1#
ProductFamilyDataSheetRev_1.12016.09.29
ACOperatingModule
ACOMDLE
120V
ReducedFlicker
CRI90
SamsungACOperatingModuleisreasonablesolution
withbetteruniformityandhighreliability
Featur
es&Benefits
No dark area and smooth light output
Easy installation by integrated module
Simple design for Down-light
Applications
Indoor Lighting:
Downlight
Wall Light
2
TableofContents
1. Product Code Information ----------------------- 3
2. Characteristics ----------------------- 4
3. Structure ----------------------- 7
4. Certification and Declaration ----------------------- 9
5. Label Structure ----------------------- 10
6. Packing Structure ----------------------- 12
7. Precautions in Handling & Use ----------------------- 13
Appendix Applicable wire ----------------------- 14
3
1.ProductCodeInformation
ACOM
NominalCCT(K)ProductCode
2700 SI-N9W1113B1US
3000 SI-N9V1113B1US
4
2.Characteristics
ACOM
ItemRatingUnitRemark
Rated Lifetime >50,000 hour L80B10 @
t
p, 50
= 75 ºC
Ingress Protection (IP) no rating -
Ambient / Operating Temperature (t
a
) -20 ~ +50 ºC
Storage Temperature -30 ~ +80 ºC
Inrush Current Max. 1.5 A 10us
Light Emitting Surface(LES) 22.5 mm
Beam Angle 115 º ±5
5
ACOM
ItemNom.CCT
(K)
Rating
Remark
Min.Typ.Max.Unit
Luminous Flux (Φ
v
)
2700 850 940 1100
lm
V
in
= 120 Vac
t
p
= 25 ºC
3000 890 980 1150
Luminous Efficacy
2700 - 83 -
lm/W
3000 - 86 -
Luminous Flux (Φ
v
)
2700 790 870 1020
lm
V
in
= 120 Vac
t
p
= 65 ºC
3000 830 920 1070
Luminous Efficacy
2700 - 77 -
lm/W
2700 - 81 -
CCT
2700 - 2700 -
K
V
in
= 120 Vac
t
p
= 25 ºC
3000 - 3000 -
Color Rendering Index (Ra) 90 - - -
R9 50 - - -
Operating Voltage (V
in
) 108 120 132 Vac
V
in
= 120 Vac
t
p
= 25/65 ºC
Power Consumption 10.2 11.4 12.6 W
Frequency - 60 - Hz
Power Factor 0.9 - - -
Percent Flicker - 50 - % Flicker Index 0.18
THD - 19 20 %
Hi-pot Test 1.24 - - kV AC input to Bottom
Notes:
1) tp
: temperature at which performance is specified, measured at “Tc point” and at the rated typical AC voltage
2) Samsung maintains measurement tolerance of: Luminous flux = ±7 %, CRI = ±1.0
6
ACOM
ItemNominal*Life**Max.***Unit
Temperature 65 (
t
p
) 75 (
t
p, 50
)
L80B10 100 (
t
c
) ºC
Notes:
* Temperature used to specify performance of the module (
tp
)
** Rated maximum performance temperature at which lifetime is specified (
tp, 50
)
*** Rated maximum temperature, highest permissible temperature to avoid safety risk (
tc
)
All temperatures are measured at the designated “Tc point” as indicated under Thermal Management drawing, Structure and Assembly
section of this Data Sheet
Color Coordinate (V
in
=120Vac, t
p
= 25 ºC)
ModelNom.CCT
(K)CIE1931Chromaticitycoordinates
ACOM
2700
CIE x 0.4498 0.4633 0.4733 0.4593
CIE y 0.4047 0.4079 0.4258 0.4226
Center CIE x 0.4614 CIE y 0.4152
3000
CIE x 0.4262 0.4401 0.4489 0.4343
CIE y 0.3973 0.4021 0.4201 0.4149
Center CIE x 0.4374 CIE y 0.4086
Notes:
1) Chromaticity coordinates refer to ANSI C78.377-2008.
2) Samsung maintains ±0.005 tolerance on Cx,Cy measurements.
7
3.Structure
a) Appearance
b) Dimension
NumberItemDimensionToleranceUnit
① Module Width 55 ±0.15 mm
② Module Height 12.5 ±0.5 mm
③ Diameter (LES) 22.5 - mm
④ Screw Hole Size (M3 screw) 3.3 - mm
⑤ PCB thickness 1.0 ±0.12 mm
c) Structure
ItemSpecification
LED LM302A 21ea
PCB MCPCB
Connector 2-pin
IC Samsung Electronics IC
8
d) Thermal Management
Performance temperatures are measured on “Tc point” as indicated on the module.
tc point (= tp point)
※ tc : case temperature
9
4.CertificationandDeclaration
ItemComplianttoRemark
Test & Certification
CE N/A
ENEC N/A
VDE N/A
UL / cUL E344519
Photobiological Safety N/A
Declaration
RoHS Hazardous Substance & Material
REACH Hazardous Substance & Material
10
5.LabelStructure
a) Module Label
b) Tray Label
NumberItemACOM
① Model Number (Product Code) Refer to page 3(14 Digits)
② Lot No.
Total : 14 digits
: Packaging Date (8 digits)
+ Hypen (1digit)
+ Production Site (1digit)
+ Serial No (4 digits)
ex) 20140105-E0001
③ QTY Total Product Quantity (5 digits)
④ Production Date (year & week)
Production Date (4 digits)
: Production Year (2 digits) +
Production Week (2 digits)
⑤ Label Issue Date yy/mm/dd
‐ Label Size 100 x 50 (mm)
SI-N9W1113B1US
20150401-E0001
② ③ ④
11
c) Box Label
NumberItemACOM
① Model Number (Product Code) Refer to page 3(14 Digits)
② Lot No.
- Manufacturer (2 digit)
- Packing date (8 digit)
. Year(1digit) Month(1digit) Day(2digit)
- Serial No.(4digit)
. 0001 ~ 9999, A111 ~ A999
③ Manufacturing Country ASSEMBLED IN KOREA
④ QTY Total Product Quantity (5 digits)
⑤ Production Date (year & week)
Production Date (4 digits)
: Production Year (2 digits) +
Production Week (2 digits)
⑥ Label Issue Date yy/mm/dd
‐ Label Size 100 x 50 (mm)
12
6.PackingStructure
Packing Process
Step 1
Step 2
Step 3
PackingQuantity(modules)
Dimension(mm)
LengthWidthHeightTolerance
Tray 80 425 305 66.2 ±2
Outer Box 320 (4 trays) 430 310 265 ±5
Pallet 7680 (24 boxes) 1100 1100 130 -
13
7.PrecautionsinHandling&Use
1) This LED Module should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is
recommended to use. When using other solvents it should be confirmed beforehand whether the solvents may react with the Module
material. The banned freon solvents should not be used. Do not clean using ultrasonic cleaner.
2) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when
handling the LED Modules. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even
destruction to LED devices. Damaged LEDs may show some unusual characteristics such as increase in leak current, lowered turn-on
voltage, or abnormal lighting of LEDs at low current.
3) VOCs (Volatile Organic Compounds) can be generated from adhesives, flux, hardener or organic additives used in luminaires (fixtures).
Transparent LED silicone encapsulant is permeable to those chemicals and they may lead a discoloration of encapsulant when they
exposed to heat or light. This phenomenon can cause a significant loss of light emitted (output) from the luminaires (fixtures). In
order to prevent these problems, we recommend users to know the physical properties of the materials used in luminaires, and they
must be selected carefully.
4) Risk of sulfurization (or tarnishing)
The LED uses a silver-plated lead frame and its surface color may change to black (or dark colored) when it is exposed to sulfur (S),
chlorine (Cl) or other halogen compound. Sulfurization of lead frame may cause intensity degradation, change of chromaticity
coordinates and, in extreme cases, open circuit. It requires caution. Due to possible sulfurization of lead frame, the LED Modules
should not be used and stored together with oxidizing substances made of materials such as rubber, plain paper, lead solder cream, etc.
5) The resin area is very sensitive, please do not handle, press, touch or rub it.
6) Do not drop the Module or give shocks.
7) Do not store the Module in a dusty place or humid location.
8) Do not disassemble the Module.
9) Do not directly look into the lighted LED with naked eyes for a long period of time.
10) Please consider the creepage and clearance distance at the end product.
14
Appendix.Applicablewire
a) Applicable wire
WireRangeAWGNo.NumberofConductors/
Diameterofaconductors
Insulation
Diameter(mm)ConductorType
24 1/0.51 1.35
Solid
22 1/0.64 1.48
20 1/0.81 1.65
18 1/1.02 1.86
22 17/0.76
After soldering : Φ0.9mm Max 1.6
Strand
20 21/0.95
After soldering : Φ1.1mm Max 1.78
18 23/1.1
After soldering : Φ1.25mm Max 2.21
b) Wire stripe length
Legalandadditionalinformation.
About Samsung Electronics Co., Ltd.
Samsung Electronics Co., Ltd. is a global leader in technology,
opening new possibilities for people everywhere. Through relentless
innovation and discovery, we are transforming the worlds of
TVs, smartphones, tablets, PCs, cameras, home appliances, printers,
LTE systems, medical devices, semiconductors and LED solutions.
We employ 286,000 people across 80 countries with annual sales of
US$216.7 billion. To discover more, please visit www.samsungled.com.
Copyright © 2015 Samsung Electronics Co., Ltd. All rights reserved.
Samsung is a registered trademark of Samsung Electronics Co., Ltd.
Specifications and designs are subject to change without notice. Non-metric
weights and measurements are approximate. All data were deemed correct
at time of creation. Samsung is not liable for errors or omissions. All brand, product,
service names and logos are trademarks and/or registered trademarks of their
respective owners and are hereby recognized and acknowledged.
Samsung Electronics Co., Ltd.
1, Samsung-ro
Giheung-gu
Yongin-si, Gyeonggi-do, 17113
KOREA
www.samsungled.com