Product Family Data Sheet Rev_ 1.1 2016.09.29 AC Operating Module ACOM DLE 120V Reduced Flicker CRI90 Samsung AC Operating Module is reasonable solution with better uniformity and high reliability Features & Benefits No dark area and smooth light output Easy installation by integrated module Simple design for Down-light Applications Indoor Lighting: Downlight Wall Light 1# 2 Table of Contents 1. Product Code Information ----------------------- 3 2. Characteristics ----------------------- 4 3. Structure ----------------------- 7 4. Certification and Declaration ----------------------- 9 5. Label Structure ----------------------- 10 6. Packing Structure ----------------------- 12 7. Precautions in Handling & Use ----------------------- 13 Applicable wire ----------------------- 14 Appendix 3 1. Product Code Information ACOM Nominal CCT (K) Product Code 2700 SI-N9W1113B1US 3000 SI-N9V1113B1US 4 2. Characteristics ACOM Item Rating Unit Remark Rated Lifetime >50,000 hour L80B10 @ tp, 50 = 75 C Ingress Protection (IP) no rating - Ambient / Operating Temperature (ta) -20 ~ +50 C Storage Temperature -30 ~ +80 C Inrush Current Max. 1.5 A Light Emitting Surface(LES) 22.5 mm Beam Angle 115 10us 5 5 ACOM Item Nom. CCT (K) Rating Remark Min. Typ. Max. 2700 850 940 1100 3000 890 980 1150 2700 - 83 - 3000 - 86 - 2700 790 870 1020 3000 830 920 1070 2700 - 77 - 2700 - 81 - 2700 - 2700 - 3000 - 3000 - Color Rendering Index (Ra) 90 - - - R9 50 - - - Operating Voltage (Vin) 108 120 132 Vac Power Consumption 10.2 11.4 12.6 W Vin = 120 Vac Frequency - 60 - Hz tp = 25/65 C Power Factor 0.9 - - - Percent Flicker - 50 - % THD - 19 20 % Hi-pot Test 1.24 - - kV Luminous Flux (v) Luminous Efficacy Unit lm Vin = 120 Vac tp = 25 C lm/W Luminous Flux (v) Luminous Efficacy lm Vin = 120 Vac tp = 65 C lm/W CCT K Vin = 120 Vac Notes: 1) tp: temperature at which performance is specified, measured at "Tc point" and at the rated typical AC voltage 2) Samsung maintains measurement tolerance of: Luminous flux = 7 %, CRI = 1.0 tp = 25 C Flicker Index 0.18 AC input to Bottom 6 ACOM Item Nominal* Life** Max.*** Unit Temperature 65 (tp) 75 (tp, 50) L80B10 100 (tc) C Notes: * Temperature used to specify performance of the module (tp) ** Rated maximum performance temperature at which lifetime is specified (tp, 50) *** Rated maximum temperature, highest permissible temperature to avoid safety risk (tc) All temperatures are measured at the designated "Tc point" as indicated under Thermal Management drawing, Structure and Assembly section of this Data Sheet Color Coordinate (Vin=120Vac, tp = 25 C) Model Nom. CCT (K) 2700 CIE 1931 Chromaticity coordinates CIE x 0.4498 0.4633 0.4733 0.4593 CIE y 0.4047 0.4079 0.4258 0.4226 Center CIE x 0.4614 CIE y 0.4152 CIE x 0.4262 0.4401 0.4489 0.4343 CIE y 0.3973 0.4021 0.4201 0.4149 Center CIE x 0.4374 CIE y 0.4086 ACOM 3000 Notes: 1) Chromaticity coordinates refer to ANSI C78.377-2008. 2) Samsung maintains 0.005 tolerance on Cx,Cy measurements. 7 3. Structure a) Appearance b) Dimension Number Item Dimension Tolerance Unit Module Width 55 0.15 mm Module Height 12.5 0.5 mm Diameter (LES) 22.5 - mm Screw Hole Size (M3 screw) 3.3 - mm PCB thickness 1.0 0.12 mm c) Structure Item Specification LED LM302A 21ea PCB MCPCB Connector 2-pin IC Samsung Electronics IC 8 d) Thermal Management Performance temperatures are measured on "Tc point" as indicated on the module. tc point (= tp point) tc : case temperature 9 4. Certification and Declaration Item Test & Certification Compliant to Remark CE N/A ENEC N/A VDE N/A UL / cUL E344519 Photobiological Safety N/A RoHS Hazardous Substance & Material REACH Hazardous Substance & Material Declaration 10 5. Label Structure a) Module Label b) Tray Label SI-N9W1113B1US 20150401-E0001 Number Item ACOM Model Number (Product Code) Refer to page 3(14 Digits) Total : 14 digits : Packaging Date (8 digits) + Hypen (1digit) + Production Site (1digit) + Serial No (4 digits) ex) 20140105-E0001 Lot No. QTY Production Date (year & week) Label Issue Date yy/mm/dd Label Size 100 x 50 (mm) Total Product Quantity (5 digits) Production Date (4 digits) : Production Year (2 digits) + Production Week (2 digits) 11 c) Box Label Number Item ACOM Model Number (Product Code) Refer to page 3(14 Digits) - Manufacturer (2 digit) - Packing date (8 digit) . Year(1digit) Month(1digit) Day(2digit) - Serial No.(4digit) . 0001 ~ 9999, A111 ~ A999 Lot No. Manufacturing Country ASSEMBLED IN KOREA QTY Total Product Quantity (5 digits) Production Date (year & week) Label Issue Date yy/mm/dd Label Size 100 x 50 (mm) Production Date (4 digits) : Production Year (2 digits) + Production Week (2 digits) 12 6. Packing Structure Packing Process Step 1 Step 2 Step 3 Dimension (mm) Packing Quantity (modules) Length Width Height Tolerance Tray 80 425 305 66.2 2 Outer Box 320 (4 trays) 430 310 265 5 Pallet 7680 (24 boxes) 1100 1100 130 - 13 7. Precautions in Handling & Use 1) This LED Module should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. When using other solvents it should be confirmed beforehand whether the solvents may react with the Module material. The banned freon solvents should not be used. Do not clean using ultrasonic cleaner. 2) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED Modules. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. Damaged LEDs may show some unusual characteristics such as increase in leak current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. 3) VOCs (Volatile Organic Compounds) can be generated from adhesives, flux, hardener or organic additives used in luminaires (fixtures). Transparent LED silicone encapsulant is permeable to those chemicals and they may lead a discoloration of encapsulant when they exposed to heat or light. This phenomenon can cause a significant loss of light emitted (output) from the luminaires (fixtures). In order to prevent these problems, we recommend users to know the physical properties of the materials used in luminaires, and they must be selected carefully. 4) Risk of sulfurization (or tarnishing) The LED uses a silver-plated lead frame and its surface color may change to black (or dark colored) when it is exposed to sulfur (S), chlorine (Cl) or other halogen compound. Sulfurization of lead frame may cause intensity degradation, change of chromaticity coordinates and, in extreme cases, open circuit. It requires caution. Due to possible sulfurization of lead frame, the LED Modules should not be used and stored together with oxidizing substances made of materials such as rubber, plain paper, lead solder cream, etc. 5) The resin area is very sensitive, please do not handle, press, touch or rub it. 6) Do not drop the Module or give shocks. 7) Do not store the Module in a dusty place or humid location. 8) Do not disassemble the Module. 9) Do not directly look into the lighted LED with naked eyes for a long period of time. 10) Please consider the creepage and clearance distance at the end product. 14 Appendix. Applicable wire a) Applicable wire Wire Range AWG No. Number of Conductors/ Diameter of a conductors Insulation Diameter (mm) 24 1/0.51 1.35 22 1/0.64 1.48 20 1/0.81 1.65 18 1/1.02 1.86 22 17/0.76 After soldering : 0.9mm Max 1.6 20 21/0.95 After soldering : 1.1mm Max 1.78 18 23/1.1 After soldering : 1.25mm Max 2.21 Conductor Type Solid b) Wire stripe length Strand Legal and additional information. About Samsung Electronics Co., Ltd. Samsung Electronics Co., Ltd. is a global leader in technology, opening new possibilities for people everywhere. Through relentless innovation and discovery, we are transforming the worlds of TVs, smartphones, tablets, PCs, cameras, home appliances, printers, LTE systems, medical devices, semiconductors and LED solutions. We employ 286,000 people across 80 countries with annual sales of US$216.7 billion. To discover more, please visit www.samsungled.com. Copyright (c) 2015 Samsung Electronics Co., Ltd. All rights reserved. Samsung is a registered trademark of Samsung Electronics Co., Ltd. Specifications and designs are subject to change without notice. Non-metric weights and measurements are approximate. All data were deemed correct at time of creation. Samsung is not liable for errors or omissions. All brand, product, service names and logos are trademarks and/or registered trademarks of their respective owners and are hereby recognized and acknowledged. Samsung Electronics Co., Ltd. 1, Samsung-ro Giheung-gu Yongin-si, Gyeonggi-do, 17113 KOREA www.samsungled.com