Ball Grid Array (BGA) Adapters 5 Energy Way, P.O. Box 1019, West Warwick, RI 02893 USA Tel. 800-424-9850/401-823-5200 * Fax 401-823-8723 * Email info@advintcorp.com * Internet http://www.advintcorp.com BGA Adapters Standard Adapter (A): Extraction Slot Adapter (AX): * Mates with Standard Socket (S) * Adapter size equals BGA Device body + .079/(2.0) * Slots allow AIC extraction tool (sold separately) to easily remove device/ adapter assembly from socket. * Mates with Extraction Socket (SB) or Guide Post Socket (SG) * Adapter size equals the BGA Device body + .157/(4.0) Features: * Soldering BGA Device to adapter subjects BGA to less thermal stress than soldering BGA directly to a PCB due to the adapter's lower mass. * Uses same footprint as BGA device. * Custom adapters available for heat sink attachment. BGA Body + .079/(2.0) .039/(1.0) BGA Body + .157/(4.0) .079/(2.0) BGA Device BGA Device BGA Adapter Extraction Tool: * Insert "T" bar end of tool into extraction slot adapter. * Slide tool to end of slot and pry adapter from socket. * Repeat in additional slots until adapter is separated from socket. Terminals: Brass - Copper Alloy (C36000), ASTM-B-16 Plating: Device Package Size < 1.024 (26mm) > 1.024 (26mm) G - Gold over Nickel Body Material: P/N 5566 FR-4 Glass Epoxy, U.L. Rated 94V-O Blade Width Tool P/N 5566 5504 Blade Width .373/(9.5mm) .675/(17.1mm) P/N 5504 Terminals How It Works: 1.27mm & 1.5mm Pitch Type -638 1.0mm Pitch Type -715 0.80mm Pitch Type -700 0.75mm Pitch Type -757 DEVICE ADAPTER Reflow (solder) BGA Device to Adapter .159 (4.04) .182 (4.62) .011/(0.28) Dia. .018 (0.46) Dia. .146 (3.71) .142 (3.61) .011 (0.28)Dia. .008 (0.20)Dia. SOCKET Reflow (solder) Socket to PCB How To Order 1 PC BOARD F G Footprint Dash# If Applicable* Body Type F - FR-4 Pitch B = .059/(1.5mm) G = .050/(1.27mm) H = .039/(1.0mm) J = .0315/(0.80mm) K = .0295/(0.75mm) inch/(mm) A XXX -638 G Terminal Plating G - Gold Terminal Type Number of Positions *See BGA Footprint Section or web site Model Type A = Standard Adapter AX = Extraction Slot Adapter (1.5, 1.27, 1.0mm Pitch only) Products shown covered by patents issued and/or pending. Specifications subject to change without notice. Page 4