15 Square Ceramic Surface Mount Slow Blow Fuse an 2410 Size RoHS 6 Compliant a [ean o SSTD0808 Catalog Ampere Typical | Volt-drop | Melting I7T | Melting 1?T | Maximum Number Rating old @100% In| < 10 mSec | @10 In Power Resistance Dissipation (ohm) | (Volt) max. | (A? Sec) (A? Sec) (W) SST 375 375mA 0.70 0.47 0.15 0.15 0.25 SST 500 500mA 0.46 0.43 0.27 0.28 0.30 SST 625 625mA 0.33 0.39 0.45 0.47 0.35 Electrical Characteristics (ULICSA STD. 248-14) SST 750 750mA 0.26 0.37 0.66 0.69 0.39 Testing Blow Time SST 1 1A 0.17 0.34 1.2 1.3 0.47 current Minimum Maximum SST 1.5 1.5A 0.10 0.29 3 3.1 0.62 100% 4 Hrs. N/A SST 2 2A 0.06 0.24 5 57 0.68 200% 1 Sec 60 Sec SST 2.5 2.5A 0.04 0.21 9 9 0.74 300% 0.2 Sec 3 Sec SST 3 3A 0.032 0.18 14 16 0.80 80% 0.02 Sec 0.1 Sec SST 3.5 354 | 0.027 0.17 18 20 0.84 SST 4 4A 0.023 0.16 23 26 0.88 Approvals Or @ C SST 5 5A 0.017 0.14 38 43 0.95 Safety Agency Approvals Amp range / Volt @ I.R.ability SST 6 6A 0.013 0.12 56 63 1.02 Ds Listed File No. 20624 SST 6.3 6.3A 0.012 0.12 62 70 1.03 375mA - 7A / 125V @ 50A AC and DC @ Certified File No. LR39772 SST 7 7A 0.010 0.11 80 90 1.08 Consult manufacturer for other ratings RoHS 6 Compliant Product RoHS Reflow Reference : JEDEC J-STD-020C (260C, 40 sec max) | Physical Specification RoHS Wave Soldering Compatible : (260C, 10 sec max) Materials . . . Ceramic body / Palladium Plated Brass Caps Environmental Specification Marking Shock Resistance On fuse: MIL-STD-202G, Method 213B, Test Condition | Current Rating in green color, bel stamped in end caps (100 Gs peak for 6 milliseconds; Sawtooth Waveform) On label: Vibration Resistance MIL-STD-202G, Method 201A (10-55 Hz, 0.06 inch, total excursion) Salt Spray Resistance MIL-STD-202G, Method IOIE, Test condition B (48 hrs) Insulation Resistance MIL-STD-202G, Method 302, Test Condition A (After Opening) 10,000 ohms minimum Solderability MIL-STD-202G, Method 208H Soldering Heat Resistance MIL-STD-202G Method 210F Test Condition C. Top Side (260C, 20 sec) MIL-STD-202G Method 2105 Test Condition D. Bottom Side (260C, 10 sec) Thermal Shock Resistance MIL-STD-202G, Method 107G, Test Condition B (-65C to +125C) Operating Temperature -55C to +125C bel,SST, Current Rating, Voltage Rating, Interrupting Rating, Appropriate Safety Logos and wi (China RoHS compliant) Packaging 5,000 fuses in 13 inches dia. reel, |2mm wide tape, per EIA Standard 481 Mechanical Dimensions 2.54+0.10mm |, 1.85+0.10mm (0.100"+0.004") | | (0.053"+0.004") 2.54+0.10mm (0.100"+0.004") ss + 7A | 6.10+40.25mm | (0.240"+0.010") SST 2. eame I 1 18mm Recommended pad layout + 125") 3. Team. io Specifications subject to change without notice ORDERING INFORMATION SEE LAST 2 PAGES Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 e Tel: 201-432-0463 Fax: 201-432-9542 e E-Mail: belfuse@belfuse.com Website: www. belfuse.comType SST RoHS 6 Compltant Square Ceramic Surface Mount Slow Blow Fuse = SSTC0808 SST - TIME CURRENT CHARACTERISTIC CURVE q<iticec R8oe<S<8s8ea8x 10000 1000 100 a) Q Zz O UO Ww wn z 10 Ww z E | 0.1 8 0.01 s 0.1 I 10 100 1000 g CURRENT IN AMPERES z NOTE - see important information under User Guideon P.08 Corporate Office Far East Office European Office Bel Fuse Inc. Bel Fuse Ltd. Bel Fuse Europe Ltd. 206 Van Vorst Street, Jersey City, NJ 07302 8F/8 Luk Hop Street Preston Technology Management Centre Tel: 201-432-0463 San Po Kang Marsh Lane, Preston PR1 8UQ Fax: 201-432-9542 Kowloon, Hong Kong Lancashire, U.K E-Mail: belfuse@belfuse.com Tel: 852-2328-5515 Tel: 44-1772-556601 Website: www. belfuse.com Fax: 852-2352-3706 Fax: 44-1772-888366 16