Published Date : MAY 18, 2005 Drawing No : XDSA3012 V6 Checked : Shin Chi P.1/3
www.SunLED.com
Part Number: XZDMOK10A
SURFACE MOUNT DISPLAY
Features
0.4INCH DIGIT HEIGHT.
LOW CURRENT OPERATION.
EXCELLENT CHARACTER APPEARANCE.
I.C. COMPATIBLE
MECHANICALLY RUGGED.
GRAY FACE,WHITE SEGMENT.
PACKAGE : 800PCS / REEL.
RoHS COMPLIANT.
Part
Number
Emitting
Color
Emitting
Material
Luminous
Intensity
(IF=10mA)
ucd
Wavelength
nm
λP
Description
min. typ.
XZDMOK10A Orange InGaAlP 12000 41190 610 Common Anode, Rt. Hand Decimal
Absolute Maximum Ratings
(TA=25°C)
) )
)
MOK
(InGaAlP) Unit
Reverse Voltage VR 5 V
Forward Current IF 30 mA
Forward Current (peak)
1/10 Duty Cycle
0.1ms Pulse Width
iFS 195 mA
Power Dissipation PT 75 mW
Operating Temperature TA -40 ~ +85
°C
Storage Temperature Tstg -40 ~ +85
MOK
(InGaAlP) Unit
Forward Voltage (typ.)
(IF=10mA) VF 2.0 V
Forward Voltage (max.)
(IF=10mA) VF 2.5 V
Reverse Current
(VR=5V) IR 10 uA
Wavelength of Peak
Emission
(IF=10mA) λP610 nm
Wavelength of Dominant
Emission
(IF=10mA) λD601 nm
Spectral Line Full Width
At Half-Maximum
(IF=10mA) ∆λ 29 nm
Capacitance
(VF=0V, f=1MHz) C15 pF
Operating Characteristics
(TA=25°C)
) )
)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
Published Date : MAY 18, 2005 Drawing No : XDSA3012 V6 Checked : Shin Chi P.2/3
www.SunLED.com
Part Number: XZDMOK10A
SURFACE MOUNT DISPLAY
MOK
Published Date : MAY 18, 2005 Drawing No : XDSA3012 V6 Checked : Shin Chi P.3/3
www.SunLED.com
Part Number: XZDMOK10A
SURFACE MOUNT DISPLAY
Remarks:
If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical
accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous Intensity: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Recommended Soldering Pattern (Units : mm;Tolerance:±0.15)
Tape Specification (Units : mm)
