Revised December 2005 LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A 3-Terminal 1A Positive Voltage Regulator General Description The LM78XX series of three terminal positive regulators are available in the TO-220 package and with several fixed output voltages, making them useful in a wide range of applications. Each type employs internal current limiting, thermal shut down and safe operating area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltages and currents. Features O Output Current up to 1A O Output Voltages of 5, 6, 8, 9, 12, 15, 18, 24 O Thermal Overload Protection O Short Circuit Protection O Output Transistor Safe Operating Area Protection Ordering Code: Product Number Output Voltage Tolerance Package Operating Temperature LM7805CT LM7806CT LM7808CT LM7809CT LM7810CT r4% 40qC - 125qC LM7812CT LM7815CT LM7818CT LM7824CT TO-220 LM7805ACT LM7806ACT LM7808ACT LM7809ACT LM7810ACT r2% 0qC - 125qC LM7812ACT LM7815ACT LM7818ACT LM7824ACT (c) 2005 Fairchild Semiconductor Corporation DS400018 www.fairchildsemi.com LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A 3-Terminal 1A Positive Voltage Regulator April 1999 LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Internal Block Diagram www.fairchildsemi.com 2 Parameter Symbol Value Unit VI 35 V VI 40 V RTJC 5 qC/W Input Voltage (for VO = 5V to 18V) (for VO = 24V) Thermal Resistance Junction-Cases (TO-220) Thermal Resistance Junction-Air (TO-220) RTJA 65 qC/W Operating Temperature Range TOPR 0 a 125 qC 40 a 125 qC 0 a 125 qC 65 a 150 qC LM78xx LM78xxA Storage Temperature Range TSTG Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. Electrical Characteristics (LM7805) (Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 10V, CI = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline Min Typ Max TJ = 25qC Conditions 4.8 5.0 5.2 5mA d IO d 1A, PO d 15W, VI = 7V to 20V 4.75 5.0 5.25 TJ = 25qC (Note 2) Load Regulation Quiescent Current Quiescent Current Change Regload IQ 'IQ V VO = 7V to 25V - 4.0 100 VI = 8V to 12V - 1.6 50.0 mV IO = 5mA to 1.5mA - 9.0 100 IO = 250mA to 750mA - 4.0 50.0 mV TJ = 25qC - 5.0 8.0 IO = 5mA to 1A - 0.03 0.5 VI = 7V to 25V - 0.3 1.3 mA mA IO = 5mA - 0.8 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 42.0 - PV/VO Ripple Rejection (Note 3) RR f = 120Hz, VO = 8V to 18V 62.0 73.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 3) Dropout Voltage 'VO/'T TJ = 25qC Unit VDROP Output Resistance (Note 3) rO f = 1KHz - 15.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 230 - mA Peak Current (Note 3) IPK TJ =25qC - 2.2 - A Note 2: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 3: These parameters, although guaranteed, are not 100% tested in production. 3 www.fairchildsemi.com LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Absolute Maximum Ratings(Note 1) LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Electrical Characteristics (LM7806) (Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 11V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline Min Typ Max TJ = 25qC Conditions 5.75 6.0 6.25 5mA d IO d 1A, PO d 15W, VI = 8.0V to 21V 5.7 6.0 6.3 VI = 8V to 25V - 5.0 120 VI = 9V to 13V - 1.5 60.0 TJ = 25qC (Note 4) Load Regulation Regload TJ = 25qC Quiescent Current Quiescent Current Change IQ 'IQ mV - 9.0 120 IO = 250mA to 750mA - 3.0 60.0 TJ = 25qC - 5.0 8.0 IO = 5mA to 1A - - 0.5 VI = 8V to 25V - - 1.3 mV mA mA IO = 5mA - 0.8 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 45.0 - PV/VO Ripple Rejection (Note 5) RR f = 120Hz, VO = 8V to 18V 62.0 73.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 5) Dropout Voltage 'VO/'T V IO = 5mA to 1.5mA (Note 4) Unit VDROP Output Resistance (Note 5) rO f = 1KHz - 19.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 250 - mA Peak Current (Note 5) IPK TJ =25qC - 2.2 - A Note 4: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 5: These parameters, although guaranteed, are not 100% tested in production. Electrical Characteristics (LM7808) (Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 14V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline Min Typ Max TJ = 25qC Conditions 7.7 8.0 8.3 5mA d IO d 1A, PO d 15W, VI = 10.5V to 23V 7.6 8.0 8.4 TJ = 25qC (Note 6) Load Regulation Regload TJ = 25qC (Note 6) Quiescent Current Quiescent Current Change IQ 'IQ V VI = 10.5V to 25V - 5.0 160 VI = 11.5V to 17V - 2.0 80.0 IO = 5mA to 1.5mA - 10.0 160 IO = 250mA to 750mA - 5.0 80.0 mV mV TJ = 25qC - 5.0 8.0 IO = 5mA to 1A - 0.05 0.5 VI = 10.5V to 25V - 0.5 1.0 mA mA IO = 5mA - 0.8 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 52.0 - PV/VO Ripple Rejection (Note 7) RR f = 120Hz, VO = 11.5V to 21.5V 56.0 73.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 7) Dropout Voltage 'VO/'T Unit VDROP Output Resistance (Note 7) rO f = 1KHz - 17.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 230 - mA Peak Current (Note 7) IPK TJ =25qC - 2.2 - A Note 6: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 7: These parameters, although guaranteed, are not 100% tested in production. www.fairchildsemi.com 4 (Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 15V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline Min Typ Max TJ = 25qC Conditions 8.65 9.0 9.35 5mA d IO d 1A, PO d 15W, VI = 11.5V to 24V 8.6 9.0 9.4 VI = 11.5V to 25V - 6.0 180 VI = 12V to 17V - 2.0 90.0 IO = 5mA to 1.5mA - 12.0 180 IO = 250mA to 750mA - 4.0 90.0 TJ = 25qC - 5.0 8.0 IO = 5mA to 1A - - 0.5 VI = 11.5V to 26V - - 1.3 TJ = 25qC (Note 8) Load Regulation Regload TJ = 25qC (Note 8) Quiescent Current Quiescent Current Change IQ 'IQ V mV mV mA mA IO = 5mA - 1.0 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 58.0 - PV/VO Ripple Rejection (Note 9) RR f = 120Hz, VO = 13V to 23V 56.0 71.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 9) Dropout Voltage 'VO/'T Unit VDROP Output Resistance (Note 9) rO f = 1KHz - 17.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 250 - mA Peak Current (Note 9) IPK TJ =25qC - 2.2 - A Note 8: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 9: These parameters, although guaranteed, are not 100% tested in production. Electrical Characteristics (LM7810) (Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 16V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline Min Typ Max TJ = 25qC Conditions 9.6 10.0 10.4 5mA d IO d 1A, PO d 15W, VI = 12.5V to 25V 9.5 10.0 10.5 VI = 12.5V to 25V - 10.0 200 VI = 13V to 25V - 3.0 100 IO = 5mA to 1.5mA - 12.0 200 IO = 250mA to 750mA - 4.0 400 TJ = 25qC - 5.1 8.0 IO = 5mA to 1A - - 0.5 VI = 12.5V to 29V - - 1.0 TJ = 25qC (Note 10) Load Regulation Regload TJ = 25qC (Note 10) Quiescent Current Quiescent Current Change IQ 'IQ V mV mV mA mA IO = 5mA - 1.0 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 58.0 - PV/VO Ripple Rejection (Note 11) RR f = 120Hz, VO = 13V to 23V 56.0 71.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 11) Dropout Voltage 'VO/'T Unit VDROP Output Resistance (Note 11) rO f = 1KHz - 17.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 250 - mA Peak Current (Note 11) IPK TJ =25qC - 2.2 - A Note 10: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 11: These parameters, although guaranteed, are not 100% tested in production. 5 www.fairchildsemi.com LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Electrical Characteristics (LM7809) LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Electrical Characteristics (LM7812) (Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 19V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline Min Typ Max TJ = 25qC Conditions 11.5 12.0 12.5 5mA d IO d 1A, PO d 15W, VI = 14.5V to 27V 11.4 12.0 12.6 VI = 14.5V to 30V - 10.0 240 VI = 16V to 22V - 3.0 120 IO = 5mA to 1.5mA - 11.0 240 IO = 250mA to 750mA - 5.0 120 TJ = 25qC (Note 12) Load Regulation Regload TJ = 25qC (Note 12) Quiescent Current Quiescent Current Change IQ 'IQ V mV mV TJ = 25qC - 5.1 8.0 IO = 5mA to 1A - 0.1 0.5 VI = 14.5V to 30V - 0.5 1.0 mA mA IO = 5mA - 1.0 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 76.0 - PV/VO Ripple Rejection (Note 13) RR f = 120Hz, VI = 15V to 25V 55.0 71.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 13) Dropout Voltage 'VO/'T Unit VDROP Output Resistance (Note 13) rO f = 1KHz - 18.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 230 - mA Peak Current (Note 13) IPK TJ =25qC - 2.2 - A Note 12: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 13: These parameters, although guaranteed, are not 100% tested in production. Electrical Characteristics (LM7815) (Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 23V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline Min Typ Max TJ = 25qC Conditions 14.4 15.0 15.6 5mA d IO d 1A, PO d 15W, VI = 17.5V to 30V 14.25 15.0 15.75 VI = 17.5V to 30V - 11.0 300 VI = 20V to 26V - 3.0 150 IO = 5mA to 1.5mA - 12.0 300 IO = 250mA to 750mA - 4.0 150 TJ = 25qC - 5.2 8.0 IO = 5mA to 1A - - 0.5 VI = 17.5V to 30V - - 1.0 TJ = 25qC (Note 14) Load Regulation Regload TJ = 25qC (Note 14) Quiescent Current Quiescent Current Change IQ 'IQ V mV mV mA mA IO = 5mA - 1.0 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 90.0 - PV/VO Ripple Rejection (Note 15) RR f = 120Hz, VI = 18.5V to 28.5V 54.0 70.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 15) Dropout Voltage 'VO/'T Unit VDROP Output Resistance (Note 15) rO f = 1KHz - 19.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 250 - mA Peak Current (Note 15) IPK TJ =25qC - 2.2 - A Note 14: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 15: These parameters, although guaranteed, are not 100% tested in production. www.fairchildsemi.com 6 (Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 27V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline Min Typ Max TJ = 25qC Conditions 17.3 18.0 18.7 5mA d IO d 1A, PO d 15W, VI = 21V to 33V 17.1 18.0 18.9 VI = 21V to 33V - 15.0 360 VI = 24V to 30V - 5.0 180 IO = 5mA to 1.5mA - 15.0 360 IO = 250mA to 750mA - 5.0 180 TJ = 25qC - 5.2 8.0 IO = 5mA to 1A - - 0.5 VI = 21V to 33V - - 1.0 TJ = 25qC (Note 12) Load Regulation Regload TJ = 25qC (Note 12) Quiescent Current Quiescent Current Change IQ 'IQ V mV mV mA mA IO = 5mA - 1.0 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 110 - PV/VO Ripple Rejection (Note 17) RR f = 120Hz, VI = 22V to 32V 53.0 69.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 17) Dropout Voltage 'VO/'T Unit VDROP Output Resistance (Note 17) rO f = 1KHz - 22.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 250 - mA Peak Current (Note 17) IPK TJ =25qC - 2.2 - A Note 16: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 17: These parameters, although guaranteed, are not 100% tested in production. Electrical Characteristics (LM7824) (Refer to the test circuits. 40qC TJ 125qC, IO = 500mA, VI = 33V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline Min Typ Max TJ = 25qC Conditions 23.0 24.0 25.0 5mA d IO d 1A, PO d 15W, VI = 27V to 38V 22.8 24.0 25.25 VI = 27V to 38V - 17.0 480 VI = 30V to 36V - 6.0 240 IO = 5mA to 1.5mA - 15.0 480 IO = 250mA to 750mA - 5.0 240 TJ = 25qC (Note 18) Load Regulation Regload TJ = 25qC (Note 18) Quiescent Current Quiescent Current Change IQ 'IQ V mV mV TJ = 25qC - 5.2 8.0 IO = 5mA to 1A - 0.1 0.5 VI = 27V to 38V - 0.5 1.0 mA mA IO = 5mA - 1.5 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 60.0 - PV/VO Ripple Rejection (Note 19) RR f = 120Hz, VI = 28V to 38V 50.0 67.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 19) Dropout Voltage 'VO/'T Unit VDROP Output Resistance (Note 19) rO f = 1KHz - 28.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 230 - mA Peak Current (Note 19) IPK TJ =25qC - 2.2 - A Note 18: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 19: These parameters, although guaranteed, are not 100% tested in production. 7 www.fairchildsemi.com LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Electrical Characteristics (LM7818) LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Electrical Characteristics (LM7805A) (Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 10V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline (Note 20) Min Typ Max TJ = 25qC Conditions 4.9 5.0 5.1 IO = 5mA to 1A, PO d 15W, VI = 7.5V to 20V 4.8 5.0` 5.2 VI = 7.5V to 25V, IO = 500mA - 5.0 50.0 VI = 8V to 12V - 3.0 50.0 - 5.0 50.0 TJ = 25qC Regload (Note 20) Quiescent Current Quiescent Current Change IQ 'IQ - 1.5 25.0 TJ = 25qC, IO = 5mA to 1.5mA - 9.0 100 IO = 5mA to 1mA - 9.0 100 IO = 250mA to 750mA - 4.0 50.0 TJ = 25qC - 5.0 6.0 IO = 5mA to 1A - - 0.5 VI = 8V to 25V, IO = 500mA - - 0.8 VI = 7.5V to 20V, TJ = 25qC - - 0.8 mV mA mA IO = 5mA - 0.8 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 10.0 - PV/VO Ripple Rejection (Note 21) RR f = 120Hz, IO = 500mA, VI = 8V to 18V - 68.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 21) Dropout Voltage 'VO/'T V mV VI = 7.3V to 20V VI = 8V to 12V Load Regulation Unit VDROP Output Resistance (Note 21) rO f = 1KHz - 17.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 250 - mA Peak Current (Note 21) IPK TJ =25qC - 2.2 - A Note 20: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 21: These parameters, although guaranteed, are not 100% tested in production. www.fairchildsemi.com 8 (Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 11V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline (Note 22) Min Typ Max TJ = 25qC Conditions 5.58 6.0 6.12 IO = 5mA to 1A, PO d 15W, VI = 8.6V to 21V 5.76 6.0 6.24 VI = 8.6V to 25V, IO = 500mA - 5.0 60.0 VI = 9V to 13V - 3.0 60.0 - 5.0 60.0 TJ = 25qC Regload (Note 22) Quiescent Current Quiescent Current Change IQ 'IQ - 1.5 30.0 TJ = 25qC, IO = 5mA to 1.5mA - 9.0 100 IO = 5mA to 1mA - 4.0 100 IO = 250mA to 750mA - 5.0 50.0 TJ = 25qC - 4.3 6.0 IO = 5mA to 1A - - 0.5 VI = 19V to 25V, IO = 500mA - - 0.8 VI = 8.5V to 21V, TJ = 25qC - - 0.8 mV mA mA IO = 5mA - 0.8 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 10.0 - PV/VO Ripple Rejection (Note 23) RR f = 120Hz, IO = 500mA, VI = 9V to 19V - 65.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 23) Dropout Voltage 'VO/'T V mV VI = 8.3V to 21V VI = 9V to 13V Load Regulation Unit VDROP Output Resistance (Note 23) rO f = 1KHz - 17.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 250 - mA Peak Current (Note 23) IPK TJ =25qC - 2.2 - A Note 22: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 23: These parameters, although guaranteed, are not 100% tested in production. 9 www.fairchildsemi.com LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Electrical Characteristics (LM7806A) LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Electrical Characteristics (LM7808A) (Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 14V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline (Note 24) Min Typ Max TJ = 25qC Conditions 7.84 8.0 8.16 IO = 5mA to 1A, PO d 15W, VI = 10.6V to 23V 7.7 8.0 8.3 VI = 10.6V to 25V, IO = 500mA - 6.0 80.0 VI = 11V to 17V - 3.0 80.0 - 6.0 80.0 TJ = 25qC Regload (Note 24) Quiescent Current Quiescent Current Change IQ 'IQ - 2.0 40.0 TJ = 25qC, IO = 5mA to 1.5mA - 12.0 100 IO = 5mA to 1mA - 12.0 100 IO = 250mA to 750mA - 5.0 50.0 TJ = 25qC - 5.0 6.0 IO = 5mA to 1A - - 0.5 VI = 11V to 25V, IO = 500mA - - 0.8 VI = 10.6V to 23V, TJ = 25qC - - 0.8 mV mA mA IO = 5mA - 0.8 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 10.0 - PV/VO Ripple Rejection (Note 25) RR f = 120Hz, IO = 500mA, VI = 11.5V to 21.5V - 62.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 25) Dropout Voltage 'VO/'T V mV VI = 10.4V to 23V VI = 11V to 17V Load Regulation Unit VDROP Output Resistance (Note 25) rO f = 1KHz - 18.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 250 - mA Peak Current (Note 25) IPK TJ =25qC - 2.2 - A Note 24: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 25: These parameters, although guaranteed, are not 100% tested in production. www.fairchildsemi.com 10 (Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 15V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline (Note 26) Min Typ Max TJ = 25qC Conditions 8.82 9.0 9.16 IO = 5mA to 1A, PO d 15W, VI = 11.2V to 24V 8.65 9.0 9.35 VI = 11.7V to 25V, IO = 500mA - 6.0 90.0 VI = 12.5V to 19V - 4.0 45.0 - 6.0 90.0 TJ = 25qC Regload (Note 26) Quiescent Current Quiescent Current Change IQ 'IQ - 2.0 45.0 TJ = 25qC, IO = 5mA to 1.0mA - 12.0 100 IO = 5mA to 1mA - 12.0 100 IO = 250mA to 750mA - 5.0 50.0 TJ = 25qC - 5.0 6.0 IO = 5mA to 1A - - 0.5 VI = 12V to 25V, IO = 500mA - - 0.8 VI = 11.7V to 25V, TJ = 25qC - - 0.8 mV mA mA IO = 5mA - 1.0 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 10.0 - PV/VO Ripple Rejection (Note 27) RR f = 120Hz, IO = 500mA, VI = 12V to 22V - 62.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 27) Dropout Voltage 'VO/'T V mV VI = 11.5V to 24V VI = 12.5V to 19V Load Regulation Units VDROP Output Resistance (Note 27) rO f = 1KHz - 17.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 250 - mA Peak Current (Note 27) IPK TJ =25qC - 2.2 - A Note 26: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 27: These parameters, although guaranteed, are not 100% tested in production. 11 www.fairchildsemi.com LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Electrical Characteristics (LM7809A) LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Electrical Characteristics (LM7810A) (Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 16V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline (Note 28) Min Typ Max TJ = 25qC Conditions 9.8 10.0 10.2 IO = 5mA to 1A, PO d 15W, VI = 12.8V to 25V 9.6 10.0 10.4 VI = 12.8V to 26V, IO = 500mA - 8.0 100 VI = 13V to 20V - 4.0 50.0 - 8.0 100 TJ = 25qC Regload (Note 28) Quiescent Current Quiescent Current Change IQ 'IQ - 3.0 50.0 TJ = 25qC, IO = 5mA to 1.5mA - 12.0 100 IO = 5mA to 1mA - 12.0 100 IO = 250mA to 750mA - 5.0 50.0 TJ = 25qC - 5.0 6.0 IO = 5mA to 1A - - 0.5 VI = 12.8V to 25V, IO = 500mA - - 0.8 VI = 13V to 26V, TJ = 25qC - - 0.5 mV mA mA IO = 5mA - 1.0 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 10.0 - PV/VO Ripple Rejection (Note 29) RR f = 120Hz, IO = 500mA, VI = 14V to 24V - 62.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 29) Dropout Voltage 'VO/'T V mV VI = 12.5V to 25V VI = 13V to 20V Load Regulation Units VDROP Output Resistance (Note 29) rO f = 1KHz - 17.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 250 - mA Peak Current (Note 29) IPK TJ =25qC - 2.2 - A Note 28: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 29: These parameters, although guaranteed, are not 100% tested in production. www.fairchildsemi.com 12 (Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 19V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline (Note 30) Min Typ Max TJ = 25qC Conditions 11.75 12.0 12.25 IO = 5mA to 1A, PO d 15W, VI = 14.8V to 27V 11.5 12.0 12.5 VI = 14.8V to 30V, IO = 500mA - 10.0 120 VI = 16V to 22V - 4.0 120 - 10.0 120 TJ = 25qC Regload (Note 30) Quiescent Current Quiescent Current Change IQ 'IQ - 3.0 60.0 TJ = 25qC, IO = 5mA to 1.5mA - 12.0 100 IO = 5mA to 1mA - 12.0 100 IO = 250mA to 750mA - 5.0 50.0 TJ = 25qC - 5.1 6.0 IO = 5mA to 1A - - 0.5 VI = 14V to 27V, IO = 500mA - - 0.8 VI = 15V to 30V, TJ = 25qC - - 0.8 mV mA mA IO = 5mA - 1.0 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 10.0 - PV/VO Ripple Rejection (Note 31) RR f = 120Hz, IO = 500mA, VI = 14V to 24V - 60.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 31) Dropout Voltage 'VO/'T V mV VI = 14.5V to 27V VI = 16V to 22V Load Regulation Units VDROP Output Resistance (Note 31) rO f = 1KHz - 18.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 250 - mA Peak Current (Note 31) IPK TJ =25qC - 2.2 - A Note 30: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 31: These parameters, although guaranteed, are not 100% tested in production. 13 www.fairchildsemi.com LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Electrical Characteristics (LM7812A) LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Electrical Characteristics (LM7815A) (Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 23V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline (Note 32) Min Typ Max TJ = 25qC Conditions 14.75 15.0 15.3 IO = 5mA to 1A, PO d 15W, VI = 17.7V to 30V 14.4 15.0 15.6 VI = 17.4V to 30V, IO = 500mA - 10.0 150 VI = 20V to 26V - 5.0 150 - 11.0 150 TJ = 25qC Regload (Note 32) Quiescent Current Quiescent Current Change IQ 'IQ - 3.0 75.0 TJ = 25qC, IO = 5mA to 1.5mA - 12.0 100 IO = 5mA to 1mA - 12.0 100 IO = 250mA to 750mA - 5.0 50.0 TJ = 25qC - 5.2 6.0 IO = 5mA to 1A - - 0.5 VI = 17.5V to 30V, IO = 500mA - - 0.8 VI = 17.5V to 30V, TJ = 25qC - - 0.8 mV mA mA IO = 5mA - 1.0 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 10.0 - PV/VO Ripple Rejection (Note 33) RR f = 120Hz, IO = 500mA, VI = 18.5V to 28.5V - 58.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 33) Dropout Voltage 'VO/'T V mV VI = 17.5V to 30V VI = 20V to 26V Load Regulation Units VDROP Output Resistance (Note 33) rO f = 1KHz - 19.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 250 - mA Peak Current (Note 33) IPK TJ =25qC - 2.2 - A Note 32: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 33: These parameters, although guaranteed, are not 100% tested in production. www.fairchildsemi.com 14 (Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 27V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline (Note 34) Min Typ Max TJ = 25qC Conditions 17.64 18.0 18.36 IO = 5mA to 1A, PO d 15W, VI = 21V to 33V 17.3 18.0 18.7 VI = 21V to 33V, IO = 500mA - 15.0 180 VI = 21V to 33V - 5.0 180 - 15.0 180 TJ = 25qC Regload (Note 34) Quiescent Current Quiescent Current Change IQ 'IQ - 5.0 90.0 TJ = 25qC, IO = 5mA to 1.5mA - 15.0 100 IO = 5mA to 1mA - 15.0 100 IO = 250mA to 750mA - 7.0 50.0 TJ = 25qC - 5.2 6.0 IO = 5mA to 1A - - 0.5 VI = 12V to 33V, IO = 500mA - - 0.8 VI = 12V to 33V, TJ = 25qC - - 0.8 mV mA mA IO = 5mA - 1.0 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 10.0 - PV/VO Ripple Rejection (Note 35) RR f = 120Hz, IO = 500mA, VI = 22V to 32V - 57.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 35) Dropout Voltage 'VO/'T V mV VI = 20.6V to 33V VI = 24V to 30V Load Regulation Units VDROP Output Resistance (Note 35) rO f = 1KHz - 19.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 250 - mA Peak Current (Note 35) IPK TJ =25qC - 2.2 - A Note 34: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 35: These parameters, although guaranteed, are not 100% tested in production. 15 www.fairchildsemi.com LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Electrical Characteristics (LM7818A) LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Electrical Characteristics (LM7824A) (Refer to the test circuits. 0qC TJ 125qC, IO = 1A, VI = 33V, CI = 0.33P F, CO = 0.1P F, unless otherwise specified) Parameter Output Voltage Line Regulation Symbol VO Regline (Note 36) Min Typ Max TJ = 25qC Conditions 23.5 24.0 24.5 IO = 5mA to 1A, PO d 15W, VI = 27.3V to 38V 23.0 24.0 25.0 VI = 27V to 38V, IO = 500mA - 18.0 240 VI = 21V to 33V - 6.0 240 - 18.0 240 TJ = 25qC Regload (Note 36) Quiescent Current Quiescent Current Change IQ 'IQ - 6.0 120 - 15.0 100 IO = 5mA to 1mA - 15.0 100 IO = 250mA to 750mA - 7.0 50.0 TJ = 25qC - 5.2 6.0 IO = 5mA to 1A - - 0.5 VI = 27.3V to 38V, IO = 500mA - - 0.8 VI = 27.3V to 38V, TJ = 25qC - - 0.8 TJ = 25qC, IO = 5mA to 1.5mA mV mA mA IO = 5mA - 1.5 - mV/qC Output Noise Voltage VN f = 10Hz to 100KHz, TA = 25qC - 10.0 - PV/VO Ripple Rejection (Note 37) RR f = 120Hz, IO = 500mA, VI = 28V to 38V - 54.0 - dB IO = 1A, TJ = 25qC - 2.0 - V Output Voltage Drift (Note 37) Dropout Voltage 'VO/'T V mV VI = 26.7V to 38V VI = 30V to 36V Load Regulation Units VDROP Output Resistance (Note 37) rO f = 1KHz - 20.0 - m: Short Circuit Current ISC VI = 35V, TA = 25qC - 250 - mA Peak Current (Note 37) IPK TJ =25qC - 2.2 - A Note 36: Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty is used. Note 37: These parameters, although guaranteed, are not 100% tested in production. www.fairchildsemi.com 16 FIGURE 1. Quiescent Current FIGURE 2. Peak Output Current FIGURE 3. Output Voltage FIGURE 4. Quiescent Current www.fairchildsemi.com 17 LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Typical Performance Characteristics LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Typical Applications FIGURE 5. DC Parameters FIGURE 6. Load Regulation FIGURE 7. Ripple Rejection FIGURE 8. Fixed Output Regulator www.fairchildsemi.com 18 FIGURE 9. Note: To specify an output voltage, substitute voltage value for "XX". A common ground is required between the Input and the Output voltage. The input voltage must remain typically 2.0V above the output voltage even during the low point on the input ripple voltage. Note: CI is required if regulator is located an appreciable distance from the power supply filter. Note: CO improves stability and transient response. IRI t 5 IQ VO = VXX (1 R2 / R1) IQ R2 FIGURE 10. Circuit for Increasing Output Voltage IRI t 5 IQ VO = VXX (1 R2 / R1) IQ R2 FIGURE 11. Adjustable Output Regulator (7V to 30V) 19 www.fairchildsemi.com LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Typical Applications (continued) LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Typical Applications (continued) FIGURE 12. High Current Voltage Regulator FIGURE 13. High Output Current with Short Circuit Protection FIGURE 14. Tracking Voltage Regulator www.fairchildsemi.com 20 LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Typical Applications (continued) FIGURE 15. Split Power Supply (r15V - 1A) FIGURE 16. Negative Output Voltage Circuit FIGURE 17. Switching Regulator 21 www.fairchildsemi.com LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A Physical Dimensions inches (millimeters) unless otherwise noted Package Number TO-220 www.fairchildsemi.com 22 FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION As used herein: provided in the labeling, can be reasonably expected to result in significant injury to the user. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or 2. A critical component is any component of a life support (b) support or sustain life, or (c) whose failure to perform device or system whose failure to perform can be reasonwhen properly used in accordance with instructions for use ably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. 23 www.fairchildsemi.com LM7805 * LM7806 * LM7808 * LM7809 * LM7810 * LM7812 * LM7815 * LM7818 * LM7824 * LM7805A * LM7806A * LM7808A *LM7809A * LM7810A * LM7812A * LM7815A * LM7818A * LM7824A 3-Terminal 1A Positive Voltage Regulator DISCLAIMER