S3AB – S3MB 1 of 4 © 2006 Won-Top Electronics
Pb
S3AB – S3MB
3.0A SURFACE MO UNT GLASS PASSIVATED STANDARD DIODE
Features
! Glass Passivated Die Construction
! Ideally Suited for Automatic Assembly B
! Low Forward Voltage Drop
! Surge Overload Rating to 100A Peak D
! Low Power Loss A
! Built-in Strain Relief F
! Plastic Case Material has UL Flammability
Classification Rating 94V-O C H G
E
Mechanical Data
! Case: SMB/DO-214AA, Molded Plastic
! Terminals: Solder Plated, Solderable
per MIL-STD-750, Method 2026
! Polarity: Cathode Band or Cathode Notch
! Marking: Type Number
! Weight: 0.093 grams (approx.)
! Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 4
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Characteristic Symbol S3AB S3BB S3DB S3GB S3JB S3KB S3MB Unit
Peak Repetit i ve Revers e Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current @TL = 75°C IO3.0 A
Non-Repetiti ve P eak Forward Surge Current
8.3ms Si ngl e half sine-wave superimposed on
rated load (JEDE C Method) IFSM 100 A
Forward Voltage @IF = 3.0A VFM 1.20 V
Peak Reverse Current @TA = 25°C
At Rated DC Blocking Voltage @TA = 125°C IRM 5.0
250 µA
Reverse Recovery Time (Note 1) trr 2.5 µS
Typi cal Junction Capacitanc e (Note 2) Cj60 pF
Typical Thermal Resistance (Note 3) RJL 13 °C/W
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C
Note: 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A,
2. Measured at 1.0 MHz and applied reverse volt age of 4.0 V DC.
3. Mounted on P.C. Board with 8.0mm2 land area.
WTE
POWER SEMICONDUCTORS
SMB/DO-214AA
Dim Min Max
A3.30 3.94
B4.06 4.70
C1.91 2.11
D0.152 0.305
E5.08 5.59
F2.13 2.44
G0.051 0.203
H0.76 1.27
All Dimensions in mm
S3AB – S3MB 2 of 4 © 2006 Won-Top Electronics
0
1.5
T,LEAD TEMPERATURE(ºC)
Fig. 1 Forward Current Derating Curve
L
I , AVERAGE FORWARD CURRENT (A)
AV
0.5
1.0
2.0
2.5
25 50 75 100 125 150
3.0 Resistive or
Inductive Load
0.01
0.1
1.0
10
100
1000
0 20 40 60 80 100 120 140
I,IN
S
TANTANEOUS REVERSE CURRENT (µA)
R
PERCENT OF RATED PEAK REVERSE VOLTAGE (%
)
Fig. 4 Typical Reverse Characteristics
T = 125°C
j
T = 25°C
j
0
20
40
60
110 10
0
I , PEAK F
O
RWARD SURGE CURRENT (A)
FSM
NUMBEROFCYCLES AT 60 Hz
Fig.3 Forward Surge Current Derating Curve
Single Half-Sine-Wave
JEDEC Method
80
100
120
I , INSTANTANEOUS FORWARD CURRENT (A
)
F
0.01
0.1
1.0
10
V , INSTANTANEOUS FORWARD VOLTAGE(V)
Fi
g
.2 T
y
pical Forward Characteristics
F
0 0.4 0.8 1.0 1.4 1.8
S3AB – S3MB 3 of 4 © 2006 Won-Top Electronics
MARKING INFORMATION
RECOMMENDED FOOTPRINT
PACKAGING INFORMATION
Reel Diameter
(mm) Quantity
(PCS) Inner Box Size
L x W x H (mm) Quantity
(PCS) Carton Size
L x W x H (mm) Quantity
(PCS) Approx. Gross Weight
(KG)
330 3,000 340 x 337 x 45 6,000 370 x 370 x 420 48,000 14.0
inches
(
mm
)
Product ID Label
Directi on of Unreeling
12mm
4mm 1.6mm
Note: 1. Paper reel, white or gray color.
2. Components are packed in accordance with EIA standard 481-1 and 481-2.
TAPE & REEL
Cathode = Polarity Band
WTE = Manufacturer’s Logo
S3xB = Device Number
x = A, B, D, G, J, K or M
WTE
S3xB
0.050 MIN
(1.27 MIN)
0.082 MIN
(2.10 MIN)
0.106 MAX
(2.65 MAX)
330mm
12mm
8mm
S3AB – S3MB 4 of 4 © 2006 Won-Top Electronics
ORDERING INFORMATION
Product No. Package Type Shipping Quantity
S3AB-T3 SMB 3000/Tape & Reel
S3BB-T3 SMB 3000/Tape & Reel
S3DB-T3 SMB 3000/Tape & Reel
S3GB-T3 SMB 3000/Tape & Reel
S3JB-T3 SMB 3000/Tape & Reel
S3KB-T3 SMB 3000/Tape & Reel
S3MB-T3 SMB 3000/Tape & Reel
1. Shipping quantity given is for minimum packing quantity only. For minimum
order quantity, please consult the Sales Department.
2. To or d er RoHS / Lead Fre e version (wit h Lead Free finish), ad d “-L F”
suffix to part number above. For example, S3AB-T3-LF.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However , WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer . WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
We power your everyday.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http://www. wontop.com
