INTEGRATED CIRCUITS DIVISION
www.ixysic.com
DS-CPC1706-R03 1
e3
Pb
CPC1706
Single-Pole, Normally Open
4-Pin OptoMOS® DC Power SIP Relay
Part # Description
CPC1706Y 4-Pin (8-Pin Body) Power SIP Package (25 per tube)
Parameter Rating Units
Blocking Voltage 60 VP
Load Current 4 ADC
On-Resistance (max) 0.09
Applications
Features
Description
Ordering Information
Pin Configuration
• Industrial Controls
• Motor Control
• Robotics
• Medical Equipment—Patient/Equipment Isolation
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• IC Equipment
• Home Appliances
• Handle Load Currents Up to 4ADC
• 2500Vrms Input/Output Isolation
• Power SIP Package
• High Reliability
• No Moving Parts
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
IXYS Integrated Circuits Division and IXYS have
combined to bring OptoMOS® technology, reliability,
and compact size to a new family of high power solid
state relays. The CPC1706, a DC-switching, normally
open (1-Form-A) Solid State Relay, is part of that
family.
Employing optically coupled MOSFET technology,
the CPC1706 provides 2500Vrms of input to output
isolation. The relay output is constructed with efficient
MOSFET switches that use IXYS Integrated Circuits
Division's patented OptoMOS architecture. The input,
a highly efficient GaAlAS infrared LED, controls the
optically coupled output.
The combination of low on-resistance and high load
current handling capability makes this relay suitable for
a variety of high performance switching applications.
Switching Characteristics of
Normally Open Devices
Approvals
• UL 508 Certified Component: File E69938
• CSA Certified Component: Certificate 1172007
Form-A
IF
ILOAD
10%
90%
ton toff
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
2R03
CPC1706
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Absolute Maximum Ratings @ 25ºC
Parameter Min Max Units
Blocking Voltage - 60 VP
Reverse Input Voltage - 5 V
Input control Current - 50 mA
Peak (10ms) - 1 A
Input Power Dissipation 1- 150 mW
Total Power Dissipation 2- 1600 mW
Isolation Voltage, Input to Output - 2500 Vrms
Operational Temperature -40 +85 °C
Storage Temperature -40 +125 °C
1 Derate linearly 3.33 mW / ºC
2 Derate linearly 16.667 mW / ºC
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current, Continuous IF=5mA, Free air IL--4A
DC
Peak Load Current IF=5mA, t=10ms ILPK --9A
On-Resistance 1IF=5mA, IL=1A RON - 0.07 0.09
Off-State Leakage Current IF=0mA, VL=60VPILEAK --1µA
Switching Speeds
Turn-On IF=5mA, VL=10V ton - 0.5 5 ms
Turn-Off toff - 0.085 2
Output Capacitance IF=0mA, VL=50V, f=1MHz COUT -75 -pF
Input Characteristics
Input Control Current to Activate IL=1A IF- 1.4 5 mA
Input Control Current to Deactivate - IF0.4 - - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Current VR=5V IR- - 10 µA
Input/Output Characteristics
Capacitance Input/Output f=1MHz CI/O -2 -pF
1 Measurement taken within 1 second of on-time.
Electrical Characteristics @ 25ºC
Parameter Conditions Symbol Min Typ Max Units
Thermal Resistance (junction to case) - RJC - 1.5 - °C/W
Thermal Characteristics
INTEGRATED CIRCUITS DIVISION
CPC1706
www.ixysic.com 3
R03
PERFORMANCE DATA*
* The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
Temperature (ºC)
-40 -20 0 20 40 60 80 100
LED Forward Voltage (V)
1.1
1.2
1.3
1.4
1.5
1.6
Typical LED Forward Voltage Drop
vs. Temperature
IF=50mA
IF=20mA
IF=10mA
IF=5mA
LED Forward Current (mA)
0 1020304050
Turn-On Time (Ps)
0
200
400
600
800
1000
1200
Typical Turn-On
vs. LED Forward Current
(IL=75mA)
LED Forward Current (mA)
0 1020304050
Turn-Off Time (Ps)
85
90
95
100
105
Typical Turn-Off
vs. LED Forward Current
(IL=75mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
LED Forward Current (mA)
1.3
1.4
1.5
1.6
1.7
1.8
Typical IF for Switch Operation
vs. Temperature
(IL=1A)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Turn-On Time (Ps)
200
250
300
350
400
450
500
550
600
650
Typical Turn-On vs. Temperature
(IL=75mA)
IF=5mA
IF=10mA
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Turn-Off Time (Ps)
70
80
90
100
110
120
130
Typical Turn-Off vs. Temperature
(IL=75mA)
IF=5mA
IF=10mA
LED Forward Voltage (V)
1.235 1.240 1.245 1.250 1.255 1.260 1.265
Device Count (N)
0
5
10
15
20
25
30
Typical LED Forward Voltage Drop
(N=50, IF=5mA, TA=25ºC)
Turn-On Time (ms)
0.290 0.375 0.460 0.545 0.630 0.715 0.800
Device Count (N)
0
5
10
15
20
25
Typical Turn-On Time
(N=50, IF=5mA, IL=75mA, TA=25ºC)
Turn-Off Time (ms)
0.075 0.080 0.085 0.090 0.095 0.100 0.105
Device Count (N)
0
5
10
15
20
Typical Turn-Off Time
(N=50, IF=5mA, IL=75mA, TA=25ºC)
LED Current (mA)
1.1 1.2 1.4 1.5 1.6 1.8
Device Count (N)
0
5
10
15
20
Typical IF for Switch Operation
(N=50, IL=1A, TA=25ºC)
On-Resistance (:)
0.058 0.062 0.066 0.070 0.074 0.078 0.082
Device Count (N)
0
5
10
15
20
Typical On-Resistance Distribution
(N=50, IF=5mA, IL=1A, TA=25ºC)
Blocking Voltage (VP)
81.0 81.5 82.0 82.5 83.0 83.5 84.0
Device Count (N)
0
5
10
15
20
Typical Blocking Voltage Distribution
(N=50, TA=25ºC)
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
4R03
CPC1706
PERFORMANCE DATA*
* The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifi cations, please
contact our application department.
Temperature (ºC)
-40 -20 0 20 40 60 80 100
On-Resistance (:)
0.05
0.06
0.07
0.08
0.09
0.10
DC-Only On-Resistance
vs. Temperature
(IF=5mA, IL=1A)
Load Voltage (V)
0.00 0.05 0.10 0.15 0.20 0.25 0.30
Load Current (A)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Typical Load Current
vs. Load Voltage
(IF=5mA, TA=25ºC)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Load Current (A)
1.5
2.0
2.5
3.0
3.5
4.0
4.5
Maximum Load Current
vs. Temperature
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Blocking Voltage (VP)
76
78
80
82
84
86
Blocking Voltage vs. Temperature
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Leakage Current (nA)
0
10
20
30
40
50
60
70
Typical Leakage vs. Temperature
Measured Across Pins 3 & 4
(VL=60V)
Load Voltage (V)
0 102030405060
Output Capacitance (pF)
50
100
150
200
250
300
350
400
450
500
Output Capacitance vs. Load Voltage
Time
10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s
Load Current (A)
0
4
8
12
16
Energy Rating Curve
INTEGRATED CIRCUITS DIVISION
CPC1706
www.ixysic.com 5
R03
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to
the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product
evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper
operation of our devices when handled according to the limitations and information in that standard as well as to any
limitations set forth in the information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
CPC1706Y MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
CPC1706Y 245ºC for 30 seconds
Board Wash
IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to
remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as
an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary
if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used.
Cleaning methods that employ ultrasonic energy should not be used.
e3
Pb
INTEGRATED CIRCUITS DIVISION
IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make
changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated
Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its
products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe
property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1706-R03
©Copyright 2012, IXYS Integrated Circuits Division
OptoMOS® is a registered trademark of IXYS Integrated Circuits Division
All rights reserved. Printed in USA.
12/16/2012
For additional information please visit our website at: www.ixysic.com
6
CPC1706
MECHANICAL DIMENSIONS
Dimensions
mm
(inches)
1.150 DIA. x4
(0.045 DIA. x4)
2.540
(0.100)
Pin 1
10.160
(0.400)
5.080
(0.200)
1.75
(0.069)
10.160±0.127
(0.400±0.005)
21.082±0.381
(0.830±0.015)
4.572±0.127
(0.180±0.005)
1.016±0.127
(0.040±0.005)
10.160±0.127
(0.400±0.005)
1.778
(0.070)
5.080±0.127
(0.200±0.005)
2.540±0.127
(0.100±0.005)
0.762±0.076
(0.030±0.003) 1.651±0.102
(0.065±0.004)
7º TYP
4 Places
7º TYP
4 Places
3.302±0.051
(0.130±0.002)
0.381±0.013
(0.015±0.0005)
1.778
(0.070)
PCB Hole Pattern
Pin 1
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
IXYS:
CPC1706Y