FEATURES e ZENER VOLTAGE 3.3V to 200V HIGH SURGE CURRENT CAPABILITY e AVAILABLE IN +5, *MAXIMUM RATINGS Operating Temperature: 65C to +200C DC Power Dissipation: 5 Watts Power Derating: 40 mW/C above 75C Forward Voltage @ 1.0 A: 1.2 Volts +10 or +20% TOLERANCES (Note 1) *ELECTRIGAL CHARACTERISTICS @ 25C MAXIMUM MAXIMUM |, TEST MAXIMUM MAXIMUM MAXIMUM DYNAMIC | MAXIMUM PVouraGE | cusmenr | ompeoance | BVERSE | "CGI | yectace | CURRENT | ytMEEce | eSUREE, | accunaTion TYPE CURRENT oe tt HMPEDANCE | CURRENT NUMBER W2) (ld (22) 1 (Non-Scffix & (Va) (laa) 2, at) OmAl {I {A2) (A&B Suftix) A Suffix) @ Suffix | (B Suffix) ze zsm) | (AGB Suffix} (A & B Suffix) v mA di OHMS uA v v mA OHMS AMPS VOLTS 1N5333B] 3.3 380 3.0 300 1.0 10 1440 400 20 0.85 1N5334B) 3.6 350 25 150 1.0 1.0 1320 500 18.7 0.80 1N53358) 3.9 320 20 50 10 10 1220 500 176 054 1N5336B| 43 290 20 10 0 10 1400 500 16.4 0.49 1N53378| 47 260 20 5.0 10 10 1010 450 15.3 0.44 1N5338B| 5.1 2ac 15 1.0 0 10 930 400 14.4 0.39 1N53398| 56 220 10 10 2.0 2.0 865 400 13.4 0.25 1N5340B| 6.0 200 10 10 30 3.0 730 300 127 0.19 1N5341B| 6.2 200 10 1.0 40 3.0 765 200 124 0.10 1N5342B] 6.8 175 10 10 49 5.2 700 200 15 0.15 1N5343B/ 75 175 15 10 5A 51 630 200 10.7 0.15 1N5344B | 82 150 15 10 59 6.2 580 200 10 0.20 1N53458| 87 150 20 10 6.25 66 545 200 95 0.20 1N53468| 9.1 15 20 75 66 69 520 150 92 0.22 1N5347B| 10 125 20 5.0 12 76 475 125 86 0.22 1N5348B| 11 125 25 5.0 8.0 Ba 430 125 8.0 0.25 1N5349B| 12 100 25 20 86 91 395 125 75 0.25 1N5350B| 13 100 25 1.0 94 99 365 100 7.0 0.25 1N5351B| 14 100 25 10 101 106 340 75 67 0.25 1N5352B| 15 5 25 10 108 15 315 15 6.3 0.25 1N5353B| 16 15 25 10 115 122 295 75 6.0 0.30 1N5354B| 17 7 25 05 122 129 280 1 58 0.35 1N5355B| 18 65 25 05 13 137 264 75 55 0.80 1N5356B| 19 65 3.0 05 137 144 250 75 53 0.40 1N5357B/ 20 65 3.0 05 a4 15.2 237 75 51 0.40 1N53588| 22 50 35 05 158 167 216 75 47 0.45 1N5359B| 24 50 35 05 173 182 198 100 44 0.55 1N5360B| 25 50 40 05 8 19 190 110 43 0.55 1N5361B) 27 50 5.0 05 19.4 206 176 120 41 0.60 1N5362B| 28 50 6.0 0.5 20.1 21.2 170 130 39 0.60 1N53638 30 ac 80 05 2.6 22.8 158 140 37 0.60 1N5364B| 33 ac 10 05 238 25.1 144 150 35 0.60 1N5365B) 36 30 n 05 25.9 274 132 160 33 0.65 1N5366B| 39 36 14 05 23.1 297 122 170 31 0.65 |1N5367B] 43 30 20 05 31 32.7 110 190 28 0.70 JaNs368B| 47 25 25 05 33.8 35.8 100 210 27 0.80 1N5369B| 51 25 27 05 3.2 38.8 93 230 25 0.90 1N53708| 56 20 35 05 40.3 42.6 86 280 23 1.00 1N5371B| 60 2 40 05 43 45.5 79 350 22 1.20 1N5372B| 62 20 42 05 44.6 7.1 76 400 21 1.35 1N5373B| 68 20 44 08 49 517 70 500 2.0 1.50 1N5374B} 75 2 45 05 54 56 63 620 19 1.60 1N5375B| 82 15 65 0.5 59 62.2 58 720 18 1.80 1N5376B| 87 15 5 05 63 66 54.5 760 17 2.00 1N53778| 91 15 75 05 65.8 69.2 525 760 16 2.20 1N5378B} 100 2 90 0.5 R 76 475 800 15 2.30 1N53798} 110 12 125 05 73.2 83.6 B 1000 14 2.50 1N5380B! 120 1c 170 05 85.4 912 395 1150 13 250 1N5381B| 130 Ic 190 05 93.6 98.8 366 1250 12 2.50 1N5382B| 140 8.0 | 230 05 101 106 34 1500 12 250 1N5383B| 150 8.0 330 05 103 114 316 1500 Ll 3.00 1N5384B| 160 8.0 350 0.5 5 122 29.4 1650 11 3.00 1N5385B| 170 8.0 | 380 05 122 129 28 1750 1.0 3.00 1N5386B | 180 50 | 430 05 130, 137 26.4 1750 1.0 4.00 1N5387B/ 190 50 | 450 0.5 137 144 25 1850 09 5.00 1N5388B| 200 5.0 480 0.5 144 152 23.6 1850 09 5.00 *JEDEC Registered Data. 1N5333B thru 1N5388B1N5333B thru 1N5388B NOTE 1 Devices listed have a +5% voltage tolerance on nominal Vz. The suffix A denotes a +10% tolerance and NO SUFFIX de- notes a +20% tolerance. If tighter tolerance is required, consult factory. NOTE 2 Nominal Zener Voltage (Vz) is read with the device in standard test clips with 3/8 to 1/2 inch spacing between clip and case of the diode. Before reading the diode is allowed so stabilize for a period of 40 10 milliseconds at 25C (48, --2C). NOTE 3 The Zener Impedance (Zz+ or Zz) is derived from the 60 Hz ac voltage, which results when an ac current having a rms value equal to 10% of the DC zener current ([z7 or Izi<) is superim- posed on Iz7 or Iz respectively. This specification applies only to +10% and +5% devices. NOTE 4 The Maximum Reverse (leakage) Current is specified for devices with +20% and +10% voltage tolerances on nominal Vz in another column. NOTES The Maximum Zener Current (I[z)4) shown is for +5% toler- ance devices. Izqy for +10% and +20% devices can be calculated using the formula: P Tam =o Vzm where Vz is Vz at the high end of the voltage tolerance specified and P is the rated power of the device. 100 RMS VALUE OF | 60 CPS TEST * CURRENT SET EQUAL TO 10%!, 2 = 1N5335B Ss 10 o =z <= a a = oc 2 10 N 5 1N5342B : ' 1N5338B 4, 10 100 1000 let ZENER CURRENT (mA) FIGURE 3 TYPICAL ZENER IMPEDANCE VS. ZENER CURRENT FOR TYPES SHOWN 4000 1N5350B = 1N5357B i fobla 3 1N5365B =z }t = 100 a S 1N5378B = 3S 1N5388B Loy 10 1. V_ (VOLTS) FIGURE 5 TYPICAL CAPACITANCE VS. 140 REVERSE VOLTAGE FOR 5 WATT ZENERS NOTE 6 The Surge Current (Lzsn) is specified as the maximum peak of a nonrecurrent sine wave of 8.3 milliseconds duration. NOTE 7 Voltage Regulation (AVz) is the difference between the voltage measured at 10% and 50% of [zry. This specification applies only to +10% and +5% devices. Py. MAXIMUM PUWER DISSIPATION (WATTS) T_, Lead temperature (C) 3/8 from body FIGURE 2 POWER DERATING CURVE 1000 RMS VALUE OF 60 CPS TEST CURRENT SET EQUAL TO 10%, 1N5388B | | | 100 10 . 1N5378B Zr1, ZENER IMPEDANCE (OHMS) 1N5365B 1 1NS357B 1.0 10 100 \27 Zener Current (MA) FIGURE 4 TYPICAL ZENER IMPEDANCE VS. ZENER CURRENT FOR TYPES SHOWN 10,000 = 1N5335B 4N5338B ill = 1000 1N5342B zB ao =z =< Ee ao <= a 3S 100 10 A 1.0 10 100 Va (VOLTS) FIGURE 6 TYPICAL CAPACITANCE VS. REVERSE VOLTAGE FOR 5 WATT ZENERS