26MT../36MT.. Series Vishay High Power Products Three Phase Bridge (Power Modules), 25/35 A FEATURES * Universal, 3 way terminals: push-on, wrap around or solder * High thermal conductivity package, electrically insulated case * Center hole fixing * Excellent power/volume ratio * UL E300359 approved * Gold plated terminals solderable using lead (Pb)-free solder; solder alloy Sn/Ag/Cu (SAC305); solder temperature 260 to 275 C * RoHS compliant * Designed and qualified for industrial and consumer level D-63 DESCRIPTION A range of extremely compact, encapsulated three phase bridge rectifiers offering efficient and reliable operation. They are intended for use in general purpose and instrumentation applications. PRODUCT SUMMARY IO 25/35 A MAJOR RATINGS AND CHARACTERISTICS SYMBOL IO IFSM I2 t CHARACTERISTICS 26MT 36MT UNITS 25 35 A TC 70 60 C 50 Hz 360 475 60 Hz 375 500 50 Hz 635 1130 60 Hz 580 1030 A A2 s VRRM 100 to 1600 V TJ - 55 to 150 C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 10 100 150 20 200 275 40 400 500 60 600 725 80 800 900 100 1000 1100 120 1200 1300 140 1400 1500 160 1600 1700 26MT../36MT.. Document Number: 93565 Revision: 03-Nov-08 For technical questions, contact: ind-modules@vishay.com IRRM MAXIMUM AT TJ MAXIMUM mA 2 www.vishay.com 1 26MT../36MT.. Series Vishay High Power Products Three Phase Bridge (Power Modules), 25/35 A FORWARD CONDUCTION VALUES PARAMETER SYMBOL Maximum DC output current at TC IO TEST CONDITIONS t = 8.3 ms IFSM t = 10 ms I2t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2t for fusing I2t 25 35 A 70 60 C No voltage reapplied 360 475 375 500 300 400 A t = 10 ms t = 8.3 ms Maximum I2t for fusing 36MT 120 rect. conduction angle t = 10 ms Maximum peak, one-cycle non-repetitive forward current UNITS 26MT I2t for time tx = 100 % VRRM reapplied No voltage reapplied Initial TJ = TJ maximum 100 % VRRM reapplied I2t x tx; 0.1 tx 10 ms, VRRM = 0 V 314 420 635 1130 580 1030 450 800 410 730 6360 11 300 Low level of threshold voltage VF(TO)1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ maximum 0.88 0.86 High level of threshold voltage VF(TO)2 ( I > x IF(AV)), TJ maximum 1.13 1.03 A2s A2s V Low level forward slope resistance rt1 (16.7 % x x IF(AV) < I < x IF(AV)), TJ maximum 7.9 6.3 High level forward slope resistance rt2 ( I > x IF(AV)), TJ maximum 5.2 5.0 1.26 m Maximum forward voltage drop VFM TJ = 25 C, IFM = 40 Apk - per single junction Maximum DC reverse current IRRM TJ = 25 C, per junction at rated VRRM 100 1.19 A V RMS isolation voltage VINS TJ = 25 C, all terminal shorted; f = 50 Hz, t = 1 s 2700 V THERMAL - MECHANICAL SPECIFICATIONS VALUES PARAMETER SYMBOL TEST CONDITIONS UNITS 26MT 36MT Maximum junction and storage temperature range TJ, TStg Maximum thermal resistance, junction to case RthJC DC operation per bridge (based on total power loss of bridge) 1.42 1.35 Maximum thermal resistance, case to heatsink RthCS Mounting surface, smooth, flat and greased 0.2 0.2 - 55 to 150 Approximate weight Mounting torque 10 % www.vishay.com 2 Bridge to heatsink with screw M4 For technical questions, contact: ind-modules@vishay.com C K/W 20 g 2.0 Nm Document Number: 93565 Revision: 03-Nov-08 26MT../36MT.. Series Three Phase Bridge (Power Modules), 25/35 A Instantaneous Forward Current (A) 160 Maximum Allowable Case Temperature (C) 26MT.. Series 140 120 100 + 120 (rect.) ~ 80 - 60 0 5 10 15 20 25 1000 26MT.. Series 100 Per junction 10 TJ = 25 C TJ = 150 C 1 30 0 1.0 0.5 1.5 2.0 2.5 3.0 3.5 4.0 Total Output Current (A) Instantaneous Forward Voltage (V) Fig. 1 - Current Ratings Characteristics Fig. 2 - Forward Voltage Drop Characteristics 55 26MT.. Series TJ = 150 C 50 10 K/W 25 20 R - 5 15 10 30 W 10 2K /W 3K /W 4K /W 5K /W 7 K/ W 35 K/ 15 40 7 20 K/ W 0. 120 (rect.) 30 25 1 45 = 40 35 50 SA 45 R th Maximum Total Power Loss (W) 55 Maximum Total Power Loss (W) Vishay High Power Products 5 0 0 0 5 10 20 0 25 25 50 75 100 125 150 Maximum Allowable Ambient Temperature (C) Total Output Current (A) Fig. 3 - Total Power Loss Characteristics 400 320 Peak Half Sine Wave Forward Current (A) 280 260 240 220 200 180 160 140 120 Maximum non-repetitive surge current versus pulse train duration. Initial TJ = 150 C No voltage reapplied Rated VRRM reapplied 360 Peak Half Sine Wave Forward Current (A) At any rated load condition and with rated VRRM applied following surge. Initial TJ = 150 C at 60 Hz 0.0083 s at 50 Hz 0.0100 s 300 320 280 240 200 160 120 100 26MT.. Series 26MT.. Series 80 80 1 10 100 Number of Equal Amplitude Half Cycle Current Pulses (N) Fig. 4 - Maximum Non-Repetitive Surge Current Document Number: 93565 Revision: 03-Nov-08 0.01 0.1 1 Pulse Drain Duration (s) Fig. 5 - Maximum Non-Repetitive Surge Current For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 26MT../36MT.. Series Three Phase Bridge (Power Modules), 25/35 A Vishay High Power Products Instantaneous Forward Current (A) 150 Maximum Allowable Case Temperature (C) 36MT.. Series 130 110 90 120 (rect.) + ~ 70 - 50 0 5 10 15 20 25 30 35 36MT.. Series 100 Per junction 10 TJ = 25 C TJ = 150 C 1 40 0 1.0 0.5 1.5 2.0 2.5 3.0 3.5 4.0 Total Output Current (A) Instantaneous Forward Voltage (V) Fig. 6 - Current Ratings Characteristics Fig. 7 - Forward Voltage Drop Characteristics 80 Maximum Total Power Loss (W) 80 Maximum Total Power Loss (W) 1000 36MT.. Series TJ = 150 C 70 60 50 120 (rect.) 40 30 20 10 70 R th SA 60 1K 50 = 0. 7 /W K/ W 2K 40 - R /W 3K /W 4 K/ W 5 K/W 7 K/W 30 20 10 K/W 10 0 0 0 5 10 15 20 25 35 30 0 Total Output Current (A) 25 50 75 100 125 150 Maximum Allowable Ambient Temperature (C) Fig. 8 - Total Power Loss Characteristics 500 450 Peak Half Sine Wave Forward Current (A) 400 350 300 250 200 150 400 350 Maximum non-repetitive surge current versus pulse train duration. Initial TJ = 150 C No voltage reapplied Rated VRRM reapplied 300 250 200 150 36MT.. Series 100 1 10 100 Number of Equal Amplitude Half Cycle Current Pulses (N) Fig. 9 - Maximum Non-Repetitive Surge Current www.vishay.com 4 450 Peak Half Sine Wave Forward Current (A) At any rated load condition and with rated VRRM applied following surge. Initial TJ = 150 C at 60 Hz 0.0083 s at 50 Hz 0.0100 s 36MT.. Series 100 0.01 0.1 1 Pulse Drain Duration (s) Fig. 10 - Maximum Non-Repetitive Surge Current For technical questions, contact: ind-modules@vishay.com Document Number: 93565 Revision: 03-Nov-08 26MT../36MT.. Series Three Phase Bridge (Power Modules), 25/35 A Vishay High Power Products ZthJC - Transient Thermal Impedance (K/W) 10 1 Steady state value: RthJC = 1.42 K/W (DC operation) 0.1 26MT.. Series per bridge 0.01 . 0.001 0.001 . 0.01 0.1 1 10 100 Square Wave Pulse Duration (s) Fig. 11 - Thermal Impedance ZthJC Characteristics ZthJC - Transient Thermal Impedance (K/W) 10 1 Steady state value: RthJC = 1.35 K/W (DC operation) 0.1 36MT.. Series per bridge 0.01 . 0.001 0.001 . 0.01 0.1 1 10 100 Square Wave Pulse Duration (s) Fig. 12 - Thermal Impedance ZthJC Characteristics Document Number: 93565 Revision: 03-Nov-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 5 26MT../36MT.. Series Vishay High Power Products Three Phase Bridge (Power Modules), 25/35 A ORDERING INFORMATION TABLE Device code 36 MT 160 1 2 3 1 - Current rating code 2 - Basic part number 3 - Voltage code x 10 = VRRM 26 = 25 A (average) 36 = 35 A (average) CIRCUIT CONFIGURATION + ~ - LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com 6 http://www.vishay.com/doc?95251 For technical questions, contact: ind-modules@vishay.com Document Number: 93565 Revision: 03-Nov-08 Outline Dimensions Vishay Semiconductors D-63 DIMENSIONS in millimeters (inches) 6.3 x 0.8 (0.25 x 0.03) 0.8 (0.31) Suggested plugging force: 400 N maximum; axially applied to fast on terminals 23 (0.90) 21 (0.83) 10 (0.39) 25.3 (0.99) MAX. ~ ~ 5.2 (0.20) 16 (0.63) 28.5 (1.12) ~ Not to scale + Document Number: 95251 Revision: 04-Nov-08 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000