MSRD620CT, NRVSRD620VCT, SSRD8620CT Series Switch-mode Soft Ultrafast Recovery Reverse Polarity Power Rectifier www.onsemi.com State-of-the-art geometry features epitaxial construction with glass passivation. Ideally suited for low voltage, high frequency switching power supplies, free wheeling diode and polarity protection diodes. SOFT ULTRAFAST REVERSE POLARITY RECTIFIER 6.0 AMPERES, 200 VOLTS Features * Soft Ultrafast Recovery * Matched Dual Die Construction - May Be Paralleled for High * * * * Current Output Short Heat Sink Tab Manufactured - Not Sheared Epoxy Meets UL 94 V-0 @ 0.125 in. NRVSRD and SSRD8 Prefixes for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable These Devices are Pb-Free and are RoHS Compliant* DPAK CASE 369C 1 4 3 MARKING DIAGRAM AYWW S 620RG Mechanical Characteristics * Case: Epoxy, Molded * Weight: 0.4 Grams (Approximately) * Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable * Lead and Mounting Surface Temperature for Soldering Purposes: * 260C Max. for 10 Seconds ESD Ratings: Machine Model = C Human Body Model = 2 A Y WW G = Assembly Location = Year = Work Week = Pb-Free Package ORDERING INFORMATION Package Shipping MSRD620CTRG DPAK (Pb-Free) 75 Units/Rail SSRD8620CTRG DPAK (Pb-Free) 75 Units/Rail MSRD620CTT4RG DPAK (Pb-Free) 2,500 / Tape & Reel NRVSRD620VCTT4RG DPAK (Pb-Free) 2,500 / Tape & Reel SSRD8620CTT4RG DPAK (Pb-Free) 2,500 / Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2016 October, 2016 - Rev. 4 1 Publication Order Number: MSRD620CTR/D MSRD620CT, NRVSRD620VCT, SSRD8620CT Series MAXIMUM RATINGS Rating Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Symbol Value Unit VRRM VRWM VR 200 V Average Rectified Forward Current (At Rated VR, TC = 162C) Per Leg Per Package IO A 3.0 6.0 Non-Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions, Halfwave, Single Phase, 60 Hz) Per Package Storage/Operating Case Temperature IFSM A 45 Tstg, Tc -65 to +175 C TJ -65 to +175 C Operating Junction Temperature Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Rating Symbol Thermal Resistance - Junction-to-Case (Note 1) Per Leg RqJC Thermal Resistance - Junction-to-Ambient (Note 1) Per Leg RqJA Thermal Resistance - Junction-to-Ambient (Note 2) Per Leg RqJA Value Unit C/W 5.0 C/W 60 C/W 166 1. Mounted with 700 mm2 copper pad size (approximately 1 in2) 1 oz FR4 board. 2. Mounted with pad size approximately 46 mm2 copper, 1 oz FR4 board. ELECTRICAL CHARACTERISTICS Rating Symbol Maximum Instantaneous Forward Voltage (Note 3) Per Leg (IF = 3.0 A) (IF = 6.0 A) VF Maximum Instantaneous Reverse Current (Note 3) Per Leg (VR = 200 V) IR Maximum Reverse Recovery Time (Note 4) Per Leg (VR = 30 V, IF = 1.0 A, di/dt = 50 A/ms) trr Value Unit TJ = 25C TJ = 125C 1.15 1.30 0.95 1.15 TJ = 25C TJ = 125C 1.0 200 V mA ns 75 Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 3. Pulse Test: Pulse Width 380 ms, Duty Cycle 2%. 4. trr measured projecting from 25% of IRM to ground. www.onsemi.com 2 MSRD620CT, NRVSRD620VCT, SSRD8620CT Series IF, INSTANTANEOUS FORWARD CURRENT (AMPS) IF, INSTANTANEOUS FORWARD CURRENT (AMPS) TYPICAL CHARACTERISTICS 100 10 TJ = 150C 125C 1.0 25C -55C 0.1 0 1.0 0.5 1.5 2.0 2.5 3.0 125C 1.0 25C -55C 0.1 0 1.0 0.5 1.5 2.0 2.5 3.0 Figure 1. Typical Forward Voltage, Per Leg Figure 2. Maximum Forward Voltage, Per Leg 1E-03 IR , MAXIMUM REVERSE CURRENT (AMPS) IR , REVERSE CURRENT (AMPS) TJ = 150C VF, MAXIMUM INSTANTANEOUS FORWARD VOLTAGE (VOLTS) TJ = 150C 1E-05 125C 1E-06 1E-07 25C 1E-08 1E-09 -55C 1E-10 0 20 40 60 80 100 120 140 160 TJ = 150C 1E-04 125C 1E-05 1E-06 25C 1E-07 -55C 1E-08 180 200 0 20 40 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 3. Typical Reverse Current, Per Leg Figure 4. Maximum Reverse Current, Per Leg IF(AV) , AVERAGE FORWARD CURRENT (AMPS) 100 TJ = 25C C, CAPACITANCE (pF) 10 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 1E-04 10 1.0 0 100 40 80 120 160 10 RATED VOLTAGE APPLIED RqJC = 5C/W 9 8 7 6 dc 5 4 3 SQUARE WAVE 2 1 0 80 200 90 100 110 120 130 140 150 160 170 180 TC, CASE TEMPERATURE (C) VR, REVERSE VOLTAGE (VOLTS) Figure 6. Typical Current Derating, Case (Per Leg) Figure 5. Typical Capacitance www.onsemi.com 3 MSRD620CT, NRVSRD620VCT, SSRD8620CT Series TYPICAL CHARACTERISTICS 1000 R(t) (C/W) 100 Duty Cycle = 50% 20% 10 10% 5% 2% 1 1% 0.1 Single Pulse 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 PULSE TIME (sec) 1 10 100 1000 100 1000 Figure 7. Thermal Response, Junction-to-Ambient (46 mm2 pad) 100 R(t) (C/W) Duty Cycle = 50% 10 20% 10% 5% 1 2% 1% 0.1 Single Pulse 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 PULSE TIME (sec) 1 Figure 8. Thermal Response, Junction-to-Ambient (1 in2 pad) www.onsemi.com 4 10 MSRD620CT, NRVSRD620VCT, SSRD8620CT Series PACKAGE DIMENSIONS DPAK (SINGLE GAUGE) CASE 369C ISSUE F NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. 5. DIMENSIONS D AND E ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY. 6. DATUMS A AND B ARE DETERMINED AT DATUM PLANE H. 7. OPTIONAL MOLD FEATURE. A E C A b3 B c2 4 L3 Z D 1 2 H DETAIL A 3 L4 NOTE 7 b2 e c SIDE VIEW b TOP VIEW 0.005 (0.13) M C Z H L2 GAUGE PLANE C L L1 DETAIL A DIM A A1 b b2 b3 c c2 D E e H L L1 L2 L3 L4 Z BOTTOM VIEW Z SEATING PLANE BOTTOM VIEW A1 ALTERNATE CONSTRUCTIONS ROTATED 905 CW INCHES MIN MAX 0.086 0.094 0.000 0.005 0.025 0.035 0.028 0.045 0.180 0.215 0.018 0.024 0.018 0.024 0.235 0.245 0.250 0.265 0.090 BSC 0.370 0.410 0.055 0.070 0.114 REF 0.020 BSC 0.035 0.050 --- 0.040 0.155 --- MILLIMETERS MIN MAX 2.18 2.38 0.00 0.13 0.63 0.89 0.72 1.14 4.57 5.46 0.46 0.61 0.46 0.61 5.97 6.22 6.35 6.73 2.29 BSC 9.40 10.41 1.40 1.78 2.90 REF 0.51 BSC 0.89 1.27 --- 1.01 3.93 --- SOLDERING FOOTPRINT* 6.20 0.244 2.58 0.102 5.80 0.228 3.00 0.118 1.60 0.063 6.17 0.243 SCALE 3:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 5 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MSRD620CTR/D