| 1N-PHASE MIXERS - pQWER iDIVIDER 3dB 90 | HYBRIO PHASE COMPENSATE VE 0h) hy NS ( wo L ~ PRINCIPAL SPECIFICATIONS Model Center Freq TBandwidth Number fo, MHz RF input lQP-25S-***B 20 1000 10% of fo For complete model number replace **with desired LO freq, fo in MHz. General Notes: 4. | & Q networks are integrated devices that produce two quadrature-phased, equal amplitude signals when fed RF and LO signals. 2. The IQP-25S series features an in-circuit, voltage controlled phase balance that allows fine adjustment of phase. This feature provides accuracy not previously attainable in a comparably small package. In addition, the voltage controlled phase balance input facilitates closed loop, servo operation using the phase adjustment input as feedback. 3. Merrimac | & Q networks comply with the relevant sections of MIL-M-28837 and may be supplied screened for compliance with additional specifications for military and space applications requiring the highest reliability. GENERAL SPECIFICATIONS RF and LO Input Characteristics Impedance: 50 O nom. VSWR: 1.5:1 max. RF Power Level: 0 dBm nom. LO Power Level: +10 dBm nom. | & Q Output Characteristics Video Bandwidth, nom: DC to 50 MHz Output Impedance: 50 2 nom. Conversion Loss (RF to | or Q): 10 dB typ., 42 dB max. IF Balance (| to Q) Phase, @ Vc=t+5V: 90 42 Bias Control: 0 to +15V Adjustable Range: + 10 nom. Sensitivity: 5 nom. Temperature Stability: + 1 max. Amplitude: 0.2 dB max. Weight, nominal: 0.35 oz (10g) Operating Temp: 55 to +85C TRE and Video Bandwidths typically much greater than that specified. . . LO INPUT ~ Meri-Pac S-Package Outline 185 {PHASE ADJUST Vr 670 \_ 1000+ 020 200 25.402 0.5% T =a 4 NOTES: } o> 2 4 Tolerance on 3 place decimals +.010{.25) except as noted ile.e-o-o.o PS 2. Dimensions in inches over milkmeters. Q 3. Lead dimensions apply only at body. 4, Altunmarked pins are case ground RF INPUT \/- Ley al 018+ coo, | 46% 08 18 PINS I Tila 2.54 PIN SPACING 13Feb96 |