LQG15HN5N6S02D - Murata Manufacturing Co., Ltd.

http://www.murata.com/

Data Sheet

Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our

products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product

specifications or transact the approval sheet for product specifications before ordering.

o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.

2010.9.9

Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Multilayer Type

0.5±0.05

(in mm)

1.0±0.05

0.5±0.05

0.25±0.1 Polarity Marking

Chip Inductor (Chip Coil) for High Frequency Multilayer Type

LQG15HN Series (0402 Size)

■ Dimensions ■ Packaging

Code Packaging Minimum Quantity

D180mm Paper Tape 10000

J330mm Paper Tape 50000

BBulk(Bag) 1000

■ Rated Value (p: packaging code)

Part Number Inductance Test Frequency Rated Current Max. of DC resistance Q (min.) Test Frequency Self Resonance Frequency (min.)

LQG15HN1N0S02p

1.0nH±0.3nH 100MHz 300mA 0.10ohm 8100MHz 6000MHz

LQG15HN1N1S02p

1.1nH±0.3nH 100MHz 300mA 0.10ohm 8100MHz 6000MHz

LQG15HN1N2S02p

1.2nH±0.3nH 100MHz 300mA 0.10ohm 8100MHz 6000MHz

LQG15HN1N3S02p

1.3nH±0.3nH 100MHz 300mA 0.10ohm 8100MHz 6000MHz

LQG15HN1N5S02p

1.5nH±0.3nH 100MHz 300mA 0.10ohm 8100MHz 6000MHz

LQG15HN1N6S02p

1.6nH±0.3nH 100MHz 300mA 0.10ohm 8100MHz 6000MHz

LQG15HN1N8S02p

1.8nH±0.3nH 100MHz 300mA 0.10ohm 8100MHz 6000MHz

LQG15HN2N0S02p

2.0nH±0.3nH 100MHz 300mA 0.12ohm 8100MHz 6000MHz

LQG15HN2N2S02p

2.2nH±0.3nH 100MHz 300mA 0.15ohm 8100MHz 6000MHz

LQG15HN2N4S02p

2.4nH±0.3nH 100MHz 300mA 0.16ohm 8100MHz 6000MHz

LQG15HN2N7S02p

2.7nH±0.3nH 100MHz 300mA 0.17ohm 8100MHz 6000MHz

LQG15HN3N0S02p

3.0nH±0.3nH 100MHz 300mA 0.18ohm 8100MHz 6000MHz

LQG15HN3N3S02p

3.3nH±0.3nH 100MHz 300mA 0.19ohm 8100MHz 6000MHz

LQG15HN3N6S02p

3.6nH±0.3nH 100MHz 300mA 0.19ohm 8100MHz 6000MHz

LQG15HN3N9S02p

3.9nH±0.3nH 100MHz 300mA 0.19ohm 8100MHz 6000MHz

LQG15HN4N3S02p

4.3nH±0.3nH 100MHz 300mA 0.21ohm 8100MHz 6000MHz

LQG15HN4N7S02p

4.7nH±0.3nH 100MHz 300mA 0.23ohm 8100MHz 6000MHz

LQG15HN5N1S02p

5.1nH±0.3nH 100MHz 300mA 0.24ohm 8100MHz 6000MHz

LQG15HN5N6S02p

5.6nH±0.3nH 100MHz 300mA 0.26ohm 8100MHz 5300MHz

LQG15HN6N2S02p

6.2nH±0.3nH 100MHz 300mA 0.27ohm 8100MHz 4300MHz

LQG15HN6N8J02p

6.8nH±5% 100MHz 300mA 0.29ohm 8100MHz 4200MHz

LQG15HN7N5J02p

7.5nH±5% 100MHz 300mA 0.31ohm 8100MHz 3900MHz

LQG15HN8N2J02p

8.2nH±5% 100MHz 300mA 0.33ohm 8100MHz 3600MHz

Operating Temperature Range: -55°C to +125°C

Only for reflow soldering.

Continued on the following page.

Continued from the preceding page.

http://www.murata.com/

Data Sheet

Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our

products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product

specifications or transact the approval sheet for product specifications before ordering.

o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.

2010.9.9

Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Multilayer Type

Part Number Inductance Test Frequency Rated Current Max. of DC resistance Q (min.) Test Frequency Self Resonance Frequency (min.)

LQG15HN9N1J02p

9.1nH±5% 100MHz 300mA 0.34ohm 8100MHz 3400MHz

LQG15HN10NJ02p

10nH±5% 100MHz 300mA 0.35ohm 8100MHz 3200MHz

LQG15HN12NJ02p

12nH±5% 100MHz 300mA 0.41ohm 8100MHz 2800MHz

LQG15HN15NJ02p

15nH±5% 100MHz 300mA 0.46ohm 8100MHz 2300MHz

LQG15HN18NJ02p

18nH±5% 100MHz 300mA 0.51ohm 8100MHz 2100MHz

LQG15HN22NJ02p

22nH±5% 100MHz 300mA 0.58ohm 8100MHz 1800MHz

LQG15HN27NJ02p

27nH±5% 100MHz 300mA 0.67ohm 8100MHz 1600MHz

LQG15HN33NJ02p

33nH±5% 100MHz 200mA 0.67ohm 8100MHz 1500MHz

LQG15HN39NJ02p

39nH±5% 100MHz 200mA 1.06ohm 8100MHz 1200MHz

LQG15HN47NJ02p

47nH±5% 100MHz 200mA 1.15ohm 8100MHz 1000MHz

LQG15HN56NJ02p

56nH±5% 100MHz 200mA 1.20ohm 8100MHz 800MHz

LQG15HN68NJ02p

68nH±5% 100MHz 180mA 1.25ohm 8100MHz 800MHz

LQG15HN82NJ02p

82nH±5% 100MHz 150mA 1.60ohm 8100MHz 600MHz

LQG15HNR10J02p

100nH±5% 100MHz 150mA 1.60ohm 8100MHz 600MHz

LQG15HNR12J02p

120nH±5% 100MHz 150mA 1.60ohm 8100MHz 600MHz

100 1000 10000

Frequency (MHz)

100

1.5nH

4.7nH

12nH

33nH

68nH

120nH

100 1000 10000

Frequency (MHz)

1000

100

Inductance (nH)

1.5nH

12nH

4.7nH

33nH

68nH

120nH

Operating Temperature Range: -55°C to +125°C

Only for reflow soldering.

■ Q-Frequency Characteristics (Typ.) ■ Inductance-Frequency Characteristics (Typ.)

!Caution (Rating)

Do not use products beyond the rated current as

this may create excessive heat.

Notice

Solderability of Tin plating termination chip might be

deteriorated when low temperature soldering profile

where peak solder temperature is below the Tin melting

point is used. Please confirm the solderability of Tin

plating termination chip before use.

■ !Caution/Notice