and hydraulics fluids Up to 70 bars. Withstand to other power, consult us Copper alloy - Gold over nickel Ferroux alloy - Gold over nickel - Solder type By clip on each contact integreat daN Size 20 - 9 -+ 0,13 0 Size 16 - 11-+ 0,13 daN 0 + 0,13 daN Size 12 - 11- 0 In accordance with MIL-STD 202 method 204, condition B 100g 11 ms in the 3 axes 50g in the 3 axes 500 full coupling and uncoupling cycles 5m (FDBA 57 version) Climatical Service temperature Thermal shocks Sealing Air leackage Salt spray - 55 C to + 200 C Sealed and steel/stainless steel and hermetic version Aluminium hermetic version Sealed version Hermetic version 10 cycles from - 55 C to + 200 C 10 cycles from - 55 C to + 200 C - 1 cycle 10 H/200 C (in accordance with MIL-C-26482). Maximum leackage 16 cm3/h under 2,1 bars 1.10-6 mbar.l/s under 1 bar vaccum. 48 hours Electrical Withstanding voltage At sea level Service voltage Sealed version Insulation resistance Contacts maximum current Hermetic version Sealed version Hermetic version Sealed and aluminium hermetic version : Stainless steel and steel hermetic version Contact resistance Sealed and aluminium hermetic version Stainless steel and steel hermetic version Allowed wires section Sealed version Hermetic version Diameter over insulation sheath Sealed version Service 1 - 1500 V eff. 50Hz Service 2 - 2300 V eff. 50Hz Service 1 - 500 V eff. 50Hz Service 2 - 750 V eff. 50Hz 500 V eff. 50 Hz to 5000 M to 25C and 60% HR to 5000 M to 20C and 65% HR Size 20 : 7,5 A max. Size 16 : 13 A max. Size 12 : 23 A max. Size 20 : 5 A max. Size 16 : 10 A max. Size 12 : 17 A max. Size 20 : 3 m under max intensity Size 16 : 2 m under max intensity Size 12 : 1,5 m under max intensity Size 20 : 21 m under max intensity Size 16 : 14 m under max intensity Size 12 : 11 m under max intensity Size 20 : 0,21 to 0.60mm 2 Size 16 : 0,60 to 1,34mm 2 Size 12 : 1,91 to 3,18mm 2 Size 20 : 0,21 to 0,93mm2 Size 16 : 0,60 to 0,91mm 2 Size 12 : 1,91 to 3,18mm 2 Size 20 : 0,71 to 2,11mm Size 16 : 1,20 to 2,62mm Size 12 : 1,93 to 4,01mm 5 FDBA/HDBA Caracteristiques Techniques Mecaniques Boitier Matiere Isolant Revetement Matiere Version etanche Version hermetique Version etanche Version hermetique Resistance aux fluides Tenue en pression de l'isolant verre Contacts Matiere et revetement Retention Vibrations Chocs Version hermetique Version etanche Version hermetique Version etanche Version etanche Version hermetique Endurance Continuite de masse Alliage d'aluminium Acier, acier inoxydable ou alliage d'aluminium Anodise noir, nickele ou cadmie Resine thermodurcissable et elastomere silicone Verre fritte (conforme BES/SST/ELC/321/Prod. et MIL-C-26482). Oronite M2V, skydrol, kerosene JP2 et JP4, huiles moteurs et fluides hydrauliques Jusqu'a 70 bars. Tenue en pression superieure, nous consulter Alliage cuivreux - Or sur nickel Alliage ferreux - Or sur nickel - Type a souder Par clip unitaire a chaque contact integre dans l'isolant + 0,13 daN Taille 20 - 9 - 0 + 0,13 Taille 16 - 11 - 0 daN + 0,13 daN Taille 12 - 11 - 0 Conforme a la norme MIL-STD 202 methode 204, condition B 100g 11 millisecondes dans les 3 axes 50g dans les 3 axes 500 cycles complets de verrouillages et deverrouillages 5 m (version FDBA 57) Climatiques Temperature d'utilisation Chocs thermiques - 55 C a + 200 C Etancheite Version etanche, acier, acier inoxydable et hermetique Version hermetique aluminium Version etanche Hermeticite Brouillard salin Version hermetique Version hermetique 10 cycles de - 55C a + 200C 10 cycles de - 55C a + 200C - 1 cycle 1000H/200C (conforme a la norme MIL-C-26482) Fuite a 16 cm3/h sous 2,1 bars 1.10-6 mbar. l/s sous une depression de 1 bar 48 heures Electriques Tension de tenue Au niveau de la mer Tension d'utilisation Version etanche Resistance d'isolement Intensite maximale des contacts Version Version Version Version hermetique etanche hermetique etanche et hermetique aluminium Version hermetique, Acier et acier inoxydable Resistance de contact Version etanche et hermetique aluminium Version hermetique Section cable admissible Version etanche Version hermetique Diametre sur gaine 6 Version etanche Service 1 - 1500 V eff. 50 Hz Service 2 - 2300 V eff. 50 Hz Service 1 - 500 V eff. 50 Hz Service 2 - 750 V eff. 50 Hz 500 V eff. 50 Hz a 5000 M a 25 C et 60% HR a 5000 M a 20 C et 65% HR Taille 20 : 7,5 A max. Taille 16 : 13 A max. Taille 12 : 23 A max. Taille 20 : 5 A max. Taille 16 : 10 A max. Taille 12 : 17 A max. Taille 20 : 3 m sous intensite max. Taille 16 : 2 m sous intensite max. Taille 12 : 1,5 m sous intensite max. Taille 20 : 21 m sous intensite max. Taille 16 : 14 m sous intensite max. Taille 12 : 11 m sous intensite max. Taille 20 : 0,21 a 0.60mm2 Taille 16 : 0,60 a 1,34mm2 Taille 12 : 1,91 a 3,18mm2 Taille 20 : 0,21 a 0,93mm2 Taille 16 : 0,60 a 1,91mm2 Taille 12 : 1,91 a 3,18mm2 Taille 20 : 0,71 a 2,11mm Taille 16 : 1,20 a 2,62mm Taille 12 : 1,93 a 4,01mm FDBA/HDBA Part Numbering System Deutsch part numbering system Example of order : FDBA 50 H 14-19 PN-K A499 Version Standard - 5 Stainless steel nickel plating - 6 Passivated stainless steel - 7 Special Modifications 059 081 090 A246 Shell type Square flange receptacle Solder receptacle, hermetic only Jam-nut mounting receptacle Plug Plug with RFI fingers Large square flange, hermetic only Stainless steel, consult us - *0 *3 *4 *6 *7 *8 * A499 A838 B246 - Straight cable clamp Elbowed cable clamp Delivery without contact Size 20 contact in accordance with ASNE - Nickel version connector - Olive drab cadmium - Hybrid arrangement size 20 and 16, in accordance with ASNE Shell size Contact type Index 08-10-12-14-16-18-20-22-24 P - Male contact S - Female contact Connector evolution Connector type Standard and hermetic FDBA HDBA *4 H ** - ** P N - K Connector type Version Arrangements Insert clocking position Aluminium hermetic version Hermetic - H Sealed - Without index (See page 10) N - Normal W-X-Y-Z - Others *** ASD/AECMA part numbering system Example of order : EN 3646 RS 6-12-08 BN Connector model Black anodized aluminium Nickel-plated aluminium alloy, plug with grounding-spring-system Screening ring Olive-green cadmium alloy, plug with grounding-spring-system screening ring Hermetic receptacle, in passivated stainless steel - A Arrangements - RS (See page 10) - WS - Y Insert clocking position Shell size N - Normal W-X-Y-Z - Others 08-10-12-14-16-18-20-22-24 EN 3646 Connector type * * 10 - 06 Shell type Sealed or hermetic square flange receptacle - 0 Plug - 6 Sealed or hermetic Jam nut mounting receptacle - 7 - M N Contact type M F A B C D - Male standard contact Female standard contact Male contact undelivered Female contact undelivered Special male contact size 20 Special female contact size 20 7 FDBA/HDBA Systeme de Reference Systeme de reference Deutsch Exemple de commande : FDBA 50 H 14-19 PN-K A499 Type de boitier Embase collerette carree Embase collerette a souder uniquement hermetique Embase collerette ronde Fiche Fiche avec couronne de masse Embase collerette carree large, uniquement hermetique Version inox, nous consulter - *0 *3 *4 *6 *7 *8 * Modifications speciales 059 081 090 A246 A499 A838 B246 Version Standard - 5 Inox nickele - 6 Inox passive - 7 Type de connecteur - Serre-cable droit Serre-cable coude Connecteur livre sans contact Contact taille 20 conforme a la norme ASNE - Connecteur version nickele - Cadmie vert olive - Arrangements hybrides gauge 20 plus 16, conformes a la norme ASNE Taille du boitier Genre du contact Indice 8-10-12-14-16-18-20-22-24 P - Contact male S - Contact femelle Evolution du connecteur Standard et hermetique FDBA HDBA Type de connecteur Aluminium version hermetique *4 H ** - ** P N - K Version Arrangements Positionnement de l'isolant Hermetique - H Etanche - Sans indice (Voir page 10) N - Normal W-X-Y-Z - Autres *** ASD/AECMA systeme Exemple de commande : EN 3646 RS 6-12-08-BN Modele de connecteur Aluminium anodise noir Fiche avec couronne RFI, alliage d'aluminium nickele Fiche avec couronne RFI, cadmie vert olive Embase hermetique, acier inoxydable passive - Arrangements A RS WS Y (Voir page 10) Positionnement de l'isolant Taille du boitier N - Normal W-X-Y-Z - Autres 08-10-12-14-16-18-20-22-24 EN 3646 Type de connecteur * * 10 06 Type de boitier Embase etanche ou hermetique a collerette carree - 0 Fiche - 6 Embase etanche ou hermetique a collerette ronde - 7 8 M N Genre du contact M F A B C D - Contact male a fut standard Contact femelle a fut standard Contact male non livre Contact femelle non livre contact male taille 20 a fut special Contact femelle taille 20 a fut special FDBA/HDBA Key Orientation / Detrompage Angulaire Clocking position is normal when the insert vertical axis is intermingled with the shell keyway axis. An unkeying can be performed between 2 connectors of same layout by angular displacement of one of the inserts in its shell. Male front face view / Vue face avant male This insert rotation is made in the clockwise for pin layouts and in the counter clockwise for socket layouts. Angular displacements on the hereafter table give clocking positions W - X - Y - or Z (see table). H A G B K J E F C D Normal clocking position Positionnement normal Le positionnement est normal lorsque l'axe vertical de l'isolant est confondu avec l'axe de la clavette du boitier (reperage N). B J E C D Arrangements A F K Cette rotation de l'isolant s'effectue dans le sens des aiguilles d'une montre pour les dispositions males et dans le sens inverse pour les dispositions femelles. Les decalages angulaires determines (voir tableau) donnent les positions W - X - Y - ou Z. H G Un detrompage peut-etre effectue entre deux connecteurs de meme disposition par un decalage angulaire de l'un des isolants dans son boitier. Normal clocking Y Positionnement Y Clocking position in degrees Contacts sizes Positionnement en degres Taille des contacts Service W X Y Z 20 16 12 8 8-3A / 8-98 8-33 60 90 210 - - - 3 3 - - - I I 8-E1* 10-6 12-3 12-8 12-10 14-4 14-5 14-12 14-15 14-19 16-8 16-21 16-26 18-11 18-32 20-16 20-39 20-41 22-21 22-12 22-41 22-55 24-19 24-31 24-61 90 90 60 45 40 43 17 30 54 60 62 85 238 63 45 16 39 30 30 90 90 112 155 92 90 110 165 152 105 119 138 318 144 126 135 135 142 165 225 180 180 203 270 184 155 315 180 275 241 222 333 252 225 175 264 226 315 255 270 292 295 273 234 331 338 340 265 347 333 349 6 314 324 6 8 10 8 14 19 16 26 32 37 41 0 27 55 61 3 5 4 1 8 5 11 16 2 21 14 31 - 4 12 19 - 1 - I II I I I II I I I II I I I I II I I II I I I II I I * To be used only with contacts like quadrax, triax, coax, twinax and optical. The mounting of power contact is forbidden. L'arrangement 8-E1 recoit uniquement des contacts de technologies signal, quadrax, triax, coax, twinax et optique. Aucun contact electrique de puissance. 9 FDBA/HDBA Arrangements / Arrangements Male insert viewed from front face / Vue face avant isolant male. G H F E D Disposition 8-3A/8-98 * 3 contacts size/taille 20 Disposition 8-33 * 3 contacts size/taille 20 A H K G Disposition 8-E1 ** 1 contact Quadrax J C Disposition 12-10 * 10 contacts size/taille 20 K Disposition 16-8 * 8 contacts size/taille 16 S h R g P B X j l A W V k f N r m q n p d e M L K a E b F c N t p e d M U R V Y D E S T N a G F W * Z Y X Q C R D S T U H H W V Disposition 24-31 31 contacts size/taille 16 HH p _ R DD n P LL CC m N BB k j - M L E f y F g h i - D e G H J K Disposition 24-61 61 contacts size/taille 20 Hermetic, consult us. Hermetiques, nous consulter. ** Obligatory accessory 164-8013-08. Accessoire obligatoire 164-8013-08. 10 x z AA C d w JJ NN B c EE MM PP KK q _ T A b v GG FF r U S E F s a u t G U S T V C D E F Disposition 22-21 * 21 contacts size/taille 16 Disposition 22-12 * 12 contacts size/taille 12 B U J E P d G Disposition 24-19 19 contacts size/taille 12 A c e V H F g X D H b f J J M Z K K J G X V K L G g j - S Y k Z A n s r h R P B a m t i - T X p _ q _ g e f N M L K S D c F G d J R E H Disposition 22-41 * 27 contacts size/taille 20 14 contacts size/taille 16 D E F Disposition 20-16 * 16 contacts size/taille 16 C b C P R G G H J N S H F B M J E Y Z a D X h K A K Disposition 18-32 * 32 contacts size/taille 20 W R l b G Disposition 14-19 * 19 contacts size/taille 20 C W D R S L B V f L B W L C U e c M A P H A T S d N D M K F b c K L E a n q L C P m P E B M N Disposition 20-41 * 41 contacts size/taille 20 B A N L f P Disposition 20-39 * 37 contacts size/taille 20 2 contacts size/taille 16 M r g R H J h S G s Z R L N J D B Disposition 18-11 * 11 contacts size/taille 16 E C P V T J D F N U K Disposition 14-15 * 14 contacts size/taille 20 1 contacts size/taille 16 C G H J G F Disposition 16-26 * 26 contacts size/taille 20 C Y k V C P A K L N H G W X K D U c Y H C T M M R J Disposition 14-12 * 8 contacts size/taille 20 4 contacts size/taille 16 Disposition 12-8 8 contacts size/taille 20 L K C D E A B X j l T A W V U D Z G H Disposition 16-21 * 16 contacts size/taille 20 5 contacts size/taille 16 C Y L J F b Z M T U L B K J S a N D Y A J Disposition 12-3 * 3 contacts size/taille 16 I C R P H M Disposition 14-5 5 contacts size/taille 16 C S V M C D T X N H U R P B D Disposition 14-4 * 4 contacts size/taille 12 G G A E B D Disposition 10-6 * 6 contacts size/taille 20 P N k j i h M T m z y x g L U n AA GG FF w f K V p _ BB HH EE v e A W q _ CC DD u d J B X r s t c H C Y Z a b D E F G Disposition 22-55 * 55 contacts size/taille20 FDBA Receptacles / Embases Rear accessory / Accessoire arriere 164-8013-** for receptacle / pour embase FDBA 50-8-E1 PN 090 37,10 max. 14,30 max. O 18,50 max. **-**CD9 164-8013-08 O 15 max. O 8,03 max. tightening torque/Couple de serrage : 0,10 mdaN max. Square flange / Collerette carree Less nut / Sans ecrou arriere FDBA 50 B L D C E C F Sealed version Version etanche B + 0,15 4 holes/trous O 3,15 sizes/tailles 8 to/a 22 4 holes/trous O 3,73 + 0,15 size/taille 24 Size Taille L max. 08 25,50 10 25,50 12 25,50 14 25,50 16 25,50 18 25,50 20 27,95 22 27,95 24 27,95 With nut / Avec ecrou arriere FDBA 50-**-A285 Size Taille L max. Max. rear accessory tightening torque Couple de serrage max. de l'accessoire arriere 08 10 12 14 16 18 20 22 24 31,45 31,45 31,45 31,45 31,45 31,45 33,85 33,85 33,85 0,35 daN 0,40 daN 0,50 daN 0,60 daN 0,65 daN 0,70 daN 0,75 daN 0,80 daN 0,90 daN B L C B D E F C G 4 holes/trous O 3,15 + 0,15 sizes/tailles 8 to/a 22 4 holes/trous O 3,73 + 0,15 size/taille 24 With straight cable clamp / Avec serre-cable droit FDBA 50-**-059 L B D C B C O allowed cable O max. cable accepte E F J 4 holes/trous O 3,15 + 0,15 sizes/tailles 8 to/a 22 4 holes/trous O 3,73 + 0,15 size/taille 24 J1 G O tightened cable O max. brides serrees Size Taille J1 max. J max. L max. Max. rear accessory tightening torque Couple de serrage max. de l'accessoire arriere 08 10 12 14 16 18 20 22 24 5,15 7,25 10,55 12,05 15,85 17,95 21,05 24,25 27,45 6,80 7,95 12,75 14,60 17,80 19,80 23,00 26,10 28,80 40,40 40,40 40,40 46,40 46,40 46,40 48,85 48,85 48,85 0,35 daN 0,40 daN 0,50 daN 0,60 daN 0,65 daN 0,70 daN 0,75 daN 0,80 daN 0,90 daN 11 With elbowed cable clamp / Avec serre-cable coude FDBA 50-**-081 Size J1 Taille max. 08 10 12 14 16 18 20 22 24 5,15 7,25 10,55 12,05 15,85 17,95 21,05 24,25 27,45 J max. L max. R max. Max. rear accessory T tightening torque max. Couple de serrage max. de l'accessoire arriere 6,80 7,95 12,75 14,60 17,80 19,80 23,00 26,10 28,80 43,80 46,15 49,60 51,85 55,25 58,70 64,50 67,60 70,70 17,40 20,20 23,60 25,50 29,70 32,60 36,00 39,20 42,80 20,70 22,00 23,80 25,30 26,80 28,30 29,90 31,60 33,20 L B D C 0,35 daN 0,40 daN 0,50 daN 0,60 daN 0,65 daN 0,70 daN 0,75 daN 0,80 daN 0,90 daN B E F C G T R O tightend cable O max. brides serrees 4 holes/trous O 3,15 + 0,15 sizes/tailles 8 to/a 22 4 holes/trous O 3,73 + 0,15 size/taille 24 O allowed cable O max. cable accepte J1 J Mounting styles / Mode de fixation Panel cutout Percage panneau C 2,50 max. sizes/tailles 8 to/a 18 5,40 max. sizes/tailles 20 to/a 24 Overall (as per accessory) Hors-tout (suivant accessoire) B max. C 0.1 D 0.15 E max. F max. G max +0 - 0.2 08 21,00 15,08 11,13 1,45 12,03 15,65 16,05 10 24,25 18,26 11,13 1,45 15,01 18,65 19,00 12 26,60 20,62 11,13 1,45 19,07 21,80 22,25 14 29,00 23,02 11,13 1,45 22,24 25,00 25,40 16 31,30 24,58 11,13 1,45 25,42 28,25 28,60 18 33,70 26,98 11,13 1,45 28,60 30,95 31,75 20 36,85 29,36 14,85 2,25 31,77 34,15 34,90 22 39,95 31,76 14,85 2,25 34,94 37,30 38,10 24 43,15 34,92 15,70 2,25 38,12 40,45 41,30 H C 3,50 max. Size Taille 4 holes/trous O 3,15 0,15 sizes/tailles 8 to/a 22 4 holes/trous O 3,73 0,15 size/taille 24 H Single hole mounting / Collerette ronde Less nut / Sans ecrou arriere FDBA 54 Size Taille 08 10 12 14 16 18 20 22 24 L max. 25,50 25,50 25,50 25,50 25,50 25,50 27,95 27,95 27,95 Max. lightened nut jam nut mounting tightening torque Couple de serrage max. ecrou fixation collerette ronde L Sealed version Version etanche 0,75 daN 1 daN 1,30 daN 1,50 daN 1,80 daN 2,10 daN 2,30 daN 2,60 daN 2,90 daN D 2,05 max. A M F With nut / Avec ecrou arriere FDBA 54-**-A285 A L M D F 12 Size Taille L max. 08 10 12 14 16 18 20 22 24 31,45 31,45 31,45 31,45 31,45 31,45 33,85 33,85 33,85 2,05 max. G Max. lightened nut jam nut mounting Max. rear accessory tightening torque tightening torque Couple de serrage max. Couple de serrage max. ecrou fixation collerette ronde de l'accessoire arriere 0,75 daN 1 daN 1,30 daN 1,50 daN 1,80 daN 2,10 daN 2,30 daN 2,60 daN 2,90 daN 0,35 daN 0,40 daN 0,50 daN 0,60 daN 0,65 daN 0,70 daN 0,75 daN 0,80 daN 0,90 daN With straight cable clamp / Avec serre-cable droit FDBA 54-**-059 L A D M 2,05 max. F M J1 G O tightened cable O max. brides serrees O allowed cable O max. cable accepte Size Taille J1 max. J max. L max. 08 10 12 14 16 18 20 22 24 5,15 7,25 10,55 12,05 15,85 17,95 21,05 24,25 27,45 6,80 7,95 12,75 14,60 17,80 19,80 23,00 26,10 28,80 40,40 40,40 40,40 46,40 46,40 46,40 48,85 48,85 48,85 Max. rear accessory Max. lightened nut jam nut mounting tightening torque tightening torque Couple de serrage max. Couple de serrage max. ecrou fixation collerette ronde de l'accessoire arriere 0,75 daN 1 daN 1,30 daN 1,50 daN 1,80 daN 2,10 daN 2,30 daN 2,60 daN 2,90 daN 0,35 daN 0,40 daN 0,50 daN 0,60 daN 0,65 daN 0,70 daN 0,75 daN 0,80 daN 0,90 daN With elbowed cable clamp / Avec serre-cable coude FDBA 54-**-081 L 2,05 max. A D M F G T O tightened cable O max. brides serrees R J1 J O allowed cable O max. cable accepte Size Taille J1 max. J max. L max. R max. T max. 08 10 12 14 16 18 20 22 24 5,15 7,25 10,55 12,05 15,85 17,95 21,05 24,25 27,45 6,80 7,95 12,75 14,60 17,80 19,80 23,00 26,10 28,80 43,80 46,15 49,60 51,85 55,25 58,70 64,50 67,60 70,70 17,40 20,20 23,60 25,50 29,70 32,60 36,00 39,20 42,80 20,70 22,00 23,80 25,30 26,80 28,30 29,90 31,60 33,20 Max. lightened nut jam nut mounting Max. rear accessory tightening torque tightening torque Couple de serrage max. Couple de serrage max. ecrou fixation collerette ronde de l'accessoire arriere 0,75 daN 1 daN 1,30 daN 1,50 daN 1,80 daN 2,10 daN 2,30 daN 2,60 daN 2,90 daN 0,35 daN 0,40 daN 0,50 daN 0,60 daN 0,65 daN 0,70 daN 0,75 daN 0,80 daN 0,90 daN Mounting styles / Mode de fixation Panel cutout Percage panneau 4,75 max. sizes/tailles 8 to/a 18 6,35 max. sizes/tailles 20 to/a 22 5,60 max. size/taille 24 N Overall (as per accessory) Hors-tout (suivant accessoire) H Size Taille A max. D 0.15 F 0.15 G max. +0 - 0.2 H M max +0 - 0.2 N 08 23,30 16,70 12,03 15,65 14,70 19,20 13,85 10 26,60 16,70 15,01 18,65 17,85 22,37 17,05 12 30,40 16,70 19,07 21,80 22,60 27,12 21,15 14 33,80 16,70 22,24 25,00 25,75 30,30 24,30 16 37,00 16,70 25,42 28,25 28,95 33,47 27,45 18 40,15 16,70 28,60 30,95 32,10 36,67 30,65 20 45,20 19,10 31,77 34,15 35,30 39,82 33,80 22 48,35 19,10 34,94 37,30 38,45 43,02 37,00 24 51,55 19,10 38,12 40,45 41,65 46,17 40,15 13 FDBA/HDBA Hermetic Receptacles / Embases Hermetiques Square flange / Collerette carree Panel cutout Percage panneau For printed circuit boards Pour circuits imprimes FDBA 50H FDBA 50H D FDBA 50H-**-A276A D1 1,70 max. C B L C 1,70 max. 9,5 max. C F H F C B 0,70 max. 4 holes/trous O 3,15 0,15 sizes/tailles 8 a/to 22 4 holes/trous O 3,73 0,15 size/taille24 P 13,50 max. FDBA 58H FDBA 58H D B1 D1 1,70 max. C1 C1 4 holes/trous O 3,15 0,15 sizes/tailles 8 a/to 22 4 holes/trous O 3,73 0,15 size/taille 24 C1 F H C1 B1 P 4 holes/trous O 3,80 0,1 4 holes/trous O 3,80 0,1 Mounting styles Mode de fixation G 3,20 max. 14 Size Taille B max. B1 max. C 0,1 C1 0,1 D 0,15 D1 max. F max. G max. +0 - 0.2 H L max. P max. Sizes/Tailles 20 16 08 21,00 26,50 15,08 18,10 12,65 1,55 12,03 2,50 16,05 13,75 6,85 8,95 10 24,25 29,10 18,26 20,62 12,65 1,55 15,01 2,50 19,00 13,75 6,85 8,95 12 26,60 32,25 20,62 23,82 12,62 1,55 19,07 2,50 22,25 13,75 6,85 8,95 14 29,00 34,65 23,02 26,18 12,65 1,55 22,24 2,50 25,40 13,75 6,85 8,95 16 31,30 37,00 24,58 28,57 12,65 1,55 25,42 2,50 28,60 13,75 6,85 8,95 18 33,70 39,05 26,98 30,55 12,65 1,55 28,60 2,50 31,75 13,75 6,85 8,95 20 36,85 43,00 29,36 32,94 14,09 2,25 31,77 5,40 34,90 15,35 7,10 9,20 22 39,95 44,95 31,76 34,92 14,09 2,25 34,94 5,40 38,10 15,35 7,10 9,20 24 43,15 48,15 34,92 38,10 14,93 2,25 38,12 5,40 41,30 15,35 6,25 8,35 Single hole mounting / Collerette ronde Mounting styles Mode de fixation FDBA 54H D G B M E F Panel cutout Percage panneau N H A * *The contacts size 20 are sunked in the shell. The contacts size 16 can stick out of 1,35 max. *Les contacts taille 20 sont en retrait dans le boitier. Les contacts taille16 peuvent depasser de 1,35 max. H A max. B max. D 0.15 E max. F max. G max. 08 27,30 24,00 17,81 2,50 12,03 3,17 14,40 19,20 13,48 0,75 daN 10 30,50 27,20 17,81 2,50 15,01 3,17 17,58 22,37 16,66 1 12 35,30 32,00 17,81 2,50 19,07 3,17 22,45 27,12 20,80 1,30 daN 14 38,40 35,10 17,81 2,50 22,24 3,17 25,52 30,30 23,95 1,50 daN 16 41,60 38,30 17,81 2,50 25,42 3,17 28,70 33,47 27,10 1,80 daN 18 44,80 41,50 17,81 2,50 28,60 3,17 31,87 36,67 30,27 2,10 daN 20 49,60 46,20 22,58 3,30 31,77 6,35 35,05 39,82 33,45 2,30 daN 22 52,70 49,40 22,58 3,30 34,94 6,35 38,22 43,02 36,62 2,60 daN 24 55,90 52,60 23,67 3,30 38,12 6,35 41,40 46,17 39,80 2,90 daN + 0,2 -0 M max. N Max. lightened nut jam nut mounting tightening torque Couple de serrage max. ecrou de fixation collerette ronde Size Taille + 0,2 -0 daN Solder flange / Collerette a souder Mounting styles Mode de fixation FDBA 53H D Panel cutout Percage panneau D1 0,95 max. F G H A P Size Taille A max. D 0.5 D1 max. F max. G max. + 0,2 -0 H P max. Sizes/Tailles 20 16 08 10 12 14 16 18 20 22 24 16,10 19,25 21,65 24,85 28,00 31,15 33,55 36,70 39,90 11,50 11,50 11,50 11,50 11,50 11,50 13,11 13,11 13,95 2,60 2,60 2,60 2,60 2,60 2,60 3,35 3,35 3,35 12,03 15,01 19,07 22,24 25,42 28,60 31,77 34,94 38,12 14,35 17,15 19,90 23,10 26,25 29,45 31,80 35,00 38,15 14,75 17,55 20,30 23,50 26,65 29,85 32,20 35,40 38,55 7,95 7,95 7,95 7,95 7,95 7,95 8,20 8,20 7,35 10,00 10,00 10,00 10,00 10,00 10,00 10,30 10,30 9,50 15 FDBA Plugs / Fiches Rear accessory / Accessoire arriere 164-8013-** for plug / pour fiche FDBA 56-8-E1 SN 090 37,10 max. 14,30 max. O 18,50 max. **-**CD9 164-8013-08 O 15 max. O 8,03 max. tightening torque / Couple de serrage : 0,10 mdaN max. Less nut / Sans ecrou arriere FDBA 56 / FDBA 57-**-A499 Shell type 57 with RFI fingers must be ordered in accordance with part numbering system with the modification A499 (nickel version connector). L Sealed version Version etanche En version 57, equipee de la couronne de masse RFI, commander imperativement le connecteur dans le systeme de reference avec la modification A499 (connecteur nickele). F Size Taille F max. L max. 08 10 12 14 16 18 20 22 24 17,75 21,05 24,60 28,05 31,10 34,40 37,65 40,90 44,10 25,55 25,55 25,55 25,55 25,55 25,55 27,10 27,10 27,10 With nut / Avec ecrou arriere FDBA 56-**-A285 / FDBA 57-**-A5787 Size Taille F max. G max. L max. Max. rear accessory tightening torque Couple de serrage max. de l'accessoire arriere 08 10 12 14 16 18 20 22 24 17,75 21,05 24,60 28,05 31,10 34,40 37,65 40,90 44,10 15,65 18,65 21,80 25,00 28,25 30,95 34,15 37,30 40,45 31,45 31,45 31,45 31,45 31,45 31,45 33,00 33,00 33,00 0,35 daN 0,40 daN 0,50 daN 0,60 daN 0,65 daN 0,70 daN 0,75 daN 0,80 daN 0,90 daN L F G With straight cable clamp / Avec serre-cable droit FDBA 56-**-059 / FDBA 57-**-A5559 L F J 16 O allowed cable O max. cable accepte J1 G O tightened cable O max. brides serrees Size Taille F max. G max. J1 max. J mini L max. Max. rear accessory tightening torque Couple de serrage max. de l'accessoire arriere 08 10 12 14 16 18 20 22 24 17,75 21,05 24,60 28,05 31,10 34,40 37,65 40,90 44,10 15,65 18,65 21,80 25,00 28,25 30,95 34,15 37,30 40,45 5,15 7,25 10,55 12,05 15,85 17,95 21,05 24,25 27,45 6,80 7,95 12,75 14,60 17,80 19,80 23,00 26,10 28,80 40,40 40,40 40,40 46,40 46,40 46,40 47,95 47,95 47,95 0,35 daN 0,40 daN 0,50 daN 0,60 daN 0,65 daN 0,70 daN 0,75 daN 0,80 daN 0,90 daN With Elbowed cable clamp / Avec serre-cable coude FDBA 56-**-081 / FDBA 57-**-A5560 L G F T O tightened cable O max. brides serrees R Size Taille F max. G max. J1 max. J mini L max. R max. T max. Max. rear accessory tightening torque Couple de serrage max. de l'accessoire arriere 08 10 12 14 16 18 20 22 24 17,75 21,05 24,60 28,05 31,10 34,40 37,65 40,90 44,10 15,65 18,65 21,80 25,00 28,25 30,95 34,15 37,30 40,45 5,15 7,25 10,55 12,05 15,85 17,95 21,05 24,25 27,45 6,80 7,95 12,75 14,60 17,80 19,80 23,00 26,10 28,80 43,85 46,20 49,65 51,90 55,30 58,75 63,65 66,75 69,85 17,40 20,20 23,60 25,50 29,70 32,60 36,00 39,20 42,80 20,70 22,00 23,80 25,30 26,80 28,30 29,90 31,60 33,20 0,35 daN 0,40 daN 0,50 daN 0,60 daN 0,65 daN 0,70 daN 0,75 daN 0,80 daN 0,90 daN J1 J O allowed cable O max. cable accepte 17 FDBA Mating and unmating dimensions / Accouplements Square flange / Collerette carree Jam nut receptacle / Collerette ronde L1 L3 G G1 FDBA 50 FDBA 54 3,20 max. K 18 FDBA 56 FDBA 56 8,90 max. L L2 Size Taille K max. L max. L1 max. L2 max. L3 max. G max. G1 max. 08 - 18 20 - 22 24 13,30 11,15 10,30 38,25 44,30 45,15 28,65 32,30 33,15 42,45 46,35 46,35 34,20 36,55 36,55 2,50 5,40 5,40 4,75 6,35 5,60 FDBA / HDBA Protective Covers / Capuchons For receptacles / Pour embases DBAC 50 DBAC 50-54 G L Overall lengh after mating Depassement apres verrouillage 4,10 mini. E A L2 L2 L2 P For receptable mounting on square flange receptable Fixation sur collerette carree For plug mounting on single hole mounting Fixation sur embase collerette ronde For plugs / Pour fiches DBAC 56 DBAC 56-54 DBAC 56-58 G L1 4,10 mini. B E1 G1 A1 F L2 L2 L2 L2 P1 For plug attached to cable clamp Fixation sur accessoire arriere For plug mounting on single hole mounting Fixation sur embase collerette ronde For plug attached on plug Fixation sur fiche Nota : Mod A190, add at the end of the reference, permit to replace the chain by a nylon wire. La Mod A190, ajoutee a la fin de la reference, vous permet d'obtenir un fil nylon a la place de la chainette. Size Taille A max. A1 max. B max. E max. E1 max. F max. G mini. G1 mini L max. L1 max. L2 max. P max. P1 max. 08 16,60 18,30 16,10 10,15 9,60 12,03 14,60 12,45 17,85 18,65 79,00 14,20 14,40 10 19,70 21,50 18,10 10,15 9,60 15,01 17,70 15,70 17,85 18,65 79,00 14,20 14,40 12 24,60 25,40 22,10 10,15 9,60 19,07 22,50 18,85 17,85 18,65 95,00 14,20 14,40 14 27,80 28,60 24,10 10,15 9,60 22,24 25,70 22,10 17,85 18,65 95,00 14,20 14,40 16 30,90 31,80 27,10 10,15 9,60 25,42 28,90 25,50 17,85 18,65 95,00 14,20 14,40 18 34,10 34,90 30,10 10,15 9,60 28,60 32,00 27,35 17,85 18,65 95,00 14,20 14,40 20 37,30 38,10 33,10 10,15 9,60 31,77 35,20 30,40 17,85 20,25 111,00 14,20 16,00 22 40,50 41,30 36,10 10,15 9,60 34,94 38,40 33,30 17,85 20,25 111,00 14,20 16,00 24 44,10 44,50 41,10 10,30 10,45 38,12 41,60 36,80 18,85 21,10 111,00 15,20 16,80 19 FDBA Accessories / Accessoires F F F F Lightened backshell Ecrou arriere allege Standard backshell Ecrou arriere standard Straight cable clamp Serre-cable droit Elbowed cable clamp Serre-cable coude Size Taille Part number Reference F max. Part number Reference F max. Part number Reference F max. Part number Reference F max. 08 004-0003-08 7,10 006-0909-08 14,00 006-0910-08 22,25 006-0908-08 25,70 10 004-0003-10 7,10 006-0909-10 14,00 006-0910-10 22,25 006-0908-10 28,05 12 004-0003-12 7,10 006-0909-12 14,00 006-0910-12 28,25 006-0908-12 31,50 14 004-0003-14 7,10 006-0909-14 14,00 006-0910-14 28,25 006-0908-14 33,75 16 004-0003-16 7,10 006-0909-16 14,00 006-0910-16 28,25 006-0908-16 37,15 18 004-0003-18 7,10 006-0909-18 14,00 006-0910-18 28,25 006-0908-18 40,60 20 004-0003-20 7,10 006-0909-20 14,00 006-0910-20 28,25 006-0908-20 43,95 22 004-0003-22 7,10 006-0909-22 14,00 006-0910-22 28,25 006-0908-22 47,05 24 004-0003-24 7,10 006-0909-24 14,00 006-0910-24 28,25 006-0908-24 50,55 FDBA Dummy receptacle for plugs / Prise de repos pour fiches B L C E F C B 4 holes/trous O 3,15 0,15 sizes/tailles 8 to/a 22 4 holes/trous O 3,73 0,15 size/taille 24 20 Size Taille Part number Reference B max. C 0,1 E max. F max. L max. 08 10 12 14 16 18 20 22 24 DBA 50 PR 08 DBA 50 PR 10 DBA 50 PR 12 DBA 50 PR 14 DBA 50 PR 16 DBA 50 PR 18 DBA 50 PR 20 DBA 50 PR 22 DBA 50 PR 24 21,00 24,20 26,55 28,95 31,30 33,70 36,85 39,95 43,15 15,08 18,26 20,62 23,02 24,58 26,98 29,36 31,76 34,92 1,95 1,95 1,95 1,95 1,95 1,95 2,55 2,55 2,55 12,03 15,01 19,07 22,24 25,42 28,60 31,77 34,94 38,12 14,70 14,70 1470 14.70 14.70 14,70 17,20 17,20 17,20 FDBA/HDBA Panel Seal / Joints Plats For square flange receptacle / Pour embase collerette carree 2,50 max. sizes/tailles 8 to/a 18 5,40 max. sizes/tailles 20 to/a 24 2,50 max. sizes/tailles 8 to/a18 5,40 max. sizes/tailles 20 to/a 24 Hermetic version Version hermetique H C B 4 holes/trous O 3,30 0,15 sizes/tailles 8 to/a 22 4 holes/trous O 4,30 0,15 size/taille 24 Front flange mounting Joint arriere collerette Rear flange mounting Joint avant collerette For hermetic version Pour version hermetique Hermetic version sealed version Pour version etanche et hermetique Part number Reference C Sealed version Version etanche 3,20 max. Size Taille B H max. B max. C 0,1 H max. Part number Reference For sealed version Pour version etanche H max. Part number Reference Size Taille 08 108-0003-08-B756 12,50 21,10 15,10 14,90 108-0005-08-B756 13.20 108-0001-08-B756 08 10 108-0003-10-B756 15,40 24,30 18,30 17,50 108-0005-10-B756 16.40 108-0001-10-B756 10 12 108-0001-12-B756 19,50 26,70 20,60 20,30 108-0005-12-B756 19.50 108-0001-12-B756 12 14 108-0001-14-B756 22,70 29,10 23,00 23,50 108-0005-14-B756 22.70 108-0001-14-B756 14 16 108-0001-16-B756 25,90 31,30 24,60 26,70 108-0005-16-B756 25.90 108-0001-16-B756 16 18 108-0003-18-B756 29,10 33,70 27,00 29,90 108-0005-18-B756 27.50 108-0001-18-B756 18 20 108-0003-20-B756 32,30 36,90 29,40 32,30 108-0003-20-B756 30.60 108-0001-20-B756 20 22 108-0003-22-B756 35,40 40,10 31,75 35,40 108-0003-22-B756 33.50 108-0001-22-B756 22 24 108-0003-24-B756 38,60 43,30 34,90 38,60 108-0003-24-B756 37.00 108-0001-24-B756 24 21 FDBA Contacts / Contacts Color code Code couleur 2 1 Color code Code couleur 1 2 4 to/a 5 mm Connector rear face Face arriere du connecteur Male Contact Contact male Wires strip lengt Longueur de denudage Female Contact Contact femelle CONTACTS Part number Reference CABLES SEALING PLUG/OBTURATEURS Color code Type Size Code couleur Genre Taille 1 2 Red Rouge Red Rouge Standard 006-0937-20 A 006-0912-20 A P S 006-0972-20 A P 006-0973-20 A S 006-0044-20 A* P 006-0055-20 A* S 006-0982-20 P 006-0985-20 S 025-0404-20 P 025-0405-20 S 006-0983-20 P 006-0984-20 S 025-0402-20 P 025-0403-20 S 006-1060-20 P 006-1062-20 S 025-0406-20 P 025-0407-20 S 006-0937-16 A P 006-0912-16 A S 006-1102-16 A P 006-1104-16 A S 025-0870-16 A P 025-0871-16 A 006-1168-16 A P 006-1169-16 A S 006-0937-12 A P 006-0912-12 A S 006-1157-12 A P 006-1159-12 A S 20 20 20 20 20 20 20 20 20 16 16 16 16 12 12 Observations Red white Enlarged bucket contact Rouge Blanc Contact a fut agrandi Red Purple Enlarged bucket contact Rouge Violet Contact a fut agrandi Mark Ch Chromel contact Repere Ch Contact chromel Mark Ch Chromel contact Repere Ch Contact chromel MarkAl Alumel contact Repere Al Contact alumel Mark Al Alumel contact Repere Al Contact alumel Mark Co Constantan contact Repere Co Contact constantan Mark Co Constantan contact Repere Co Contact constantan Blue Blue Bleu Bleu Standard Blue Orange Enlarged bucket contact Bleu Orange Contact a fut agrandi Blue Black Reduced bucket contact Bleu Noir Contact a fut reduit Blue Red Reduced bucket contact Bleu Rouge Contact a fut reduit Yellow Yellow Jaune Jaune Standard Yellow Blue Reduced bucket contact Jaune Bleu Contact a fut reduit Section AWG Wire O over sheath Part number Code in/en mm2 Gauge O sur gaine Reference couleur 0,21 to/a 0,60 20 to / a 24 0,85 to/a 2,10 006-0893-20 Red Rouge 0,055 to/a 0,15 26 to / a 30 0,85 to/a 2,10 006-0893-20 0,21 to/a 0,93 18 to/a 22 0,85 to/a 2,10 006-0893-20 0,21 to/a 0,60 20 to/a 24 0,71 to/a 2,10 006-0893-20 0,38 to/a 0,93 18 to/a 22 0,71 to/a 2,10 006-0893-20 0,21 to/a 0,60 20 to/a 24 0,71 to/a 2,10 006-0893-20 0,38 to/a 0,93 18 to/a 22 0,71 to/a 2,10 006-0893-20 0,21 to/a 0,60 20 to/a 24 0,71 to/a 2,10 006-0893-20 0,38 to/a 0,93 18 to/a 22 0,71 to/a 2,10 006-0893-20 0,60 to/a 1,34 16 to/a 20 1,28 to/a 2,62 006-0893-16 0,93 to/a 1,91 14 to/a 18 1,28 to/a 2,62 006-0893-16 0,055 to/a 0,15 - 26 to/a 30 20 to/a 24 1,28 to/a 2,62 1,28 to/a 2,62 006-0893-16 006-0893-16 1,91 to/a 3,18 12 to/a 14 1,93 to/a 4,01 006-0893-12 0,60 to/a 1,34 16 to/a 20 1,93 to/a 4,01 006-0893-12 Red Rouge Red Rouge Red Rouge Red Rouge Red Rouge Red Rouge Red Rouge Red Rouge Blue Bleu Blue Bleu Blue Bleu Blue Bleu Yellow Yellow Standard contacts supplied with connector. Contacts standards livres avec le connecteur. * Contacts supplied with mod A246 and B246 (in accordance with ASNE 052/053/054). Contacts livres avec les mods A246 et B246 (conformes a la norme ASNE 052/053/054). Quadrax contacts / Contacts Quadrax Crimping contacts / contacts a sertir 22 Tools Outillages/tools / Outillages Commercial Part number pn Type Taille Size For Contacts contacts For Body body Ref.Reference commerciale Genre Size Pour Pourlescontacts contacts Pour le corps 187-0108-08 P 8 M22520/2-01-K709 M22520/5-01 / M22520/5-45B 187-0109-08 S 8 M22520/2-01-K709 M22520/5-01 / M22520/5-45B FDBA Tools / Outillages O H 0 T C 9 TOOLS / OUTILLAGES Insertion and extraction Extraction tool non wired contacts tool, wired contacts Outils d'extraction contacts non cables Crimping tool / Pince a sertir Outil d'insertion et Part number Alternate end Part number Turret had part number d'extraction contacts cables Reference Embout de rechange Reference Reference de la tourelle M 15570-20 057-0481-60 057-0502-60 057-0461-11 057-0462-21 M 15570-20 057-0481-60 057-0502-60 057-0463-12 057-0464-32 M 155570-20 057-0481-60 057-0502-60 057-0461-11 057-0462-21 M 15570-20 057-0481-60 057-0502-60 057-0461-11 057-0462-21 M 15570-20 057-0481-60 057-0502-60 057-0461-11 057-0462-21 M 15570-20 057-0481-60 057-0502-60 057-0461-11 057-0462-21 M 15570-20 057-0481-60 057-0502-60 057-0461-11 057-0462-21 M 15570-20 057-0481-60 057-0502-060 057-0461-11 057-0462-21 M 15570-20 057-0481-60 057-0502-60 057-0461-11 057-0462-21 M 15570-16 057-0481-60 057-0499-60 057-0461-11 057-0462-21 M 15570-16 057-0481-60 057-0499-60 057-0461-11 057-0462-21 M 15570-16 057-0481-60 057-0499-60 057-0463-12 057-0464-32 M 15570-16 057-0481-60 057-0499-60 057-0461-11 057-0462-21 M 15570-12 057-0481-60 057-0500-60 057-0461-11 057-0462-21 M 15570-12 057-0481-60 057-0500-60 057-0461-11 057-0462-21 Per coax size 16 - (A1010) / Pour coax taille 16 Mod. A1010. Male contact / Contact male - 025-0847-00 Female contact / Contact femelle - 025-0848-00 23 FDBA Notes www.deutsch.net DEUTSCH GLOBAL SALES NETWORK Contact your local sales office for further information: AUSTRALIA EP&DE 401a Lal Lal Street Ballarat, VIC 3350 AUSTRALIA Tel: +61 3 5331 4700 FRANCE Connecteurs Electriques Deutsch 17, rue Lavoisier BP 117 27091 Evreux Cedex 09 FRANCE Tel: +33 2 32 23 57 00 GERMANY Compagnie Deutsch GMBH Fraunhoferstrabe.11b 82152 Martinsried GERMANY Tel: +49 89 89 91 570 ISRAEL Deutsch ECM P.O. Box 5010 Ashkelon 78150 Southern Industrial Zone ISRAEL Tel: +972 8 671 0903 ITALY Deutsch Italia 9 Piazzale Lugano 20158 Milano ITALY Tel: +39 0239 322 240 JAPAN Deutsch Japan Ltd. 44-10 Ohyamakanai-cho Itabashi-ku Tokyo 173-0024 JAPAN Tel: +81 3 5995 5192 UNITED KINGDOM Deutsch UK Stanier Road St Leonards on Sea East Sussex TN38 9RF UK Tel: +44 (0) 1424 852722 USA Deutsch DAO 250 Eddie Jones Way Oceanside, CA 92054 USA Tel: +1 (760) 757-7500 Literature Code CC 004-41 F Edition June 2009 For more information, technical assistance or custom solutions: email ced@deutsch.net