.375
W
H
D
H
D
W
Extra-
Heavy Duty
Ball-Bearing,
Swivel Type
Racks & AccessoriesBud
2825
BUD Drawers, Shelves and Accessories
TWO-PIECE SLIDING MECHANISMS
Each of these Zinc Plated, Alloy Steel telescoping and linear motion mechanisms consists of an outer member,
inner member, ball retainer and ball bearings. All types offer a smooth, precise telescoping movement with long
service life. Requires two pairs of panel mounting rails per cabinet rack.
Load rating shown in table
is "per pair"
*
3/4 extension, front disconnect, positive stop Max. chassis width 2.00" less than rack panel
width, when used with BAS-5106 Slide Mounting Bracket Kit.
DIMENSIONS: in.
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Bud
Part No.
Slide
Length Travel * Load Rating
(lbs.)
Price Per
Pair
563-AS-5001-A AS-5001-A 16.00" 12.00" 120 33.50
563-AS-5002-A AS-5002-A 20.00" 15.00" 92 35.10
563-AS-5004-A AS-5004-A 26.00" 19.00" 70 38.75
Recommended for two-piece slides subject to maximum
chassis width as shown above. It is easier to assemble.
Allows slides to be mounted to panel mounting surface or
accessory ange of panel mounting rails.
SLIDE MOUNTING BRACKET KIT
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Bud
Part No.
Price per
Pair
563-BAS-5106 BAS-5106 33.20
• 12 Gauge Steel
• Sold in pairs
• Finish: Black
• Rail Mounting Hardware included
(Equipment Mounting Screws sold separately:
Mouser No. 563-7346)
STANDARD PANEL MOUNTING RAILS
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Bud
Part No.
Fits Cabinet Rack
with Panel Space
Price Per
Pair
563-PMR-9448 PMR-9448 21.00" 60.30
563-PMR-2331 PMR-2331 24.50" 51.20
563-PMR-9450 PMR-9450 42.00" 74.40
563-PMR-9451 PMR-9451 52.50" 82.45
563-PMR-9452 PMR-9452 61.25" 92.20
563-PMR-9453 PMR-9453 71.00" 100.80
563-PMR-9454 PMR-9454 78.75" 106.85
DESK TOP DRAWERS
Front panel height, 3.5". Hinged drawer top has
plastic laminate bonded to Aluminum. Requires
two pairs of panel mounting rails per cabinet rack.
Supports 92 lbs.
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Bud
Part No. Color Inside
Dimensions: in.
Price
Each
563-DD-2363BT DD-2363-BT Black Textured 16.87x13.87x3 251.80
563-DD-2363-MG DD-2363-MG Metallic Gray 16.87x13.87x3 251.80
SLIDING KEYBOARD/MOUSE SHELF
Sliding keyboard shelf ts 19" and 23" panel
width racks. Mouse pad slides out from
underneath the shelf in either the right or left
side. Takes up 2-U (3.5") of panel space.
Includes all mounting hardware.
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Bud
Part No.
Panel
Width (in.)
Max. Keyboard
Width (in.)
Price
Each
563-KS-1787-BT KS-1787-BT 23 20.5 181.60
SLIDING SHELVES
Sliding shelves, available in ventilated and non-
ventilated versions, t 19" wide panel spaces and
all cabinet rack depths. Shelves 16-gauge steel
and anged on all four sides for added support.
Universal mounting brackets allow exibility in
mounting. Shelves allow sufcient room in rear for
cables and power outlet strips. Requires two pairs
of panel mounting rails per cabinet rack.
Finish: Smooth Black
Non-Ventilated
Ventilated
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Bud
Part No.
Cabinet Racks (in.) Shelves (in.) Price
Each
Panel
Width
Max. Clear
Inside Depth Width Depth Travel
Ventilated
563-SH-2391 SH-2391 19 17 17.9 14.25 8 107.55
Non-Ventilated
563-SH-2389 SH-2389 19 24 17.9 21.25 15 119.05
563-SH-2390 SH-2390 19 29.25 17.9 26.5 19 128.65
mouser.com/bud (800) 346-6873
© Copyright 2016 Mouser Electronics
© Copyright 2016 Mouser Electronics
ADJUSTABLE SHELF, OPEN RACK
Open rack shelves t 19" and 23" wide
panel spaces. Shelves are 16 gauge
steel and are anged for added support.
Shelves are adjustable for depth within
rack and come with all mounting brackets
and hardware.
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Bud
Part No. Color Dimensions: in. Price
Each
Depth Width
563-SA-1279-BT SA-1279-BT Black Textured 20 17.562 108.81
EQUIPMENT SHELF-OPEN RACK
Open rack shelves t 19" and 23" wide panel spaces and 5.25" panel
height. Shelves are one-piece, 16 gauge steel and are anged for
added support. They are offered in non-ventilated and ventilated
versions, and include all mounting hardware. Supports 150lbs.
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Bud
Part No. Color Dimensions: in. Price
Each
Depth Width
Ventilated
563-SA-1751-BT SA-1751-BT Black Textured 15.00 17.62 70.45
563-SA-1753-BT SA-1753-BT Black Textured 20.00 17.62 83.65
563-SA-1753-MG SA-1753-MG Metallic Grey 20.00 17.62 83.65
Ventilated
563-SA-1750-BT SA-1750-BT Black Textured 15.00 17.62 64.55
563-SA-1752-BT SA-1752-BT Black Textured 20.00 17.62 77.15
NON-VENTILATED STATIONARY SHELVES
Stationary shelves t 19" wide panel spaces and all cabinet
depths. Shelves are one-piece, 16-gauge steel with anged
front and rear to support up to 200lbs. All shelves come
with necessary mounting hardware. Additional brackets
are furnished to allow exibility in mounting. Shelves allow
sufcient room in rear for cables and power outlet strips.
Requires two pairs of panel mounting rails per cabinet rack.
Finish: Smooth Black
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Bud
Part No.
Cabinet Racks Shelves: in. Price
Each
Panel Width
(in.)
Max. Clear
Inside Depth (in.) Width Depth
563-SH-2381 SH-2381 19.00 24.00 17.90 21.25 62.50
563-SH2382 SH-2382 19.00 29.25 17.90 26.50 70.30
Finish: Metallic Gray
SLOPING PANEL CABINETS
Hinged top opens completely for access
to components mounted on chassis.
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Bud
Part No.
Dimensions: in. Chassis
to Fit
Price
Each
Depth Width Height
563-C-1584 C-1584 7.31 7.06 6.5 AC-402 69.30
563-C-1587 C-1587 8 8.06 8 AC-405 75.45
563-C1588 C-1588 8 10.06 8 AC-406 83.80
563-C-1893 C-1893 10.5 18.06 10 AC-415 137.60
563-C-1894 C-1894 8 14.06 8 AC-409 85.10
HEAVY GAUGE STEEL POLE MOUNT BRACKET
Specications:
• Zinc plated bracket with dichromate sealer
• Stainless Steel band clamps
• Quick Adjust Band clamps allow for
reduced installation time For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Bud
Part No. Color Price
Each
563-BPM-22261 BPM-22261 No Color 86.05
• All mounting hardware supplied with kit
• Allows Bud NEMA boxes to be mounted
to round or rectangular poles
NEMA SHEET METAL BOX
WITH MOUNTING BRACKETS
Design Features:
Made from durable 14 ga. steel. Designed to
meet NEMA 1, 2, 4, 4X, 12, 13 and IP65 and
UL508-4X ratings. Hinged cover clamps to
base with stainless screws and brackets for a
watertight seal. Also comes with a 14 gauge
steel, powder-coated removable inner panel.
Finish: Gray Powder Coat
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Bud
Part No.
Dimensions: in. Price
Each
Depth Width Height
563-SN-3701 SN-3701 6 8 3.5 63.80
RUBBER AND PLASTIC FEET For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Bud
Part No. Description Price
Each
563-F-3581 F-3581 .50" sq. x .21" high rubber feet with self-adhesive backing .40
563-F-3599 F-3599 .81" sq. x .31" high rubber feet with self-adhesive backing .60
563-F-7264-A F-7264-A .75" dia. x .37" high plastic feet with mounting hardware .60
563-F-7800-A F-7800-A .87" dia. x .50" high plastic feet with mounting hardware .60
563-F-8038 F-8038 .75" dia. x .12" thick self-adhesive rubber pad .20
563-F-9653 F-9653 Press-t rubber feet t into .43" dia. hole. 1.00
Wheels hard tread rubber 4" in diameter x 1.25" wide. Available with or
without side brake. Increase overall height of cabinet by approximately 4".
Extra-Heavy Duty
Ball-Bearing, Swivel Type
CASTERS
Casters are priced, sold, and packaged as pairs
with all necessary mounting hardware included.
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Bud
Part No. Load Rating Price
Each
563-RC-7758 RC-7758 200 lbs. 32.90
For quantities greater than listed, call for quote.
With Locking Brake
563-RC-7761 RC-7761 240 lbs. 77.50
Without Locking Brake
563-RC-7762 RC-7762 240 lbs. 67.00
For Series 60 and Economizer cabinet racks. Ball-bearing
wheels made of hard tread composition. Height: 3.25"