0.5mm Pitch, 1.0mm above the board Top and Top/Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors FH34SRJ Series 3.8mm Depth :3 .8m m Height : 1.0mm De pth Fig.1 Features Top/Bottom Contact 1. Low-profile With the 1.0mm above the board and width of 3.8mm the connectors are used in space saving applications. 2. Increased FPC/FFC retention As compared with existing similar construction connectors : * In horizontal direction : Approximately 2.6 times higher * In vertical direction : Approximately 2 times higher 3. Unique Back-Flip rotating actuator Top & Bottom contact improves the design flexibility The rotating actuator opens from the back of the connector, assuring reliable electrical and mechanical connection. 4. Easy FPC insertion and reliable electrical connection Proven Flip Lock actuator allows easy insertion of FPC and provides a tactile sensation when fully closed, confirming complete electrical and mechanical connection. 5. Delivered with the actuator open FPC/FPC can be immediately inserted without the need for the opening of the actuator. 6. Accepts standard FPC thickness 0.3mm thick standard Flexible Printed Circuit (FPC) can be used. This is the only ultra-low profile ZIF connector using standard FPC. 7. Conductive traces on the PCB can run under the connector No exposed contacts on the bottom of the connector. 8.Halogen-free Fig.2 FH34SRJ Differential Impedance 130ps rise time 20-80 120 115 110 TGR / TDT / Z Apr.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Prod *N uct len g : Nu mbe th : L=0 r of . pos 5(N-1)+ ition 2.5 s 105 100 95 90 connector 85 FPC S11 Spec * *As defined by IEC61249-2-21 Br-900ppm maximum, Cl-900ppm maximum, Cl + Br combined-1,500ppm maximum 9. Board placement with automatic equipment 80 0 0.5 1 1.5 2 Time(ns) 2.5 Fig.3 Smooth FPC / FFC insertion Flat upper surface and tape and reel packaging facilitate vacuum pick-up and placement. Standard reel packaging contains 5000 connectors. Tapers on all 4 inner walls Fig.4 In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. 2017.5 1 FH34SRJ Series0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Product Specifications Current rating 0.5A (Note 1) Voltage rating 50Vrms AC Ratings Recommended FPC/FFC Storage temperature range : -10 to +50C (Note 3) Storage humidity range : Relative humidity 90% max. (No condensation) Thickness : 0.3 0.03 mm, Gold plated contact pads Item Apr.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Operating temperature range : -55 to +85C (Note 2) Operating humidity range : Relative humidity 90% max. (No condensation) Specification Conditions 1. Insulation resistance 500Mo min. 100V DC 2. Withstanding voltage No flashover or insulation breakdown 250Vrms AC / 1 minute 100mo max. 3. Contact resistance * Including FPC and FFC conductor resistance 1mA, AC / DC 20mV max (AC : 1kHz) 4. Durability Contact resistance : 100mo max. No damage, cracks, or parts dislocation 20cycles 5. Vibration No electrical discontinuity of 1s or longer Contact resistance : 100mo max. No damage, cracks, or parts dislocation Frequency : 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles in each of the 3 axis 6. Shock No electrical discontinuity of 1s or longer Contact resistance : 100mo max. No damage, cracks, or parts dislocation Acceleration of 981m/s2, 6 ms duration, sine halfwave, 3 cycles in each of the 3 axis Contact resistance : 100mo max. 7. Humidity (Steady state) Insulation resistance : 50Mo min. No damage, cracks, or parts dislocation 96 hours at 40C and humidity of 90 to 95% Contact resistance : 100mo max. 8. Temperature cycle Insulation resistance : 50Mo min. No damage, cracks, or parts dislocation Temperature : -55C / +15C to +35C / +85C / +15C to +35C Time: 30 / 2 to 3 / 30 / 2 to 3 minutes 5 cycles 9. Resistance to soldering heat No deformation of components affecting performance Reflow : At the recommended temperature profile Manual soldering: 350C 10C for 5 seconds (Note 3) Note1 : When passing the current through all of the contacts, use 70% of the rated current. Note2 : Includes temperature rise caused by current flow. Note3 : The term "storage" refers to products stored for a long period prior to mounting and use. The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or during transportation after board mounting. Materials / Finish Part Material Finish LCP Color : Gray PA Insulator Remarks UL94V-0 Color : Black LCP(8pos.) Contacts Phosphor bronze Gold plating with nickel barrier Metalfittings Phosphor bronze Pure tin reflow plating Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. FH 34S Series name RJ - 30S : FH Series No. : 34S RJTop and Bottom contact, halogen-free (Flame retardance UL94V-0). Number of Contacts : 4 to 50 2 - 0.5 SH (50) Contact pitch : 0.5mm Termination type SH : SMT horizontal mounting type Specifications (50)...Standard product 5,000 pcs/reel (99)...500 pcs/reel FH34SRJ Series0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Connector Dimensions xNumber of contacts Contact No.1 Apr.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Lot No. Number of contacts indicator Cav No. HRS mark Polarization Mark (0.5) (2.9) (3.8) Note 1 : The coplanarity of each terminal lead within specified dimension is 0.1mm Max. Note 2 : Packaged on tape and reel only. Check packaging specification. Note 3 : Slight variations in color of the plastic compounds do not affect form, fit or function of the connector. Note 4 : After reflow, the terminal plating may change color, however this does not represent a quality issue. Unit : mm Part No. HRS No. No. of Contacts A B C D FH34SRJ-4S-0.5SH(50) 580-1238-7 50 4 4 1.5 2.53 3.38 FH34SRJ-5S-0.5SH(50) 580-1264-7 50 5 4.5 2 3.03 3.88 5 2.5 3.53 4.38 5.5 3 4.03 4.88 FH34SRJ-6S-0.5SH(50) 580-1236-1 50 6 FH34SRJ-7S-0.5SH(50) 580-1200-0 50 7 FH34SRJ-8S-0.5SH(50) 580-1231-8 50 8 6 3.5 4.53 5.38 FH34SRJ-9S-0.5SH(50) 580-1262-1 50 9 6.5 4 5.03 5.88 FH34SRJ-10S-0.5SH(50) 580-1251-5 50 10 7 4.5 5.53 6.38 FH34SRJ-11S-0.5SH(50) 580-1258-4 50 11 7.5 5 6.03 6.88 FH34SRJ-12S-0.5SH(50) 580-1253-0 50 12 8 5.5 6.53 7.38 FH34SRJ-14S-0.5SH(50) 580-1252-8 50 14 9 6.5 7.53 8.38 FH34SRJ-16S-0.5SH(50) 580-1259-7 50 16 10 7.5 8.57 9.38 FH34SRJ-18S-0.5SH(50) 580-1248-0 50 18 11 8.5 9.57 10.38 FH34SRJ-20S-0.5SH(50) 580-1256-9 50 20 12 9.5 10.57 11.38 FH34SRJ-22S-0.5SH(50) 580-1254-3 50 22 13 10.5 11.57 12.38 FH34SRJ-24S-0.5SH(50) 580-1255-6 50 24 14 11.5 12.57 13.38 FH34SRJ-26S-0.5SH(50) 580-1247-8 50 26 15 12.5 13.57 14.38 FH34SRJ-30S-0.5SH(50) 580-1232-0 50 30 17 14.5 15.57 16.38 FH34SRJ-34S-0.5SH(50) 580-1261-9 50 34 19 16.5 17.53 18.38 FH34SRJ-40S-0.5SH(50) 580-1260-6 50 40 22 19.5 20.53 21.38 FH34SRJ-45S-0.5SH(50) 580-1265-0 50 45 24.5 22 23.03 23.88 FH34SRJ-50S-0.5SH(50) 580-1266-2 50 50 27 24.5 25.53 26.38 Tape and reel packaging. Order by number of reels. 3 FH34SRJ Series0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Recommended PCB mounting pattern and metal mask dimensions Recommended PCB Mounting Pattern 0.15 0.065 Connector image : underside 0.185 E0.1 F0.1 PCB mounting pattern image 0.80.03 0.15 0.25 2.9 3.30.05 Contact No.1 0.80.05 Apr.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. X nX 0.1 X 0.650.03 0.30.05 3.30.03 0.80.05 0.5 0.25 B Recommended Stencil Pattern (Recommended Stencil Thickness : t=0.1mm) B Y nX 0.5 0.250.03 0.03 Y E0.03 F0.03 Recommended FPC/FFC Dimensions G0.05 B 0.50.07 0.5 R0 Contact No.1(Top contact) 0.50.07 0.30.03 .2 Z nX 0.03 Z 0.30.03 P 1.50.3 (Uncovered area) Contact No.1(Bottom contact) 2.50.3(Stiffener) 0.1 Note 1 : Dimension P shall be 0.5mm min. Note 2 : The recommended FPC pattern above has been designed only for FH34SRJ series. When using the FPC for FH19SC series (lower contact), uncoverd area shall be 2.50.3mm and stiffener shall be 3.5mm min. Unit : mm Part No. 4 HRS No. No. of Contacts B E F G FH34SRJ-4S-0.5SH(50) 580-1238-7 50 4 1.5 3.1 3.9 2.5 FH34SRJ-5S-0.5SH(50) 580-1264-7 50 5 2 3.6 4.4 3 FH34SRJ-6S-0.5SH(50) 580-1236-1 50 6 2.5 4.1 4.9 3.5 FH34SRJ-7S-0.5SH(50) 580-1200-0 50 7 3 4.6 5.4 4 FH34SRJ-8S-0.5SH(50) 580-1231-8 50 8 3.5 5.1 5.9 4.5 FH34SRJ-9S-0.5SH(50) 580-1262-1 50 9 4 5.6 6.4 5 FH34SRJ-10S-0.5SH(50) 580-1251-5 50 10 4.5 6.1 6.9 5.5 FH34SRJ-11S-0.5SH(50) 580-1258-4 50 11 5 6.6 7.4 6 FH34SRJ-12S-0.5SH(50) 580-1253-0 50 12 5.5 7.1 7.9 6.5 FH34SRJ-14S-0.5SH(50) 580-1252-8 50 14 6.5 8.1 8.9 7.5 FH34SRJ-16S-0.5SH(50) 580-1259-7 50 16 7.5 9.1 9.9 8.5 FH34SRJ-18S-0.5SH(50) 580-1248-0 50 18 8.5 10.1 10.9 9.5 FH34SRJ-20S-0.5SH(50) 580-1256-9 50 20 9.5 11.1 11.9 10.5 FH34SRJ-22S-0.5SH(50) 580-1254-3 50 22 10.5 12.1 12.9 11.5 FH34SRJ-24S-0.5SH(50) 580-1255-6 50 24 11.5 13.1 13.9 12.5 FH34SRJ-26S-0.5SH(50) 580-1247-8 50 26 12.5 14.1 14.9 13.5 FH34SRJ-30S-0.5SH(50) 580-1232-0 50 30 14.5 16.1 16.9 15.5 FH34SRJ-34S-0.5SH(50) 580-1261-9 50 34 16.5 18.1 18.9 17.5 FH34SRJ-40S-0.5SH(50) 580-1260-6 50 40 19.5 21.1 21.9 20.5 FH34SRJ-45S-0.5SH(50) 580-1265-0 50 45 22 23.6 24.4 23 FH34SRJ-50S-0.5SH(50) 580-1266-2 50 50 24.5 26.1 26.9 25.5 FH34SRJ Series0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Recommended FPC construction Contact FPC manufacturer for specific details. 1. Using Single-sided FPC FPC : Flexible Printed Circuit Material Name Covering film layer Material Polyimide 1 mil thick Apr.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating Copper foil Cu Base adhesive Thermosetting adhesive 25 Base film Polyimide 1 mil thick 25 Reinforcement material adhesive Thermosetting adhesive 35 Stiffener 1oz Polyimide 7 mil thick Total 3 35 175 298 FPC : Flexible Printed Circuit Material Material Name Covering layer film Polyimide 1 mil thick Cover adhesive Material Thickness (m) (25) (25) Surface treatment 0.2m thick gold plated over 1 to 5m thick nickel underplating Through-hole copper Cu Copper foil Cu Base adhesive Thermosetting adhesive 18 Base film Polyimide 25 3 15 1/2oz 1 mil thick 18 18 Base adhesive Cu Cover adhesive Thermosetting adhesive 25 Covering film layer Polyimide 1 mil thick 25 Reinforcement material adhesive Thermosetting adhesive 50 * To prevent release of the FPC due to its bending, use of the double sided FPC with copper foil on the back side is not recommended. 1/2oz (18) Copper foil Stiffener 3. Using FFC 25 25 Cover adhesive 2. Using Double-sided FPC Material Thickness (m) Polyimide 4 mil thick Total 100 297 FFC : Flexible Flat Cable Material Name Material Polyester film Adhesive (12) Thermoplastic polyester (30) 35 Gold plated annealed copper foil Adhesive Material Thickness (m) Polyester 30 12 Polyester Adhesive Polyester 30 Stiffener Polyester 188 Total 295 * tolerance of 20m. 1. This specification is a recommendation for the construction of the FH34SRJ Series FPC and FFC (t=0.3 0.03). 2. For details about the construction, please contact the FPC/FFC manufacturers. 5 FH34SRJ Series0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Packaging Specification Embossed Carrier Tape Dimensions Embossed Carrier Tape Dimensions 2 +0.1 0 J0.1 O1.5 80.1 1.95 0.3 40.1 2 .1 +0 5 0 O1. J0.1 K0.1 H0.3 80.1 40.1 1.750.1 (Tape width 32mm min.) 32mm MIN H0.3 24mm MAX 1.95 0.3 1.750.1 (Tape width 24mm max.) +0.1 Direction of unreeling Reel Dimensions 1.5 0 Apr.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. (L : Inside) 1.7 +0.15 0 Direction of unreeling Direction of unreeling O380 O80 O13 (M : Outside) 400mm MIN(Leader) 1600mm MIN (TrailerEmpty) Embossed carrier tape 100mm MIN (Empty) Top cover tape Unit : mm Part No. J K No. of Contacts 580-1238-7 50 4 - FH34SRJ-5S-0.5SH(50) 580-1264-7 50 5 - FH34SRJ-6S-0.5SH(50) 580-1236-1 50 6 - FH34SRJ-7S-0.5SH(50) 580-1200-0 50 7 FH34SRJ-8S-0.5SH(50) 580-1231-8 50 8 FH34SRJ-9S-0.5SH(50) 580-1262-1 50 9 - FH34SRJ-10S-0.5SH(50) 580-1251-5 50 10 - FH34SRJ-11S-0.5SH(50) 580-1258-4 50 11 - FH34SRJ-12S-0.5SH(50) 580-1253-0 50 12 - FH34SRJ-14S-0.5SH(50) 580-1252-8 50 14 - FH34SRJ-16S-0.5SH(50) 580-1259-7 50 16 - FH34SRJ-18S-0.5SH(50) 580-1248-0 50 18 FH34SRJ-20S-0.5SH(50) 580-1256-9 50 20 FH34SRJ-22S-0.5SH(50) 580-1254-3 50 22 - FH34SRJ-24S-0.5SH(50) 580-1255-6 50 24 - FH34SRJ-26S-0.5SH(50) 580-1247-8 50 26 - FH34SRJ-4S-0.5SH(50) 6 H HRS No. FH34SRJ-30S-0.5SH(50) 580-1232-0 50 30 FH34SRJ-34S-0.5SH(50) 580-1261-9 50 34 FH34SRJ-40S-0.5SH(50) 580-1260-6 50 40 FH34SRJ-45S-0.5SH(50) 580-1265-0 50 45 FH34SRJ-50S-0.5SH(50) 580-1266-2 50 50 16 24 7.5 11.5 - - - - L M 17.4 21.4 25.4 29.4 32 14.2 28.4 33.4 37.4 44 20.2 40.4 45.4 49.4 FH34SRJ Series0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Temperature Profile MAX 250c 250 Temperature(c) 230c 200 Solder method : Reflow, IR/hot air Environment : Room air Solder composition : Paste, 96.5%Sn/3.0%Ag/0.5%Cu (Senju Metal Industry, Co., Ltd.'s Part 200c Number: M705-221CM5-42-10.5) 150 Test board 150c : Glass epoxy 18.3mm32.85mm0.8mm thick 100 Apr.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. HRS test condition Land dimensions : 0.3mm0.8mm Metal mask : 0.250.650.1mm thick The temperature profiles shown are based on the above 50 25c (60 sec.) 0 conditions. 90 to 120 sec. Preheating (60 sec.) Soldering In individual applications the actual temperature may vary, depending on solder paste type, volume / thickness Start and board size / thickness. Consult your solder paste and Time (Seconds) equipment manufacturer for specific recommendations. 7 FH34SRJ Series0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Operation and Precautions Exercise care when handling connectors. Follow recommendations given below. Operation Caution : Handle connectors carefully, as they are very small and thin. Please refer to this section for verification of the following points: 1. As delivered The actuator packaged in the open condition. Delivered with the actuator open. There is no need to operate the actuator prior to inserting the FPC/FFC. Apr.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Precautions Do not close the actuator without the FPC/FPC inserted. 2. FPC/FFC insertion Be sure that the FPC is parallel to the surface of the PCB, then completely insert into the connector. Caution Do not attempt to insert the FPC if actuator is closed. If the actuator is closed and if the FPC is twisted during insertion, it can cause contact deformation and / or contact failure. Actuator close Actuator open FPC FPC PCB PCB 3. FPC/FFC insertion (The top contact specification) Insert the FPC/FFC with the conductive surfaces facing up. Align the FPC/FFC straight with the connector and insert it firmly all the way. Boundary of FPC pattern Edge of housing opening Proper insertion 8 Skewed insertion Shallow insertion FH34SRJ Series0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Operation and Precautions Operation 4. Locking Apr.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. After FPC/FFC insertion, rotate the actuator down to a full stop, pushing it at the center. Do not press down on the actuator or housing Rotate Do not rotate the actuator by the ends Lift at the center 5. FPC/FFC removal (Lock release) Carefully rotate the actuator up to 90, lifting it at the center. Flip actuator up to open Lift at the center Do not apply force to the actuator in the direction shown when it is fully open. Opening to an angle greater than 90C will break or damage the connector. Do not rotate the actuator by the ends * This connector uses a back flip type structure. The insert direction of the FPC and the actuator are different from front flip type connectors. Do not to try to open the actuator from the FPC side. 9 FH34SRJ Series0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Operation and Precautions Operation 6. FPC routing Apr.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. FPC should be routed in a manner that no strain or load is exerted onto the FPC. Placing any strain on the FPC may result in unintentional disconnect or damage to the FPC, which can lead to issues such as contact failure. Caution Do not allow the FPC or stiffener to touch the casings, housings or any other items. When routing the FPC, make sure that no strain or load is applied to the connector in a pulling, pushing or side-to-side motion. Additionally, make sure that no excessive upward or downward force is applied to the connector. When routing the FPC, make sure that there is a stress free path for the FPC and the stiffener is parallel to the PCB. Observe correct bend radiuses. e FPC routing. Do not place or mount any parts that will interfere with the PCB FPC Stiffener film PCB FPC PCB Component part 10 Stiffener film FH34SRJ Series0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors Operation and Precautions Precautions when mounting connectors on the PCB SHandling before mounting on PCB Insertion of the FPC/FFC or operation of the actuator prior to mounting on the PCB is not recommended. SPC board warpage Minimize the warpage as much as possible. The connector are straight within 0.1 mm max. Make sure that the mounting area flatness can accept the connector terminals without causing any failure of the solder joints. Apr.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. SForces on the board SWhen braking the large PC board into individual boards exercise care not to damage the installed connectors. SWhen attaching the boards or other components with the screws make sure that any stresses will not cause board deflections affecting the mounting areas of the connector. Connectors PCB SWhen hand soldering: * Do not perform hand soldering with the FPC inserted in the connector. * Do not apply excessive heat or touch the soldering iron anywhere other than the connector leads. * Do not use excessive amount of solder or flux compounds. Operation of the actuator or contacts may be affected by excessive amounts of solder or flux compounds. 11 Apr.1.2019 Copyright 2019 HIROSE ELECTRIC CO., LTD. All Rights Reserved. FH34SRJ Series0.5mm Pitch, 1.0mm above the board Top and Top Bottom Contact, Back-Flip Actuator Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE 2300 Warrenville Road, Suite 150, Downers Grove, IL 60515 Phone : +1-630-282-6700 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE 2841 Junction Ave, Suite 200 San Jose, CA. 95134 Phone : +1-408-253-9640 Fax : +1-408-253-9641 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) 17197 N. Laurel Park Drive, Suite 253, Livonia, MI 48152 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE 300 Brickstone Square Suite 201, Andover, MA 01810 Phone : +1-978-662-5255 THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : +31-20-6557460 Fax : +31-20-6557469 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Schoenbergstr. 20, 73760 ostfildern Phone : +49-711-456002-1 Fax : +49-711-456002-299 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE Neumeyerstrasse 22-26, 90411 Nurnberg Phone : +49-911 32 68 89 63 Fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE Bayernstr. 3, Haus C 30855 Langenhagen, Germany Phone : +49-511 97 82 61 30 Fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE Regus La Garenne Colombes,Place de La Belgique, 71 Boulevard National La Garenne Colombes, 92250, France Phone : +33 (0) 1 7082 3170 Fax : +33 (1) 7082 3101 http://www.hirose.com/eu/ UNITED KINGDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH) 4 Newton Court, Kelvin Drive, Knowlhill, Milton Keynes, MK5 8NH Phone : +44-1908 202050 Fax : +44-1908 202058 http://www.hirose.com/eu/ CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 18, Enterprise Center Tower 2, 209# Gong He Road, Jing'an District, Shanghai, CHINA 200070 Phone : +86-21-6391-3355 Fax : +86-21-6391-3335 http://www.hirose.com/cn/ CHINA: HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose.com/cn/ CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre, 5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008 Phone : +86-755-8207-0851 Fax : +86-755-8207-0873 http://www.hirose.com/cn/ HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +852-2803-5338 Fax : +852-2591-6560 http://www.hirose.com/hk/ TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7350 http://www.hirose.com/tw/ KOREA: HIROSE KOREA CO.,LTD. 250, Huimanggongwon-ro, Siheung-si, Gyeonggi-do, Korea, 15083 Phone : +82-31-496-7000 or 7124 Fax : +82-31-496-7100 http://www.hirose.co.kr/ SINGAPORE: INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE HIROSE ELECTRIC SINGAPORE PTE. LTD. 10 Anson Road #26-16, International Plaza Office NO.552, Regus-Green Boulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India 079903, Singapore Phone : +91-12-660-8018 Phone : +65-6324-6113 Fax : +91-120-4804949 Fax : +65-6324-6123 http://www.hirose.com/sg/ http://www.hirose.com/sg/ INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma Gandhi (MG) Road, Bangalore 560 001, Karnataka, India Phone : +91-80-4120 1907 Fax : +91-80-4120 9908 http://www.hirose.com/sg/ MALAYSIA: PENANG REPRESENTATIVE OFFICE 1-21-01, Suntech @ Penang Cybercity (1164), Lintang Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Phone : +604-619-2564 Fax : +604-619-2574 http://www.hirose.com/sg/ (R) 12 THAILAND: BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +66-2-686-1255 Fax : +66-2-686-3433 http://www.hirose.com/sg/ 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 05/2017. Contents are subject to change without notice for the purpose of improvements.