8 7 6 2 2 1 F 3 3 2 4 2 1 2-#20 3 3-#20 1 4 5 3 4 5 2 3 5 1 1 6 4-#22 5-#26 CONTACT ARRANGEMENTS PANEL CONNECTOR REAR (WIRING SIDE) VIEW 4 3 2 4 SPECIFICATIONS: 2 MECHANICAL Life:600 cycles minimum Vibration: Mil-Std 202G Method 201A Hex Nut Tongue: 5-6 in-lb 5 1 6-#26 7 7-#26 6 0.375 MIN. 9.53 Strip cable end and conductors as shown. E 0.1880.015 4.780.38 EN2 PANEL-MOUNT CONNECTOR Connector Type: C - Cord P - Panel* L - In-Line** Packaging Options: Leave blank for Bulk K - Kit (one unit/bag) # of Contacts: 2-3 for #20 4 for #22 5-7 for #26 Coupling Ring option: Leave blank for Ribbed W - Winged Gender: M - Male F - Female SOLDER OR CRIMP ENVIRONMENTAL Operating Temperature Limits:-40C to +85C (-40F to +185F), see Current Rating Table. Moisture Resistance: Mil-Std 202G Method 106G Insulation Resistance: Mil-Std 202G Method 302 Thermal Shock: Mil-Std 202G Method 107G Salt Atmosphere (Corrosion): Mil-Std 202G Method 101E Wearthetight Ratings: IP16, IP18, IP66, IP67, IP68 per IEC60529 NEMA 250 (6P), CFR 46 Part 110.20 EN2 CABLE D Soldering or crimping conductors to contacts is recommended before insertion into connector. If crimping, use hand or pneumatic crimp tool with crimp positioner per contact size. If soldering after contacts are inserted in the connector, limit exposure of contacts to soldering iron temperature to 4 sec. maximum. Soldering iron temperature should not exceed 650F (343C). Grommet Code - Cable O.D. Range: DC - Daisy Chain (all 3 sizes) G1 - 0.100-0.140 (2.5-3.6) G2 - 0.140-0.180 (3.6-4.6) G3 - 0.180-0.220 (4.6-5.6) Contacts 2 #20 3 #20 0.250 MAX PANEL THICKNESS 6.35 4 #22 5-7 #26 Wire (awg) 20 22 24 26 20 22 24 26 20 22 24 26 26 28 30 Current Rating (A) at Operating Temperature (C) 45C max. 55C max. 65C max. 75C max. 85C max. 7 6 5 4 3.5 5.5 5 4 3 2.5 5.5 5 4 3 2.5 4 3.5 2.5 2 1 6.5 5.5 4.5 3.5 2 5 4.5 3.5 3 1.5 5 4.5 3.5 3 1.5 3 2.5 2 1.5 0.5 5 4.5 3.5 3 1.5 4.5 4 3 2 1 4.5 4 3 2 1 3 2.5 2 1.5 0.5 3 2.5 2 1.5 1 2.5 2 1.5 1 0.5 2 1.5 1 0.5 0.5 C D C SOCKET CONTACTS (FEMALE) PIN CONTACTS (MALE) Insert wired contacts into connector housing using an insertion tool and per contacts arrangements. Align and install connector into panel cut-out. Tighten hex nut 5 -6 in-lb. 0.790 20.07 0.588 14.94 0.625 15.88 0.200 [5.1] TYP 0.15 [3.8] FOR 5-7 #26 CONTACTS 0.20 [5.1] TYP 0.15 [3.8] FOR 5-7 #26 CONTACTS 0.401 10.19 0.620 15.75 0.430 10.92 0.716 18.18 B 0.202 [5.1] BEFORE PANEL MOUNTING, REDUCED BY 0.010 [0.25] AFTER MOUNTING PC TAIL TYPE CONTACTS SOLDER OR CRIMP TYPE CONTACTS 0.107 2.72 PIN 1 INDICATOR TOOL TOOL TYPE EN3CR HAND CRIMP TOOL EN3CRAUTO PNEUMATIC CRIMP TOOL HAND CRIMP TOOL LARGE FRAME EN2CRL EN2CRAUTOL PNEUMATIC CRIMP TOOL LARGE FRAME EN3INS20 EN3INS26 CONTACT INSERTION/EXTRUCTION 8 POSITIONER CONTACT SIZE WIRE SIZES EN2POS20 EN3POS26 EN2POS20 EN3POS26 20 and 22 26 20 and 22 26 20 and 22 AWG 26, 28, and 30 AWG 20 and 22 AWG 26, 28, and 30 AWG EN2POS20L 20 and 22 20, 22, 24, and 26 AWG --- 7 20 and 22 26 CUSTOMER DRAWING THIS DRAWING DESCRIBES A DESIGN CONSIDERED PROPRIETARY IN NATURE, DEVELOPED AND MANUFACTURED BY SWITCHCRAFT INC. AND IS RELEASED ON A CONFIDENTIAL BASIS FOR IDENTIFICATION PURPOSES ONLY. UNLESS OTHERWISE SPECIFIED SPECS UPDATED 10/03/13 PNK WIDTH MULT - TWO PLACE DECIMALS 0.02 - THREE PLACE DECIMALS 0.005 09/20/12 PNK SRC TOOLS REVISED 05/14/12 PNK * DATE DRAWN BY CHKD APVD 0A PRELIMINARY 02/09/12 PNK * 02/09/12 PNK PNK 02/09/12 SRC 02/09/12 REV ECO NUMBER 4 APVD 1.5:1 NAME DO NOT SCALE DRAWING SolidWorks CAD File A SPEC No. SPECS UPDATED BY TEMPER SCALE 0B DATE LBS/M MATERIAL SPEC No. FIRST USED ON 0C REVISIONS 5 SRC SIZE FINISH 1. ALL DIMENSIONS IN INCHES 0D --- 6 B RECOMMENDED PANEL CUT-OUT 0.003 [0.08] 0.140 3.56 ALL DIMENSIONS FOR REFERENCE ONLY A E MATERIAL Connector Housing ----- Thermoplastic, black Hex Nut: ------------------- Thermoplastic, black Coupling Ring ------------ Thermoplastic, black Cable Clamp -------------- Thermoplastic, black Handle (back-shell) ----- Thermoplastic, black Insulator ------------------- Elastomer, black Seal Grommet ----------- Elastomer, black Contacts ------------------- Copper Alloy, plated Contact Size: Contact Style: 20 - #20 Leave blank for Solder or Crimp 22 - #22 P - PC tail (Panel connectors only) 26 - #26 * for mating Cord connectors refer to EN2C SERIES drawing. ** Mating In-Line connectors not currently available. CONTACTS F ELECTRICAL Voltage Rating: 250 V AC/DC for 2 contact arrangement 125 V AC/DC for 3-7 contact arrangements Insulation Resistance: 1000 m minimum Contact Resistance: 10 m maximum Current Rating: Refer to Current Rating Table PART NUMBER SCHEME: EN2 PANEL CONNECTOR FIELD ASSEMBLY INSTRUCTIONS: 1 EN2P SERIES CONNECTORS, RoHS C SHEET PART No. 1 OF EN2P SERIES 2 REV 0D 8 7 6 5 0.099 2.51 0.114 2.90 3 2 1 0.049 1.25 2 0.057 1.45 F 4 0.200 5.08 TYP 0.057 1.45 1 0.029 0.72 0.040 1.02 TYP 2 1 3 E 0.100 2.54 2 and 3-#20 PIN ARRANGEMENTS (0.046 [1.17] RECOMMENDED PCB HOLE SIZE) 3-#20 2-#20 E 0.200 5.08 TYP 0.050 1.27 3 F 2 D D 0.100 2.54 4 0.040 1.02 TYP 0.050 1.27 1 4-#22 PIN ARRANGEMENT (0.046 [1.17] RECOMMENDED PCB HOLE SIZE) 4-#22 C 30 TYP 30 TYP 3 4 3 4 0.164 4.17 5 2 B 1 C 30 TYP 3 4 0.164 4.17 0.164 4.17 5 2 6 1 5 2 6 0.020 0.51 TYP 1 7 5-#26 0.150 3.81 TYP 6-#26 B 5, 6, and 7-#26 PIN ARRANGEMENTS (0.026 [0.66] RECOMMENDED PCB HOLE SIZE) 7-#26 CUSTOMER DRAWING A THIS DRAWING DESCRIBES A DESIGN CONSIDERED PROPRIETARY IN NATURE, DEVELOPED AND MANUFACTURED BY SWITCHCRAFT INC. AND IS RELEASED ON A CONFIDENTIAL BASIS FOR IDENTIFICATION PURPOSES ONLY. CONTACT ARRANGEMENTS PANEL CONNECTOR FRONT VIEW (PCB COMPONENT SIDE) (RECOMMENDED PCB HOLE LAYOUT WITHIN 0.001 [0.025]) UNLESS OTHERWISE SPECIFIED SPECS UPDATED REV ECO NUMBER 10/03/13 PNK DATE REVISIONS 8 7 6 5 4 BY - TWO PLACE DECIMALS 0.02 MULT - THREE PLACE DECIMALS 0.005 TEMPER A SPEC No. SCALE 1.5:1 DATE DRAWN BY CHKD APVD 02/09/12 PNK PNK 02/09/12 SRC 02/09/12 NAME DO NOT SCALE DRAWING SolidWorks CAD File LBS/M MATERIAL SPEC No. FIRST USED ON SRC APVD WIDTH FINISH 1. ALL DIMENSIONS IN INCHES OD SIZE EN2P SERIES CONNECTORS, RoHS C SHEET PART No. 2 OF EN2P SERIES 2 REV 0D