The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. Push-on Bayonet Lock Miniature Waterproof Connector HR34B Series Push-on Bayonet Lock Mating : Just inserting plug unit will complete mating Un-mating : Rotating sleeve to unlock mating fig.1 Features Cable exit directions 1. Water and dust protection * IP67 or more (IP68) water and dust protection rating when fully mated. * Resistant to industrial grade oils. * 4-position receptacles are sealed against water penetration when mounted on the panel - no protective cap is required. 2. Easy and precise mating * Mating: Just inserting plug unit completes mating Unmating: Rotating sleeve counterclockwise unlocks connectors (fig.1) * Marking helps align plug with receptacle when mating. * 3 guide keys make blind mating possible. (Receptacle structure prevents plug from damaging receptacle terminals) fig.2 3. Multi-directional cable exit Right angle plugs allow the cable to exit in 8 directions, in 45 increments.(fig.2) 4. Safty standards The 4-position connectors meet requirements of T UV standard. 5. Wide variation Item Number of positions Connector type Terminations(plug) Terminations(receptacle) Conduit material Applicable cable size(Reference) 4,10 straight plug,right angle plug,receptacle solder,crimp wire solder plastic,metal (O5.3~6.5), (O6.5~7.3), (O8.0~9.0) 2011.53 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HR34B SeriesPush-on Bayonet Lock Miniature Waterproof Connector Specifications Current rating 10 pos.: 3 A 4 pos. : 5 A Operating temperature range -25C to 125C Voltage rating 10 pos.: 200 V AC, 250 V DC 4 pos. : 200 V AC, 200 V DC (contamination level 3) 400 V AC, 400 V DC (contamination level 2) Storage temperature range -25C to 85C Ratings Item 1.Contact resistance 2.Insulation resistance 20 mo max. 1,000 Mo min. Specification Conditions 1 A DC 500 V DC 10 pos. : 900 V AC / 1 minute 4 pos. : 2,000 V AC / 1 minute 3.Withstanding voltage No flashover or insulation breakdown 4.Vibration No electrical discontinuity of 10 s or longer Frequency: 10 to 500 Hz/cycle, total amplitude of 0.75 mm, 98m/s2 each, 3 hours in 3 axis. 5.Shock No electrical discontinuity of 10 s or longer Acceleration of 490 m/s2, 11 ms duration, 3 axis, each for 3 hours 6.Durability (Mating / un-mating) Contact resistance: 30 mo max. 500 cycles 7.Temperature cycle Insulation resistance: 500 Mo min. Temperature :-55C / +15 to +35C / +85C / +15 to +35C Time :-30 min. / 10 to 15 min. / 30 min. / 10 to 15 min. 5 cycles 8.Humidity Insulation resistance: 50 Mo min. (at high humidity) Insulation resistance: 500 Mo min. (when dry) 336 hours at 71C, and humidity of 95% 9.Water protection No water penetration when submerged for 0.5 hours at the depth of 1 meters. Materials Plugs Part Material Zinc alloy, aluminum alloy, and polyamide resin (black) Outer shell Insulator Female contacts 10 pos. 4 pos. O-ring Gasket PPS Phosphor bronze Copper alloy Fluororubber, Nitrile hydride rubber Finish Black chrome plating, black chromate finish (Cr +3) Remarks --------------- Color: Black Gold plated Silver plated UL94V-0 ----------------------------- --------------- --------------- Receptacles Part Outer shell Insulator Male contacts Ground contact O-ring 2 10 pos. 4 pos. 4 pos. Material Zinc alloy PPS Copper alloy Brass Brass Fluororubber Finish Black chromate finish (Cr +3) Color: Black Gold plated Silver plated Silver plated --------------- Remarks --------------UL94V-0 --------------------------------------------------------- The product information in this catalog is for reference only. Please request the Engineering for the most current Lock and accurate design information. HR34B Drawing SeriesPush-on Bayonet Miniature Waterproof Connector Ordering information Please determine the specific product. If listed needed, please select and order the product No. Plugs HR34B - 12 WP A - 10 S - X ( ** ) 1 2 3 4 5 6 7 8 5 Number of contact : Number of contacts. 1 Series name 2 Shell size 3 Shell style : HR34B Series : Diameter(mm) of the mating interface of the plug WP : Straight plug WLP : Right-angle plug 4 Conduit material and Applicable cable size A:Conduit material metal, Applicable cable (Reference):(O5.3~6.5) B:Conduit material metal, Applicable cable (Reference):(O6.5~7.3) D:Conduit material plastic, Applicable cable (Reference):(O5.7~6.5) E:Conduit material plastic, Applicable cable (Reference):(O6.5~7.3) K:Conduit material metal, Applicable cable (Reference):(O8.0~9.0) (Excluding ground contacts) 6 Contact type S : Female wire solder SC : Female crimp 7 Keying Blank : Standard X : X key position 8 Other specifications : 2 numerical digits wil be added when there is a specifications change other than shown in positions q to u Receptacles HR34B - 12 WR A - 10 P - X ( ** ) 1 1 2 3 4 2 3 4 5 Series name : HR34B Series Shell size : Diameter(mm) of the mating interface of the plug Shell style WR : Receptacl Shell type A : Square flange for 10 positions B : Square flange for 4 positions 6 7 8 5 Number of contact : Number of contacts. (Excluding ground contacts) 6 Contact type P : Male,wire solder 7 Keying Blank : Standard X : X key position 8 Other specifications : 2 numerical digits wil be added when there is a specification change other than shown in positions q to u Crimp contacts HR34B - SC1 - 2 1 1 1 2 1 Series name : HR34B Series 2 Contact style : SC1:Female contact 3 Contact type 3 4 5 4 Conductor size : AWG#20 - #25 5 Plating 1:Gold plated 1 : 100pcs.per bag 2 : 10,000pcs per reel 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HR34B SeriesPush-on Bayonet Lock Miniature Waterproof Connector Straight plugs Standard type (Conduit material :Plastic) A O19 49 Wire solder All dimensions: mm HRS No. A Applicable cable diameter range(Reference) HR34B-12WPD-10S Part Number 134-0026-0-00 O7.4 (O5.7~6.5) HR34B-12WPE-10S 134-0027-2-00 O8.5 (O6.5~7.3) HR34B-12WPD-4S 134-0020-3-00 O7.4 (O5.7~6.5) HR34B-12WPD-4S-X 134-0023-1-00 HR34B-12WPE-4S 134-0025-7-00 O8.5 (O6.5~7.3) HR34B-12WPE-4S-X 134-0031-0-00 HRS No. A Applicable cable diameter range(Reference) HR34B-12WPD-10SC 134-0037-6-00 O7.4 (O5.7~6.5) HR34B-12WPE-10SC 134-0038-9-00 O8.5 (O6.5~7.3) HRS No. A Applicable cable diameter range(Reference) HR34B-12WPA-10S(71) 134-0004-7-71 O7.4 (O5.7~6.5) HR34B-12WPB-10S(71) 134-0007-5-71 O8.5 (O6.5~7.3) HR34B-12WPK-10S 134-0052-0-00 O9.5 (O8.0~9.0) HRS No. A Applicable cable diameter range(Reference) HR34B-12WPA-10SC 134-0017-9-00 O7.4 (O5.7~6.5) HR34B-12WPB-10SC 134-0028-5-00 O8.5 (O6.5~7.3) HR34B-12WPK-10SC 134-0053-2-00 O9.5 (O8.0~9.0) Solder cup inner diameter O1 O1.7 Crimp (separate contacts required) Part Number Robust type(Conduit material :Metal) Wire solder All dimensions: mm Part Number Solder cup inner diameter O1 Crimp (separate contacts required) Part Number Not all cables of applicable dia. range can be easily assembled. Please kindly check with factory before use. BIllustrations of mated connectors. Straight plug Mating combinations B 4 B 10 pos.plug + receptacle wire solder 50.1 4 pos.plug + receptacle wire solder 49.6 The product information in this catalog is for reference only. Please request the Engineering for the most current Lock and accurate design information. HR34B Drawing SeriesPush-on Bayonet Miniature Waterproof Connector Right angle plugs Standard type (Conduit material : Plastic) B 33.5 A O19 Wire solder All dimensions: mm HRS No. A HR34B-12WLPD-10S Part Number 134-0039-1-00 O7.4 (O5.7~6.5) HR34B-12WLPE-10S 134-0040-0-00 O8.5 (O6.5~7.3) HR34B-12WLPD-4S 134-0030-7-00 HR34B-12WLPD-4S-X 134-0034-8-00 HR34B-12WLPE-4S 134-0035-0-00 HR34B-12WLPE-4S-X 134-0036-3-00 O7.4 B 30.85 Applicable cable diameter range(Reference) Solder cup inner diameter O1 (O5.7~6.5) O1.7 O8.5 (O6.5~7.3) Crimp (separate contacts required) Part Number HRS No. A HR34B-12WLPD-10SC 134-0041-3-00 O7.4 HR34B-12WLPE-10SC 134-0042-6-00 O8.5 B 30.85 Applicable cable diameter range(Reference) (O5.7~6.5) (O6.5~7.3) Robust type (Conduit material :Metal) Wire solder Part Number HRS No. A B HR34B-12WLPA-10S(71) 134-0005-0-71 O7.4 HR34B-12WLPB-10S(71) 134-0008-8-71 O8.5 HR34B-12WLPK-10S 134-0054-5-00 O9.5 31.5 (O8.0~9.0) HRS No. A B Applicable cable diameter range(Reference) HR34B-12WLPA-10SC 134-0018-1-00 O7.4 HR34B-12WLPB-10SC 134-0029-8-00 O8.5 HR34B-12WLPK-10SC 134-0055-8-00 O9.5 30.5 Applicable cable diameter range(Reference) Solder cup Allinner dimensions: diametermm (O5.7~6.5) O1 (O6.5~7.3) Crimp (separate contacts required) Part Number 30.5 31.5 (O5.7~6.5) (O6.5~7.3) (O8.0~9.0) Not all cables of applicable dia. range can be easily assembled. Please kindly check with factory before use. BIllustrations of mated connectors. Right-angle plug Mating Combinations A 33.5 10 pos. plug shell A,B type. Plug + receptacle wire solder 31.0 10 pos. plug shell D,E type. Plug + receptacle wire solder 31.3 10 pos. plug shell K type. Plug + receptacle wire solder 32.0 4 pos.plug + receptacle wire solder 31.3 A 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HR34B SeriesPush-on Bayonet Lock Miniature Waterproof Connector Receptacles Wire solder 48) 2. (R 4-O 1 3 8 10 B A 4 3.2 7 A B All dimensions: mm HRS No. A B Solder cup inner diameter HR34B-12WRA-10P Part Number 134-0016-6-00 17.26 23.4 O1 HR34B-12WRB-4P 134-0021-6-00 18.26 25.4 O1.4 HR34B-12WRB-4P-X 134-0024-4-00 O ring for water proof is not attached. Please find appropriate one from the market. BRecommended panel cutouts Receptacle - wire solder All dimensions: mm 4-B HR34B-12WRA-10P HR34B-12WRB-4P HR34B-12WRB-4P-X 17.260.05 18.260.05 A M30.5 A B A C 1 0/-0.1 1.1 0/-0.1 D 12.5 +0.1/0 16.3 +0.1/0 E 17 +0.1/0 20.8 +0.1/0 C Recommended O ring dia. Part Number HR34B-12WRA-10P OD HR34B-12WRB-4P OE HR34B-12WRB-4P-X Cross-section diameter 1.5 11.5 1.5 15.5 BReceptacle Contact Arrangement 4 pos.wire solder 10 pos.wire solder note.1 View direction:Mating surface of pin insert. note.2 mark is ground terminal. 1 2 1 4 3 8 Crimp contacts 2 5 3 6 9 7 10 15 1.2 Female Part Number CL No. Applicable conductor AWG #20 - 25 (Stranded wire) HR34B-SC1-111 134-0051-7-00 100 pcs. per bag HR34B-SC1-211 134-0050-4-00 10,000 pcs. per reel Note: Use wire with a jacket diameter of 1.7mm max. 6 Packaging The product information in this catalog is for reference only. Please request the Engineering for the most current Lock and accurate design information. HR34B Drawing SeriesPush-on Bayonet Miniature Waterproof Connector BConnector Mating Combinations 10 pos. Plugs 10 pos. Receptacles Straight, Wire Solder or Crimp (Standard key position) HR34B-12WPA-10S,10SC HR34B-12WPB-10S,10SC HR34B-12WPD-10S,10SC HR34B-12WPE-10S,10SC HR34B-12WPK-10S,10SC Wire Solder HR34B-12WRA-10P Right angle, Wire Solder or Crimp (Standard key position) HR34B-12WLPA-10S,10SC HR34B-12WLPB-10S,10SC HR34B-12WLPD-10S,10SC HR34B-12WLPE-10S,10SC HR34B-12WLPK-10S,10SC 4 pos. Plugs 4 pos. Receptacles Straight, Wire Solder (Standard key position) HR34B-12WPD-4S HR34B-12WPE-4S Standard polarizing key Wire solder (Standard key position) HR34B-12WRB-4P Right angle, Wire Solder (Standard key position) HR34B-12WLPD-4S HR34B-12WLPE-4S Standard key position Straight, Wire Solder (X key position) HR34B-12WPD-4S-X HR34B-12WPE-4S-X Wire solder (X key position) HR34B-12WRB-4P-X Right angle, Wire Solder (X key position) HR34B-12WLPD-4S-X HR34B-12WLPE-4S-X X key position X key position 7 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. HR34B SeriesPush-on Bayonet Lock Miniature Waterproof Connector Applicable tools Description Part Number CL No. Applicable contact Applicable cable Manual contact crimping tool Press Applicator HT304/HR34B-1 CM-105 AP105-HR34B-1 150-0107-9 901-0005-4 901-2051-2 HR34B-SC1-111 AWG20,AWG23,AWG25 HR34B-SC1-211 AWG20 to AWG25 Contact extraction tool RP6-SC-TP 150-0039-0 HR34B-SC1-111 HR34B-SC1-211 --------------- Manual contact crimping tool Press CM-105 (Applicator ordered separate) Contact extraction tool BHandling 1. Mating 2. Un-mating Plug Receptacle B A Rotate counter-clockwise Mating position alignment marks Holding the plug by the outer shell (A) align the arrow on the plug with the alignment mark on the receptacle and push straight in. BPrecautions Rotate the locking collar counter-clockwise to a full stop and unmate the plug from the receptacle. Center line of the connector Alignment mark When completely mated and locked the alignment arrow on the plug must line-up with the center line of the connector (alignment mark on the receptacle). If the alignment arrow and the center line of the connectors are not aligned (1 mm max.) re-insert the plug until they are aligned. 1 mm max. 1. When disconnecting or inserting the connector, be sure to do so after turning off the power. 2. To insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diagram below (i.e., the mating mark of the receptacle). 3. Note that the display method of the mating mark will differ depending on the receptacle. 4. To maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diameter. 5. Please consult Hirose Electric Sales for harness assembly procedure. (R) 8 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230 http://www.hirose.com http://www.hirose-connectors.com The contents of this catalog are current as of date of 05/2011. Contents are subject to change without notice for the purpose of improvements. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Hirose Electric: HT304/HR34B-1