P2 Flush Pull 510 Low profile * Lift or pull * Single hole mount * Snap-in installation * 2 sizes Small 82.5 (3.25) Small P2 5.5 (.21) 17 (.65) R 1.5 (.06) Material and Finish ABS plastic, black 25.5 (1.00) Performance Details 35.8 (1.41) 40 (1.58) Maximum static load: Lifting / pulling: 1300 N (300 lbf) 1.8 (.07) Door thickness (see table) Pushing / sliding: 450 N (100 lbf) ACTUAL SIZE Large 127.3 (5.01) Large P2 Flammability rating: UL94-HB or UL94-V0 R 1 (.040) Operating temperature range: -50C (-60F) to 60C (140F) Textured matte finish Notes ACTUAL SIZE Performance details are based on installation in a 1.2 (.048) thick steel door. Maximum loads are limited by door strength. 1320.3 (5.20.01) Larger P2 87.50.3 (3.45.01) Smaller P2 30.70.15 (1.210.005) R Max. 1.5 (.06) Part Number Selection __________________________________________________________________________________ Part Number Door Thickness Range Small Min. Max. UL94-HB UL94-V0 UL94-HB UL94-V0 1.0 (.040) 1.4 (.055) P2-41 P2-41-1 P2-51 P2-51-1 1.4 (.055) 1.8 (.070) P2-42 P2-42-1 P2-52 P2-52-1 1.8 (.070) 2.1 (.085) P2-43 P2-43-1 P2-53 P2-53-1 2.1 (.085) 2.5 (.100) P2-44 P2-44-1 P2-54 P2-54-1 Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/P2 Large Dimensions in millimeters (inch) unless otherwise stated P2 Flush Pull - Lockable 511 Low profile * Lift or pull * Single hole mount Type B (Counter-Clockwise) Version Shown 31.85 (1.25) 116.2 (4.57) Door 82.3 (3.24) 8.3 (0.33) 38.8 (1.53) 25.3 (1) 35.5 (1.4) Cam shown in locked position * 2 (0.08) Typical Wall Thickness Cam forward No Offset (Straight) Cam Cam reversed Material and Finish Pull: ABS plastic, black Door Thickness (see table) Cam Grip * Snap-in installation * Lockable * Lock core included or sold separately * Cam sold separately Frame Flammability Rating UL94-HB or UL94-VO (See table) 23 (0.91) Cam Forward Grip Cam Reversed Grip Cam Offset 25 (0.98) 25 (0.98) No Offset * Cam Ordered Separately 21.8 (0.86) 28.2 (1.11) 3.2 (1.25) For Cam Part Numbers and options see our Handbook page 167 or www.southco.com 18.6 (0.73) 31.4 (1.24) 6.4 (.250) 15.5 (0.61) 34.5 (1.36) 9.5 (.375) Cam Length Lock parts: Zinc alloy, powder coated. Brass. Steel, zinc plated. Buna-N Notes For pulls without lock core, lock core sold separately, see page 158. Cam sold separately. See page 167. Frame 110 +/- 0.3 (4.33 +/-0.012) 11 +/- 0.3 (0.433 +/-0.012) 30.7 +/- 0.3 (1.21 +/- 0.012) 4x R 1.5 (.06) Door ___________________________________________________________________________ Part Number Selection D 1 2 3 4 R 1 2 Door Thickness Range 1.0 (.040) - 1.4 (.055) 1.4 (.055) - 1.8 (.070) 1.8 (.070) - 2.1 (.085) 2.1 (.085) - 2.5 (.100) Rotation Type A (Clockwise to lock) Type B (Counter-Clockwise to lock) M 1 2 Material UL94-V0 PC/ABS UL94-HB ABS P2 - 4 D M - R L L 2 9 Lock Style With lock core, keyed alike CH751 (with two flat keys supplied) Without lock core (See our handbook page 183 or visit www.southco.com) Dimensions in millimeters (inch) unless otherwise stated Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/P2 PK Lock Cores 159 SOUTHCO Key-Choice System (R) Lock Cores - Disc Tumbler Lock Core Part Number Keying Key code Bag qty Shuttered stainless steel scalp Non shuttered stainless steel scalp Non shuttered black powder coated Non shuttered chrome plated KA CH751 1 PK-39-72-13-KCH751 PK-132-13 PK-115-13 PK-116-13 KA RS001 1 PK-39-72-13-RS001 PK-132-13-RS001 PK-29-15-13-RS001 PK-29-16-13-RS001 KD 10 CODES 10 PK-39-72-13-KD1010 PK-132-13-KD1010 PK-29-15-13-KD1010 PK-29-16-13-KD1010 KD 50 CODES 50 PK-39-72-13-KD1050 PK-132-13-KD1050 PK-29-15-13-KD1050 PK-29-16-13-KD1050 KD 125 CODES 125 PK-39-72-13-KD1125 PK-132-13-KD1125 PK-29-15-13-KD1125 PK-29-16-13-KD1125 MKKD 10 CODES 10 PK-39-72-13-MK1010 PK-132-13-MK1010 PK-29-15-13-MK1010 PK-29-16-13-MK1010 MKKD 50 CODES 50 PK-39-72-13-MK1050 PK-132-13-MK1050 PK-29-15-13-MK1050 PK-29-16-13-MK1050 MKKD 125 CODES 125 PK-39-72-13-MK1125 PK-132-13-MK1125 PK-29-15-13-MK1125 PK-29-16-13-MK1125 Keys Part Number Keys Part Number Master Key (1) PK-24-01 CH751 PK-10-01 Control (Removal) Key (1) PK-11-03 RS001 PK-10-01-RS001 Lock Cores - Tool Operable Lock Core Part Number Key code selection KA - Keyed Alike: All lock cores are the same key code KD - Keyed Differently: Multiple key codes provided in a nonmaster key system MKKD - Master Keyed, Keyed Differently: Multiple key codes provided in a master key system Phillips recess Slotted 4 mm Hex recess 8 mm Hex recess Chrome plated PK-0-34027-01 PK-0-43489-01 PK-0-34323-01 PK-0-40374-01 Notes Black powder coated PK-0-34027-50 PK-0-43489-50 PK-0-34323-50 PK-0-40374-50 Part Number includes 1 lock core and 2 keys Head Style Lock Core Installation for CM-3 and CM-6 only (see page 164) Installation Notes 01 (Clockwise) Ramped area of housing Flats of lock extender Lock Core Installed (01 Rotation) Locked Position Unlocked Position Southco logo on this side of housing 09 (Counter-Clockwise) Lock Core Installed (09 Rotation) Locked Position Unlocked Position Southco logo on this side of housing 1. Prepare panel and install latches shown on page 164. 2.Latch should be in unlatched position. The flats of the lock extender should be aligned with the flats on the housing. 3.Take a lock core and orient the brass wafers to the internal ramped area of the housing. Push lock core into housing until it stops. 4. Insert key into lock core and turn to verify lock core is fully seated and operating properly. 5. Install cam. Other options available. For complete details on variety, part numbers, installation and specification, go to Dimensions in millimeters (inch) unless otherwise stated www.southco.com/PK CM Cam Locks 167 Cams & installation Sealing washer (if included) Mounting nut 16.25 / 16.35 (.640 / .644) Door Frame Installation Notes 1. Place sealing washer onto housing (if included) and put through the mounting hole (see panel preparation). Housing Door 2. Install mounting nut and tighten to 5 Nm (44 inlbf). Screw & lock washer Cam 3. Install cam to assembly Properly orientate for rotation and grip. O 190.2 (.75.007) Stop washer 4. Install screw. Tighten to 4 Nm (35 inlbf). Max. door thickness (see table page 187) ACTUAL SIZE #10 Material and Finish Cam: Steel plated C Offset C Offset CC Offset Offset C Offset C Offset 2 (.079) 2 (.079) LL Length Length LL Length Length 16 16 (.62) (.62) LL Length Length SS CC -- No SS HH -- Hook SS LL -- Hook Hook type type 11 No hook hook Hook type type 22 ___________________________________________________________________________ Part Number Selection S C H L Style No hook Hook type 1 Hook type 2 C 0 2 4 6 Cam Offset No offset 3.2 (.125) 6.4 (.250) 9.5 (.375) See table Order lock and cam separately Cam part number (no lock) For Lock selection see pages 164-166 CM - S C L L Length 06 19 (.75) 10 31.8 (1.25) 14 44.5 (1.75) Dimensions in millimeters (inch) unless otherwise stated Other options available. For complete details on variety, part numbers, installation and specification, go to www.southco.com/CM