INCH-POUND MIL-DTL-83723/73F 19 August 2009 SUPERSEDING MIL-DTL-83723/73E 20 October 2000 DETAIL SPECIFICATION SHEET CONNECTOR, ELECTRIC, (CIRCULAR, ENVIRONMENT RESISTING), RECEPTACLE, (SINGLE HOLE MOUNT, BAYONET COUPLING, CRIMP SOCKET CONTACT) (SERIES III, CLASSES A, G, M, R, T, W AND Z) This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-83723. FIGURE 1. Dimensions and configurations. AMSC N/A FSC 5935 Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:03Z Check the source to verify that this is the current version before use. MIL-DTL-83723/73F FIGURE 1. Dimensions and configurations - Continued. 2 Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:03Z Check the source to verify that this is the current version before use. MIL-DTL-83723/73F Shell size 8 B 10 12 14 16 .137 (3.48) .097 (2.46) 18 20 22 24 .168 (4.27) .128 (3.25) C D max .428 .312 (10.87) (7.92) .433 (11.00) .530 .388 (13.46) (9.86) .535 (13.59) .700 .558 (17.78) (14.17) .705 (17.91) .769 .627 (19.53) (15.93) .774 (19.66) .869 .772 (22.07) (19.61) .901 (22.89) 1.002 .860 (25.45) (21.84) 1.007 (25.58) 1.127 .985 (28.63) (25.02) 1.132 (28.75) 1.252 1.110 (31.80) (28.19) 1.257 (31.93) 1.377 1.235 (34.98) (31.37) 1.382 (35.10) F G N max thread .561 .536 .625 20UN-2A (14.25) (13.61) .531 (13.49) .696 .659 (17.68) (16.74) .654 (16.61) .875 .829 (22.23) (21.06) .824 (20.93) .935 .898 (23.75) (22.81) .893 (22.68) 1.062 1.025 (26.97) (26.04) 1.020 (25.91) 1.187 1.131 (30.15) (28.73) 1.126 (28.60) 1.312 1.256 (33.32) (31.90) 1.251 (31.78) 1.437 1.381 (36.50) (35.08) 1.376 (34.95) 1.562 1.506 (39.67) (38.25) 1.501 (38.13) .750 20UNEF-2A .9375 20UNEF-2A 1.000 20UNEF-2A 1.125 20UNEF-2A 1.250 20UNEF-2A 1.375 20UNEF-2A 1.500 20UNEF-2A 1.625 20UNEF-2A FIGURE 1. Dimensions and configurations - Continued. 3 Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:03Z Check the source to verify that this is the current version before use. MIL-DTL-83723/73F W max EE FF JJ .979 (24.87) S +.005 -.000 .508 (12.90) 1.068 (27.13) .605 (15.37) .635 (16.13) .796 (20.22) 1.104 (28.04) .636 (16.15) 1.192 (30.28) .730 (18.54) .760 (19.30) 12 .984 (24.99) 1.291 (32.79) .806 (20.47) 1.380 (35.05) .917 (23.29) .947 (24.05) 14 1.046 (26.57) 1.391 (35.33) .875 (22.23) 1.505 (38.23) .980 (24.89) 1.010 (25.65) 16 1.171 (29.74) 1.516 (38.51) 1.002 (25.45) 1.630 (41.40) 1.105 (28.07) 1.135 (28.83) 18 1.296 (32.92) 1.641 (41.68) 1.108 (28.14) 1.756 (44.60) 1.229 (31.22) 1.260 (32.00) 20 1.484 (37.69) 1.766 (44.86) 1.233 (31.32) 1.860 (47.24) 1.354 (34.39) 1.385 (35.18) 22 1.609 (40.87) 1.954 (49.63) 1.358 (34.49) 2.086 (52.98) 1.479 (37.57) 1.510 (38.35) 24 1.734 (44.04) 2.079 (52.81) 1.483 (37.67) 2.160 (54.86) 1.604 (40.74) 1.635 (41.53) .596 (15.14) .590 (14.99) .721 (18.31) .715 (18.16) .908 (23.06) .902 (22.91) .971 (24.66) .965 (24.51) 1.096 (27.84) 1.090 (27.69) 1.220 (30.99) 1.214 (30.84) 1.345 (34.16) 1.339 (34.01) 1.470 (37.34) 1.464 (37.19) 1.595 (40.51) 1.589 (40.36) Shell size U V 8 .670 (17.02) 10 FIGURE 1. Dimensions and configurations - Continued. 4 Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:03Z Check the source to verify that this is the current version before use. MIL-DTL-83723/73F Inches mm Inches mm Inches mm Inches mm Inches mm .0025 .005 .008 .015 .018 .020 .022 .032 .042 .046 .052 .065 .069 .071 .072 .076 .084 .089 .090 .094 .097 .101 .106 .112 0.06 0.13 0.20 0.38 0.46 0.51 0.56 0.81 1.07 1.17 1.32 1.65 1.75 1.80 1.83 1.93 2.13 2.26 2.29 2.39 2.46 2.57 2.69 2.84 .120 .125 .138 .144 .149 .198 .204 .211 .250 .259 .312 .366 .376 .378 .380 .388 .392 .428 .433 .490 .508 .530 .531 .535 3.05 3.18 3.51 3.66 3.78 5.03 5.18 5.36 6.35 6.58 7.92 9.30 9.55 9.60 9.65 9.86 9.96 10.87 11.00 12.45 12.90 13.46 13.49 13.59 .536 .540 .558 .560 .561 .594 .627 .636 .654 .659 .696 .700 .705 .708 .719 .728 .769 .772 .774 .806 .812 .824 .829 .860 13.61 13.72 14.17 14.22 14.25 15.09 15.93 16.15 16.61 16.74 17.68 17.78 17.91 17.98 18.26 19.49 19.53 19.61 19.66 20.47 20.62 20.93 21.06 21.84 .875 .893 .896 .898 .901 .906 .935 .937 .969 .985 1.002 1.007 1.020 1.025 1.062 1.070 1.108 1.125 1.126 1.127 1.131 1.132 1.156 1.187 22.23 22.68 22.76 22.81 22.89 23.01 23.75 23.80 24.61 25.02 25.45 25.58 25.91 26.04 26.97 27.18 28.14 28.58 28.60 28.63 28.73 28.75 29.36 30.15 1.233 1.235 1.250 1.251 1.252 1.256 1.257 1.312 1.343 1.375 1.376 1.377 1.381 1.382 1.385 1.437 1.483 1.501 1.506 1.562 1.703 31.32 31.37 31.75 31.78 31.80 31.90 31.93 33.32 34.11 34.93 34.95 34.98 35.08 35.10 35.18 36.50 37.66 38.13 38.25 39.67 43.26 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Unless otherwise specified, tolerances are .005 (0.13 mm) for three place decimals, .01 (0.25 mm) for two place decimals and 1 for all angles. 4. Rear accessory interchangeability dimensions shall be accordance with SAE-AS85049. 5. The centerline of indicated projection must be located on vertical centerline 2. 6. See table I for contact cavities requiring this dimension. FIGURE 1. Dimensions and configurations - Continued. 5 Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:03Z Check the source to verify that this is the current version before use. MIL-DTL-83723/73F REQUIREMENTS: Dimensions and configurations: See figure 1. For insert arrangements, see MIL-STD-1554 and table I. TABLE I. Inserts requiring reduced diameters for lead-in chamfers on contact cavities. Shell Insert arrangements Contact cavities 8 03 1, 2, 3 10 06 1, 2, 3, 4, 5, 6 For connector accessories: See SAE-AS85049. This connector mates with MIL-DTL-83723/76 and /78. Part or Identifying Number (PIN) example: M83723/ 73 R 22 55 N Military designation Specification sheet number Class Shell size Insert arrangement Polarizing position Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-83723, this document references the following: MS3186 MIL-DTL-83723/76 MIL-DTL-83723/78 MIL-STD-1554 SAE-AS85049 6 Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:03Z Check the source to verify that this is the current version before use. MIL-DTL-83723/73F CONCLUDING MATERIAL Custodians: Army - CR Navy - AS Air Force - 85 DLA - CC Preparing activity: DLA - CC (Project 5935-2008-175) Review activities: Army - AR, AV, MI Navy - EC Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil. 7 Source: https://assist.dla.mil -- Downloaded: 2018-10-13T10:03Z Check the source to verify that this is the current version before use.