1/6
www.rohm.com
○
c 2012 ROHM Co., Ltd. All rights reserved. 2012.08 - Rev.
A
Chip Resistor Networks
MNR Series < Automotive >
Features
1) Can be mounted even more densely than chip resistors.
2) Mounting cost can be reduced by less frequency of mounting times.
3) Convex electrodes secures visual inspection of fillets after soldering.
4) ROHM resistors have obtained ISO9001 / ISO / TS16949 certification.
5) "Automotive" product is AEC-Q200 compliant.
∗Please contact us for status of AEC-Q200 on "General purpose" products.
Part No. Resistance Range Packing
Specification
Quantity / Reel
Type Code
No. of
terminals
No. of
elements
GENERAL
PURPOSE
Paper tape
(2mm Pitch)
Paper tape
(4mm Pitch)
Embossed tape
(4mm Pitch)
1005
×
4
1608
×
2
1608
×
4
1608
×
5
1605
×
8
3216
×
2
3216
×
4
3216
×
5
1Ω to 1MΩ
10Ω to 1MΩ
2.2Ω to 1MΩ
56Ω to 100kΩ
10Ω to 1MΩ
10Ω to 1MΩ
10Ω to 1MΩ
56Ω to 100kΩ
MRAP
10,000
5,000
4,000
ERAP
ERAP
ERRP
ERAP
M0AP
M0AP
E0AP
E0AP
E0RP
E0AP
J0AB
J5AB
J5R
MNR04
MNR12
MNR14
MNR15
MNR18
MNR32
MNR34
MNR35
AUTOMOTIVE
∗Corresponds to
AEC−Q200
1005
×
2
0402
×
4
0402
×
2
0603
×
2
0603
×
4
0603
×
5
0602
×
8
1206
×
2
1206
×
4
1206
×
5
8
42
8
10
16
4
8
10
4
4
4
8
8
2
4
8
210Ω to 1MΩ
MRAP
MNR02
(mm)
Size
(inch)
Part Number Description
MNR
(Chip Resistor Networks)
Resistance code, 3 or 4 digits.
000 denotes jumper type.
Ex.) 1Ω = 1R0
( ±5% )
9.1 Ω = 9R1
( ±5% )
10 Ω = 10R0
( ±1% )
100 ( ±5%
)
1M Ω = 1004 ( ±1%
)
105 ( ±5%
)
02 (1005
[0402]
× 2)
04 (1005
[0402]
× 4)
12 (1608
[0603]
× 2)
14 (1608
[0603]
× 4)
15 (1608
[0603]
× 5)
18 (1605
[0602]
× 8)
32 (3216
[1206]
× 2)
34 (3216
[1206]
× 4)
35 (3216
[1206]
× 5)
F ( ±1% )
J ( ±5% )
(Including jumper type)
Part No. Size (mm [inch]) Resistance Tolerance Nominal ResistanceType Code
0 2 MAP0
NMR J01 5
F
J:
:4 digits
3 digits
Resistance
tolerance Resistance
code
2/6
www.rohm.com
○
c 2012 ROHM Co., Ltd. All rights reserved. 2012.08 - Rev.
A
Data Sheet MNR series < Automotive >
Products List
MNR02 M0AP
MNR04 M0AP
25
Jumper type : Rmax = 50m Ω / Imax. = 1A (Element)
Jumper type : Rmax = 50m Ω / Imax. = 1A (Element)
Jumper type : Rmax = 50m Ω / Imax. = 1A (Element)
Jumper type : Rmax = 50m Ω / Imax. = 1A (Element)
Jumper type : Rmax = 50m Ω / Imax. = 1A (Element)
Jumper type : Rmax = 50m Ωx / Imax. = 2A (Element)
Jumper type : Rmax = 50m Ω / Imax. = 2A (Element)
J(±5%)
25
50
50
12.5
25
200
200
50 100
400
400
−
−
−
−
50
−
E0AP
E0AP
E0RP
E0AP
J0AB
J5AB
J5R
MNR12
MNR14
MNR15
MNR18
MNR32
MNR34
MNR35
+500/−250
±200
1Ω to 9.1Ω
10Ω to 1MΩ
J(±5%)
F(±1%)
J(±5%)
F(±1%)
J(±5%)
J(±5%)
J(±5%)
J(±5%)
J(±5%)
−55 to +155
−55 to +125
E24
±100
±200
±500
10Ω to 1MΩ
10Ω to 1MΩ
E24
E6
E24
E24
E24
E24
E24
E12
±200
±200 56Ω to 100kΩ
10Ω to 1MΩ
10Ω to 1MΩ
±200
±200 10Ω to 1MΩ
56Ω to 100kΩ±200
±100
±200
2.2Ω to 6.8Ω
10Ω to 1MΩ
10Ω to 1MΩ
±200 J(±5%) 10Ω to 1MΩE24
Limiting Element
Voltage
(V)
Maximum
Overload
Voltage
(V)
Temperature
Coefficient
(ppm /
°C
)
Resistance
Tolerance
(%)
Operating
Temperature
Range
(
°C
)
Type Code
Resistance Range SeriesPart No.
0.063 / Element
0.063 / Element
0.063 / Element
0.063 / Element
0.031 / Element
0.063 / Element
0.125 / Element
0.125 / Element
0.063 / Element
Rated Power
(70
°C)
(W)
∗Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product
before using or ordering it.
Circuit Construction
MNR02 / 12 / 32 MNR04 / 14 / 34 MNR15 / 35 MNR18
R1 R1 R2 R3 R1 R2 R3 R4 R5 R6 R7 R8
R2R1 R3 R4
R5 R6 R7 R8
R4
R2
R1=R2=R3=R4R1=R2 R1=R2=R3=R4=R5=R6=R7=R8 R1=R2=R3=R4=R5=R6=R7=R8
3/6
www.rohm.com
○
c 2012 ROHM Co., Ltd. All rights reserved. 2012.08 - Rev.
A
Data Sheet MNR series < Automotive >
MNR02 / 12 / 32 MNR04 / 14 / 34 MNR15 / 35 MNR18
BEBEBB
D
P1 P2 P1 P1 P1
P2 P2
C
A
C
D
C
A
C
D
C
A
CD
C
A
C
Land
R103
L
a
a
a
a
a
a
a
a
a
a
p
LL
pp
L
p
t
tt
t
W
W
WW
c
cc
W
cc
t
b2
b2 b2 b1b1
b2 b1
103 103
L
p
b2 b1
MNR02 / 12 / 32 MNR04 / 14 / 34 MNR15
MNR18 MNR35
Chip Resistor Dimensions and Markings
<Marking method>
There are three digits used for the calculation number
according to IEC code and “R”is used for the decimal point.
MNR35 is R + three digits used for the calculation number
according to IEC code.
Part No. Type Code (mm) L W t a b1 b2 c p
(Unit : mm)
MNR02 M0AP 1005
×
21.0±0.1 1.0±0.1 0.35±0.1 0.2±0.1 −No
M0AP 1005
×
42.0±0.2 1.0±0.1 0.35±0.1 0.2±0.1 0.3±0.1 No
E0AP 1608
×
21.6±0.1 1.6±0.1 0.5±0.1 0.3±0.2 Yes
E0AP 1608
×
43.2±0.1 1.6±0.1 0.5±0.1 0.3±0.2 0.4±0.15 Yes
E0AP 1608
×
53.2±0.1 1.6±0.1 0.5±0.1 0.3±0.1 0.32±0.15 Yes
J5AB 1605
×
83.8±0.1 1.6±0.1 0.45±0.1 0.3±0.2 0.3±0.1 No
E0RP 3216
×
22.6±0.2 3.1±0.2 0.55±0.1 0.5±0.3 −Yes
E0AP 3216
×
45.2±0.4 3.1±0.2 0.55±0.1 0.5±0.3 0.8±0.2 Yes
MNR35 J5R 3216
×
56.4±0.4 3.1±0.2 0.55±0.1 0.5±0.3 0.8±0.2 Yes
−
0.33
+0.1
0
0.4±0.1
0.6±0.15
0.48±0.15
0.3±0.1
1.0±0.2
1.0±0.2
1.0±0.2
0.6±0.15
0.68
0.5
0.8
0.64
0.5
1.27
1.27
1.27
0.8
0.25±0.1
0.25±0.1
0.25±0.15
0.3±0.1
0.3±0.2
0.5Max
0.5Max
0.5Max
0.25±0.15
(inch)
0402
×
2
0402
×
4
0603
×
2
0603
×
4
0603
×
5
0602
×
8
1206
×
2
1206
×
4
1206
×
5
Marking
existence
∗Including jumper type
MNR04
MNR12
MNR14
MNR15
MNR18
MNR32
MNR34
Land pattern Example
A
MNR02
MNR04
MNR12
MNR14
MNR15
MNR18
MNR32
MNR34
MNR35
M0AP 0.5
M0AP
E0AP
E0AP
E0RP
E0AP
J0AB
J5AB
J5R
0.5
1.0
1.0
1.0
1.0
2.1
2.1
2.1
B
0.4
0.4
0.4
0.4
0.48
0.3
0.8
0.8
0.9
C
0.5
0.5
0.8
0.8
0.7
0.7
1.0
1.0
0.8
P2
−
0.55
−
0.8
0.72
−
−
1.27
1.4
D E
−
0.3
−
−
0.32
−
−
0.8
0.7
P1
0.65
0.5
0.8
0.8
0.64
0.5
1.27
1.27
1.3
(Unit : mm)
1.5
1.5
2.6
2.6
2.4
2.4
4.1
4.1
3.7
Dimensions
Part No.
Type Code
4/6
www.rohm.com
○
c 2012 ROHM Co., Ltd. All rights reserved. 2012.08 - Rev.
A
Data Sheet MNR series < Automotive >
± (2.0%+0.1Ω) Max. 50mΩ
± (1.0%+0.05Ω)
± (1.0%+0.1Ω)※MNR35
± (3.0%+0.1Ω)
Max. 50mΩ
Max. 100mΩ
20
°C
Compliance Standard(s) : IEC60115−
8
JISC 5201−
8
Measurement : +20 / −55 / +20 / +125°C
± (3.0%+0.1Ω)
± (3.0%+0.1Ω)
± (1.0%+0.05Ω)
± (1.0%+0.1Ω)※MNR35
± (1.0%+0.1Ω)※MNR35
± (1.0%+0.05Ω)
± (1.0%+0.05Ω)
Max. 100mΩ
Max. 100mΩ
Max. 50mΩ
Max. 50mΩ
Max. 50mΩ
−
Rosin·Ethanol : 25% (weight)
Soldering condition : 235±5
°C
Duration of immersion : 2.0±0.5s
Rated voltage (current) ×2.5, 2s.
Maximum overload voltage
Resistor Type Jumper Type
Resistance
Variation of resistance
with temperature
Solderability
Damp heat, steady state
Endurance at 70°C
Endurance
Rapid change of
temperature
Bend strength of
the end face plating
Resistance to solvent
Resistance to
soldering heat
Overload
Test Items Guaranteed Value Test Conditions
See "Products List"
See "Products List"
Soldering condition : 260±5
°C
Duration of immersion : 10±1s
Test temp. : −55
°C
to +125
°C
5cycle
40°C, 93%RH (Relative Humidity)
Test time : 1,000h to 1,048h
70°C
Rated voltage (current)
1.5h : ON − 0.5h : OFF
Test time : 1,000h to 1,048h
125°C (MNR15 / 18 / 32 / 34 / 35)
155°C (MNR02 / 04 / 12 / 14)
Test time : 1,000h to 1,048h
23±5
°C
, Immersion cleaning, 5±0.5min
Solvent : 2−propanol
A new uniform coating of minimum of
95% of the surface being immersed
and no soldering damage.
No remarkable abnormality on the appearance.
Without mechanical damage such as breaks.
Derating Curve
When the ambient temperature exceeds 70°C, power dissipation must be adjusted according to the derating curves below.
MNR02 / 04 / 12 / 14
0
20
40
60
80
100
−55 0 70 100 155
AMBIENT TEMPERATURE (°C)
PERCENT RATED POWER (%)
Characteristics
Technical data
MNR02
M0AP MNR04
M0AP MNR12
E0AP MNR14
E0AP MNR15
E0RP MNR18
E0AP MNR32
J0AB MNR34
J5AB MNR35
J5R
MΩ1000
Fit
mg/pc
0.0373
1.04
1000 1000 1000 −
2.22 4.04 7.55 7.41
−
8.90
−
15.9
−
31.2
−
38.4
0.0037 0.0400 0.0088 0.4085 0.0175 0.3958 0.2010 1.1996
Parameter Unit
Insulation
resistance
Failure rate
Weight
MNR15 / 18 / 32 / 34 / 35
0
20
40
60
80
100
−55 0 70 100 125
AMBIENT TEMPERATURE (°C)
PERCENT RATED POWER (%)
5/6
www.rohm.com
○
c 2012 ROHM Co., Ltd. All rights reserved. 2012.08 - Rev.
A
Data Sheet MNR series < Automotive >
Tape Dimensions
A
0
P1
P0P2
B0
F
W
K
E
φD
0
Paper Tape
Embossed Tape
1.17±0.1 1.17±0.1
1.2±0.1 2.2±0.1
1.8±0.1 1.8±0.1
1.8±0.1 3.4±0.1
1.8±0.1 3.4±0.1
1.95±0.15 4.1±0.15
WFEA
0
B
0
8.0±0.3 3.5±0.05 1.75±0.1
8.0±0.3 3.5±0.05 1.75±0.1
8.0±0.3 3.5±0.05 1.75±0.1
8.0±0.3 3.5±0.05 1.75±0.1
8.0±0.3 3.5±0.05 1.75±0.1
8.0±0.3 3.5±0.05 1.75±0.1
φ1.5 +0.1
0
φ1.5 +0.1
0
φ1.5 +0.1
0
φ1.5 +0.1
0
φ1.5 +0.1
0
φ1.5 +0.1
0
2.0±0.05 Max 0.5
2.0±0.05 Max 1.1
2.0±0.05
2.0±0.05
2.0±0.05
2.0±0.05
Max 1.1
Max 1.1
Max 1.1
Max 1.1
D
0
P
0
P
1
P
2
T
2
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
2.0±0.1
2.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
3.0±0.1 3.5±0.1
3.4±0.1 5.6±0.1
3.4±0.1 6.6±0.1
WFEA
0
B
0
8.0±0.3 3.5±0.05 1.75±0.1
12.0±0.3 5.5±0.05 1.75±0.1
12.0±0.3 5.5±0.05 1.75±0.1
φ1.5 +0.1
0
φ1.5 +0.1
0
2.0±0.05 0.9±0.1
2.0±0.05 1.0±0.15
2.0±0.05 1.0±0.15
D
0
P
0
P
1
P
2
K
J0AB
J5AB
J5R
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
4.0±0.1
MNR02
MNR04
MNR12
MNR14
MNR15
MNR18
M0AP
M0AP
E0AP
E0AP
E0RP
E0AP
MNR02
MNR04
MNR12
MNR14
MNR15
MNR18
M0AP
M0AP
E0AP
E0AP
E0RP
E0AP
MNR32
MNR34
MNR35
J0AB
J5AB
J5R
MNR32
MNR34
MNR35
φ1.5 +0.1
0
Type CodePart No.
(Unit : mm
)
Type CodePart No.
(Unit : mm
)
Type CodePart No.
Type CodePart No.
T
2
A
0
B
0
Base paper
(Bottom tape)
Components Cavity
Top tape
E
FW
P
0
P
2
P
1
φD
0
6/6
www.rohm.com
○
c 2012 ROHM Co., Ltd. All rights reserved. 2012.08 - Rev.
A
Data Sheet MNR series < Automotive >
Reel Dimensions
Using two kinds of reels for taping. (MNR34/35 applies Fig. 1 only.)
Fig.1
Fig.2
ABCD
φ13±0.2
φ60 +1.0
0
MNR02 M0AP
MNR04 M0AP
MNR12 E0AP
MNR14 E0AP
MNR15 E0RP
MNR18 E0AP
MNR32 J0AB
MNR34 J5AB
MNR35 J5R 13 +1.0
0
9 +1.0
0
0 2
0 4
0 6
0 8
0 2
0 4
0 6
0 8
C
ABD
C
ABD
φ180 0
−1.5
According to EIAJ ET-7200B (RRV
)
According to EIAJ ET-7200B (RRM
)
Label
Label
(Unit : mm
)
Type CodePart No.
R1120A
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
Notice
ROHM Customer Support System
http://www.rohm.com/contact/
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specied herein is subject to change for improvement without notice.
The content specied herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specied in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specied herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specied in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, ofce-automation equipment, commu-
nication devices, electronic appliances and amusement devices).
The Products specied in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, re or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, re control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuel-
controller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specied herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
