F-212 FTE-155-01-G-DV FTE-130-01-G-DV-ES FTE-120-01-G-DV-A (0,80mm) .0315" FTE SERIES SMT MICRO HEADER SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?FTE CURRENT RATING -P OPTION Surface Mount -TR OPTION -ES OPTION Optional End Shrouds for blind mating APPLICATION SPECIFIC OPTION (0,80mm) .0315" micro pitch End shrouds with board locks and Gold flash plating available. Call Samtec. Processing: Lead-Free Solderable: Yes -DV Lead Coplanarity: (0,10mm) .004" max -DH Lead Coplanarity: (0,10mm) .004" max (05-25) (0,15mm) .006" max (26-50) Low profile (1,70mm) .067" OPTIONS Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Au over 50" (1,27m) Ni Operating Temp Range: -55C to +125C RoHS Compliant: Yes AMBIENT FTE/CLE TEMP 3.1A 20C 2.8A 40C 2.4A 60C 1.6A 95C 6 POSITIONS (2x3) POWERED Choice of post heights Mates with: CLE NO. PINS 1 PER ROW FTE LEAD STYLE Specify LEAD STYLE from chart 05 thru 90 02 No. of positions x (0,80) .0315 (0,80) .0315 PLATING OPTION TAIL OPTION FLEX-SHROUD OPTIONS -G -DV Style -01 -DV only (11 pins/row min.) = 10" (0,25m) Gold on post, Gold flash on balance 180 (3,05) .120 (1,20) .047 01 179 = Dual Horizontal (50 pos. max.) A -01 (1,90) .075 -02 (4,45) .175 -03 (3,05) .120 -EC = End Shroud with Locking Clips (Manual placement required) -EP = End Shroud with Guide Posts A (5,08) .200 -K = (2,50mm) .098" DIA Polyimide Film Pick & Place Pad (-DH only) Z -P -ES (1,57) .062 = Plastic Pick & Place Pad (8 pos. min.) -DV only -EP (4,11) .162 (5,51) .217 (2,29) .090 -DH OPTION (5,08) .200 x (3,18) .125 (4,17) .164 (3,18) (4,09) .125 .161 A (1,38) .055 (1,70) .067 (Shrouded options removed for clarity) = End Shroud -A = Alignment Pin (5 pos. min.) Metal or plastic at Samtec discretion (-DV only) OPTION (0,30) .012 SQ Note: Some lengths, styles and options are non-standard, non-returnable. -ES -DH LEAD STYLE -EC No. of positions x (0,80) .0315 + Z = Dual Vertical OTHER OPTION (4,57) .180 WWW.SAMTEC.COM -ES OPTION -P OPTION -TR = Tape & Reel Packaging