SINGLE-PHASE GLASS PASSIVATED
SILICON BRIDGE RECTIFIER
VOLTAGE RANGE 50 to 1000 Volts CURRENT 4.0 Amperes
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RS401M
THRU
RS407M
MAXIMUM RATINGS
(@ TA=25
OC unless otherwise noted)
ELECTRICAL CHARACTERISTICS
(@TA=25
OC unless otherwise noted)
Dimensions in inches and (millimeters)
FEATURES
* Ideal for printed circuit board
* Surge overload rating: 130 amperes peak
* Mounting position: Any
MECHANICAL DATA
* Epoxy: Device has UL flammability classification 94V-O
* Epoxy: UL listed the recognized component,file #94233
RS-4M
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at T
A
= 50
o
C
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermal Resistance (Note 1)
SYMBOL
V
RRM
V
DC
I
FSM
T
J
, T
STG
V
RMS
UNITS
Volts
Volts
Amps
4.0
130
6.0
26
Amps
0
C/W
0
C
Operating and Storage Temperature Range
RqJC
RqJA
I
O
-55 to + 150
Volts
RS404M
400
400
Current Squared Time I2 tA2S70
280
RS401M
50
50
35
RS402M
100
100
70
RS403M
200
200
140
RS405M
600
600
420
RS406M
800
800
560
RS407M
RS404MRS401M RS402M RS403M RS405M RS406M RS407M
1000
1000
700
2007-10
CHARACTERISTICS
at Rated DC Blocking Voltage
V
F
SYMBOL
I
R
uAmps
Maximum DC Reverse Current
Maximum Instantaneous Forward Voltage at 4.0A DC Volts
5.0
@T
A
= 100
o
C
@T
A
= 25
o
C
1.1
100
UNITS
NOTES : 1. Thermal Resistance : Heat-sink case mounted or if PCB mounted.
2. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
.189 (4.8)
.173 (4.4)
.057 (1.45)
.041 (1.05)
.303 (7.7)
.287 (7.3)
.303 (7.7)
.287 (7.3)
.303 (7.7)
.287 (7.3)
.043 (1.1)
.035 (0.9)
.087 (2.2)
.069 (1.7)
.995 (25.3)
.983 (24.7)
.382 (9.7)
.366 (9.3)
.157 (4)
.146 (3.7)
.130 (3.3)
.708 (18.0)
.669 (17.0)
.602 (15.3)
.578 (14.7)
.074 (1.9)
.059 (1.5)
f .134 (3.4)
.122 (3.1)
.013 (0.8)
.023 (0.6)
.114 (2.9)
.098 (2.5)
.150 (3.8)
.134 (3.4)
INSTANTANEOUS FORWARD VOLTAGE, (V)
PERCENT RATED PEAK REVERSE VOLTAGE, (%)
INSTANTANEOUS FORWARD CURRENT, (A)
AMBIENT TEMPERATURE, (OC)
0
0.1
0.4
1.0
4
10
40
AVERAGE FORWARD CURRENT, (A)
0
1.0
2.0
3.0
5.0
4.0
2.01.50.5 1.0 3.02.5 3.5
150100500
0 20
1.0
0.1
10
100
1000
12010040 60 80 140
RATING AND CHARACTERISTICS CURVES ( RS401M THRU RS407M )
FIG.3 TYPICAL REVERSE CHARACTERISTICS
FIG.1 TYPICAL FORWARD CURRENT
DERATING CURVE
FIG.2 TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
INSTANTANEOUS REVERSE CURRENT, (uA)
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE CURRENT, (A)
1
0
75
100
125
25
50
150
52 10 20 50 100
FIG.4 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
Single Phase Half Wave
60 Hz Inductive or
Resistive Load
T
A
= 100 OC
T
A
= 25 OC
8.3mS Single Half Sine-Wave
JEDEC Method
T
A
= 25 OC
Pulse Width = 300mS
1% Duty Cycle
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
DISCLAIMER NOTICE