DC-DC Converters Power. Power Module type DC-DC Converters Bus Converter Module Type CDS40048 Ordering information CD 1 S 2 400 3 48 4 12 5 -O 6 1Series name 2Single output 3Output wattage 4Input voltage 48:DC36 - 76V 5Output voltage 6Optional M:with Mounting hole M3 tapped R MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT CDS4004802 CDS4004803 CDS4004805 CDS4004807 CDS4004812 CDS4004815 CDS4004824 CDS4004828 200 330 400 405 500 510 504 504 2V 100A 3.3V 100A 5V 80A 7.5V 54A 12.5V 40A 15V 34A 24V 21A 28V 18A SPECIFICATIONS INPUT MODEL VOLTAGE[V] CURRENT[A] EFFICIENCY[%] CDS CDS OUTPUT *1 DCIN 48V, Io=100% DCIN 48V, Io=50% VOLTAGE[V] CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] 0 to +85C *2 RIPPLE[mVp-p] -20 - 0C *2 0 to +85C *2 RIPPLE NOISE[mVp-p] -20 - 0C *2 0 to +65C TEMPERATURE REGULATION[mV] -20 to +85C *3 DRIFT[mV] START-UP TIME[ms] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY OTHERS OUTPUT VOLTAGE SETTING[V] OVERCURRENT PROTECTION OVERVOLTAGE PROTECTION[V] REMOTE SENSING REMOTE ON/OFF INPUT-OUTPUT INPUT-FG OUTPUT-FG OUTPUT-RC2,RC3 OPERATING TEMP.,HUMID.AND ALTITUDE *6 STORAGE TEMP.,HUMID.AND ALTITUDE VIBRATION IMPACT AGENCY APPROVALS CASE SIZE/WEIGHT COOLING METHOD CDS4004802 CDS4004803 CDS4004805 CDS4004807 CDS4004812 CDS4004815 CDS4004824 CDS4004828 DC36 - 76 6typ 9typ 10typ 10typ 12typ 12typ 12typ 12typ 73typ 80typ 84typ 87typ 89typ 89typ 89typ 89typ 75typ 82typ 86typ 88typ 91typ 90typ 90typ 90typ 2 3.3 5 7.5 12.5 15 24 28 100 100 80 54 40 34 21 18 10max 16max 20max 30max 40max 60max 95max 95max 20max 30max 40max 60max 100max 150max 190max 190max 80max 80max 80max 100max 120max 120max 120max 120max 140max 140max 140max 150max 160max 160max 160max 160max 100max 100max 100max 140max 150max 150max 150max 150max 150max 150max 150max 160max 180max 180max 180max 180max 25max 35max 50max 75max 120max 180max 280max 280max 40max 60max 85max 130max 200max 310max 480max 480max 10max 16max 20max 30max 40max 60max 90max 90max 200max (DCIN 48V, Io=100%) Fixed (TRM pin open), 60 - 110% adjustable by external VR or external voltage 1.0 - 2.2 *4 1.98 - 3.63 3.0 - 5.5 4.50 - 8.25 7.50 - 13.75 9.0 - 16.5 14.4 - 26.4 16.8 - 32.0 *5 1.95 - 2.10 3.25 - 3.45 4.90 - 5.20 7.25 - 7.85 12.00 - 13.00 14.40 - 15.60 23.04 - 24.96 26.88 - 29.12 Works over 105% of rating and recovers automatically 2.80 - 4.50 4.00 - 5.50 5.75 - 7.00 8.60 - 10.50 14.35 - 17.50 17.25 - 21.00 27.60 - 33.60 33.00 - 39.20 Provided Provided (On both side of input and output) DC1500V 1minute, DC500V 50MW min (20t15C) DC1500V 1minute, DC500V 50MW min (20t15C) AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20t15C) AC100V 1minute, Cutoff current = 100mA, DC100V 10MW min (20t15C) -20 to +85C (On aluminum base plate), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -40 to +85C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max 10 - 55Hz, 49.0m/s2 (5G) 3minutes period, 60minutes each along X, Y and Z axis 196.1m/s2 (20G), 11ms, once each X, Y and Z axis UL60950-1, C-UL, EN60950-1 61X12.7X116.8mm [2.4X0.5X4.6 inches] (WXHXD) / 180g max Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) *1 At rated input(DC48V) and rated load. *2 Ripple and ripple noise is measured by using measuring board with recommended capacitor Co & the film capacitor 0.1mF. Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN:RM101). *3 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. *4 When using with in the range of 1-1.2V ,please consult with us. *5 CDS4004828 : Output voltage adjustment range is 60 - 114.3%. *6 Please consult us in regard to use from -40C. CDS-2 CDS_E.indd 2 15.6.19 11:38:55 AM CDS40048 External view Recomending size for processing PCB Base Plate(Aluminum) (TOP VIEW) Mounting Hole for Heat Sink(FG) 10-1.2 [0.05] 106.68 DCIN +VIN +VOUT 3.0 -0.5 [0.12] [0.12] CDS [0.01] Weight: 180g max Tolerance:t0.3 [t0.012] Base Plate: Aluminum Dimensions in mm, [ ]= inches Mounting hole screwing torque: 0.49N m (5.0kgf cm) max [0.1] 2.54 +1 3.0t0.5 -VOUT TRM +S -S IOG AUX [0.45] [1.2] RC1 -VIN [0.04] 1t0.1 CB VB TMP RC3 RC2 Part A [0.02] [0.03] ]= inches CDS 0.31 t=0.8t0.1 Signal Pin 10-0.6t0.1 Dimensions in mm, [ Div.: 0.5inch [0.15] [0.1] [4.2] 33.81=11.43 2.54 106.68 [0.15] 3.81 2.54 DC IN/DC OUT/RC1 Pin 4-3.5 [0.14] Signal Pin Name Plate 30.48 3.81 [0.15] A [0.1] 37.08 [1.45] DC OUT [1.46] [0.45] 37.08 [0.4] Mounting Hole (FG) [0.15] 42.54=10.16 33.81=11.43 [4] [0.1] 42.54 =10.16 [0.4] 106.68 [4.2] 101.6t 0.5 4-3.4 [0.13] 3.81 [0.15] 2.54 [0.1] 0.31 [0.01] [0.5] Including case floating12.7+0.8 -0.5 Lot No. [4.6] [0.5] 116.8t1 Case (PBT) 12.7t0.5 [4.2] 50.8 [2.0] 10.16 11.43 [0.4] [0.45] 11.43 [0.45] [2.4] [2] 50.8 61t0.5 11-1.7 [0.07] 7.62 3.81 [0.3] [0.15] 4-3.4 [0.13] Performance data INPUT CURRENT CHARACTERISTICS (CDS4004828) EFFICIENCY CHARACTERISTICS (CDS40048) 20 92 28V 15 88 10 28V, Io=100% 5 28V, Io=50% EFFICIENCY INPUT CURRENT A 90 12.5V 86 5V 84 82 3.3V 80 78 0 0 20 40 60 INPUT VOLTAGE 80 V 100 76 Input Volt.= 48Vdc 0 100 200 300 OUTPUT WATTAGE 400 500 600 W CDS-3 CDS-3 CDS_E.indd 3 15.6.19 11:38:56 AM DC-DC Converters Power. Power Module type DC-DC Converters Bus Converter Module Type CDS500/600 Ordering information CD 1 S 2 600 48 3 4 O 12 5 6 -O 7 1Series name 2Single output 3Output wattage 4Input voltage 24 :DC18 - 36V 48 :DC36 - 76V 5Output voltage 6H :HighEfficiency (24VIN Model only) 7Optional M :with Mounting hole M3 tapped R MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT CDS5002428H CDS6002412 CDS6002412H CDS6002428 CDS6002428H CDS6004812 CDS6004828 504 600 600 616 616 700 700 28V 18A 12.5V 48A 12.5V 48A 28V 22A 28V 22A 12.5V 56A 28V 25A SPECIFICATIONS INPUT CDS CDS OUTPUT PROTECTION CIRCUIT AND OTHERS ISOLATION ENVIRONMENT SAFETY OTHERS MODEL VOLTAGE[V] CURRENT[A] CDS5002428H CDS6002412 CDS6002412H CDS6002428 CDS6002428H CDS6004812 CDS6004828 DC18 - 36 DC20.5 - 36 DC18 - 36 DC19 - 36 DC36 - 76 *1 24typ 30typ 29typ 30typ 29typ 17typ 17typ Io=100% 89typ(DCIN 24V) 83typ(DCIN 24V) 87typ(DCIN 24V) 86typ(DCIN 24V) 89typ(DCIN 24V) 89typ(DCIN 48V) 89typ(DCIN 48V) EFFICIENCY[%] Io=50% 90typ(DCIN 24V) 87typ(DCIN 24V) 90typ(DCIN 24V) 87typ(DCIN 24V) 90typ(DCIN 24V) 91typ(DCIN 48V) 90typ(DCIN 48V) VOLTAGE[V] 28 12.5 12.5 28 28 12.5 28 CURRENT[A] 18 48 48 22 22 56 25 LINE REGULATION[mV] 95max 40max 40max 95max 95max 40max 95max LOAD REGULATION[mV] 190max 100max 100max 190max 190max 100max 190max 0 to +85C *2 120max 120max 120max 120max 120max 120max 120max RIPPLE[mVp-p] -20 - 0C *2 160max 160max 160max 160max 160max 160max 160max 0 to +85C *2 150max 150max 150max 150max 150max 150max 150max RIPPLE NOISE[mVp-p] -20 - 0C *2 180max 180max 180max 180max 180max 180max 180max 0 to +65C 280max 120max 120max 280max 280max 120max 280max TEMPERATURE REGULATION[mV] -20 to +85C 480max 200max 200max 480max 480max 200max 480max *3 90max DRIFT[mV] 40max 40max 90max 90max 40max 90max 200max (DCIN 48V, Io=100%) START-UP TIME[ms] 200max (DCIN 24V, Io=100%) Fixed (TRM pin open), 80 - 110% adjustable by external VR or external voltage OUTPUT VOLTAGE ADJUSTMENT RANGE[V] 22.40 - 32.00 *4 *5 10.00 - 13.75 10.00 - 13.75 *5 22.40 - 30.80 22.40 - 32.00 *4 *5 10.00 - 13.75 22.40 - 32.00 *4 OUTPUT VOLTAGE SETTING[V] 27.72 - 28.28 *6 12.00 - 13.00 12.00 - 13.00 26.88 - 29.12 26.88 - 29.12 12.00 - 13.00 26.88 - 29.12 OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically OVERVOLTAGE PROTECTION[V] 33.00 - 39.20 14.35 - 17.50 33.00 - 39.20 14.35 - 17.50 33.00 - 39.20 REMOTE SENSING Provided REMOTE ON/OFF Provided (On both side of input and output) INPUT-OUTPUT AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) INPUT-FG AC500V 1minute, Cutoff current = 10mA, DC500V 50MW min (20t15C) OUTPUT-FG AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (20t15C) OUTPUT-RC2,RC3 AC100V 1minute, Cutoff current = 100mA, DC100V 10MW min (20t15C) OPERATING TEMP.,HUMID.AND ALTITUDE *7 -20 to +85C (On aluminum base plate), 20 - 95%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 - 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 49.0m/s2 (5G) 3minutes period, 60minutes each along X, Y and Z axis IMPACT 196.1m/s2 (20G), 11ms, once each X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 61X12.7X116.8mm [2.4X0.5X4.6 inches] (WXHXD) / 200g max COOLING METHOD Conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) *1 At rated input(DC24,DC48V) and rated load. *2 Ripple and ripple noise is measured by using measuring board with recommended capacitor Co & the film capacitor 0.1mF. Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN:RM101). *3 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. *4 CDS5002428H,CDS6002428H,CDS6004828:Output voltage adjustment range is 80 - 114.3%. *5 CDS5002428H,CDS6002412H,CDS6002428H:When the output voltage adjustment range is 101% or more,the input voltage range is limited(Refer to Instruction Manual). *6 Aluminum baseplate temperature Tc=25C *7 Please consult us in regard to use from -40C. CDS-4 CDS_E.indd 4 15.6.19 11:38:57 AM CDS500/600 External view Recomending size for processing PCB Base Plate(Aluminum) (TOP VIEW) Mounting Hole for Heat Sink(FG) 10.16 11.43 [0.4] [0.45] 106.68 [1.46] DCIN [1.2] [0.1] [4.2] +VIN +VOUT 3.0 -0.5 [0.12] [0.12] CDS Weight: 200g max Tolerance:t0.3 [t0.012] Base Plate: Aluminum Dimensions in mm, [ ]= inches Mounting hole screwing torque: 0.49N m (5.0kgf cm) max [0.1] 2.54 +1 3.0t0.5 -VOUT TRM +S -S IOG AUX [0.04] 1t0.1 RC1 -VIN Part A [0.02] [0.03] CB VB TMP RC3 RC2 [0.01] Signal Pin 10-0.6t0.1 ]= inches CDS 0.31 t=0.8t0.1 Dimensions in mm, [ Div.: 0.5inch [0.15] [0.45] 2.54 106.68 33.81=11.43 [0.15] 3.81 2.54 DC IN/DC OUT/RC1 Pin 4-3.5 [0.14] Signal Pin Name Plate 30.48 3.81 [0.15] A [0.1] 37.08 [1.45] DC OUT 37.08 [0.4] Mounting Hole (FG) [0.15] [0.45] 42.54=10.16 33.81=11.43 [4] [0.1] 42.54 =10.16 [0.4] 106.68 [4.2] 101.6t0.5 4-3.4 [0.13] 3.81 [0.15] 2.54 [0.1] 0.31 [0.01] [0.5] Including case floating12.7+0.8 -0.5 Lot No. [4.6] [0.5] 116.8t1 12.7t0.5 [4.2] Case (PBT) 50.8 [2.0] 11.43 [0.45] [2.4] [2] 10-1.2 [0.05] 61t0.5 50.8 13-1.7 [0.07] 7.62 3.81 [0.3] [0.15] 4-3.4 [0.13] Performance data INPUT CURRENT CHARACTERISTICS (CDS60048) EFFICIENCY CHARACTERISTICS (CDS60048) 92 25 91 90 20 15 EFFICIENCY INPUT CURRENT A 30 Io=100% 10 Io=50% 5 28V 89 12.5V 88 87 86 Input Volt.= 48Vdc 0 0 20 40 60 INPUT VOLTAGE 80 V 100 85 0 100 200 300 400 500 OUTPUT WATTAGE 600 700 800 W CDS-5 CDS-5 CDS_E.indd 5 15.6.19 11:38:57 AM