1
2011.53
Push-on Bayonet Lock Miniature Waterproof Connector
HR34B Series
■Features
1. Water and dust protection
• IP67 or more (IP68) water and dust protection rating when
fully mated.
• Resistant to industrial grade oils.
• 4-position receptacles are sealed against water penetration
when mounted on the panel - no protective cap is required.
2. Easy and precise mating
• Mating: Just inserting plug unit completes mating
Unmating: Rotating sleeve counterclockwise unlocks
connectors (fig.1)
• Marking helps align plug with receptacle when mating.
• 3 guide keys make blind mating possible.
(Receptacle structure prevents plug from damaging
receptacle terminals)
3. Multi-directional cable exit
Right angle plugs allow the cable to exit in 8 directions, in
45˚ increments.(fig.2)
4. Safty standards
The 4-position connectors meet requirements of T ¨
UV
standard.
5. Wide variation
Item
Number of positions
Connector type
Terminations(plug)
Terminations(receptacle)
Conduit material
Applicable cable size(Reference)
4,10
straight plug,right angle plug,receptacle
solder,crimp
wire solder
plastic,metal
(Ø5.3~6.5), (Ø6.5~7.3), (Ø8.0~9.0)
Push-on Bayonet Lock
fig.1
Mating : Just inserting plug unit will complete mating
Un-mating : Rotating sleeve to unlock mating
Cable exit directions
fig.2
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
2
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector
■Specifications
1 A DC
500 V DC
10 pos. : 900 V AC / 1 minute
4 pos. : 2,000 V AC / 1 minute
20 mø max.
1,000 Mø min.
No flashover or insulation breakdown
1.
Contact resistance
2.
Insulation resistance
3.Withstanding voltage
SpecificationItem Conditions
Insulation resistance: 50 Mø min. (at high humidity)
Insulation resistance: 500 Mø min. (when dry)
No water penetration when submerged for 0.5 hours at the depth of 1 meters.
500 cycles
No electrical discontinuity of 10 µs or longer
Contact resistance: 30 mø max.
Insulation resistance: 500 Mø min.
Frequency: 10 to 500 Hz/cycle, total amplitude of 0.75 mm,
98m/s2each, 3 hours in 3 axis.
Temperature :-55°C /+15° to +35°C /+85°C /+15° to +35°C
Time :-30 min. /10 to 15 min. /30 min. /10 to 15 min.
5 cycles
336 hours at 71°C, and humidity of 95%
Acceleration of 490 m/s2, 11 ms duration,
3 axis, each for 3 hours
No electrical discontinuity of 10 µs or longer4.Vibration
5.Shock
6.Durability
(Mating / un-mating)
7.Temperature cycle
8.Humidity
9.
Water protection
Current rating
Voltage rating
Ratings 10 pos.: 200 V AC, 250 V DC
4 pos. : 200 V AC, 200 V DC (contamination level 3)
400 V AC, 400 V DC (contamination level 2)
10 pos.: 3 A
4 pos. :5 A
Operating temperature range
Storage temperature range
-25°C to 125°C
-25°C to 85°C
■Materials
Remarks
---------------
---------------
---------------
---------------
---------------
UL94V-0
Part Material Finish
Outer shell
Insulator
O-ring
Male contacts
Ground contact
10 pos.
4 pos.
4 pos.
Zinc alloy
PPS
Copper alloy
Brass
Brass
Fluororubber
Gold plated
Silver plated
Silver plated
Black chromate finish (Cr +3)
Color: Black
---------------
●Receptacles
Remarks
---------------
---------------
---------------
---------------
UL94V-0
Part Material Finish
Outer shell
O-ring
Gasket
Insulator
Female contacts 10 pos.
4 pos.
Zinc alloy, aluminum alloy, and
polyamide resin (black)
Fluororubber,
Nitrile hydride rubber
PPS
Black chrome plating, black
chromate finish (Cr +3)
Color: Black
---------------
Phosphor bronze
Copper alloy
Gold plated
Silver plated
●Plugs
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
3
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector
Number of contact : Number of contacts.
(Excluding ground contacts)
Contact type
S : Female wire solder
SC : Female crimp
Keying
Blank : Standard
X : X key position
Other specifications : 2 numerical digits wil be added when there
is a specifications change other than
shown in positions qto u
■Ordering information
Please determine the specific product. If listed needed, please select and order the product No.
HR34B - 12 WP A - 10 S - X (****)
1 52 3 4 6 7 8
●Plugs
Series name : HR34B Series
Shell size : Diameter(mm) of the mating interface of the plug
Shell style WP : Straight plug
WLP : Right-angle plug
Conduit material and Applicable cable size
A:Conduit material metal, Applicable cable (Reference):(Ø5.3~6.5)
B:Conduit material metal, Applicable cable (Reference):(Ø6.5~7.3)
D:Conduit material plastic, Applicable cable (Reference):(Ø5.7~6.5)
E:Conduit material plastic, Applicable cable (Reference):(Ø6.5~7.3)
K:Conduit material metal, Applicable cable (Reference):(Ø8.0~9.0)
1 5
6
7
8
2
3
4
Number of contact : Number of contacts.
(Excluding ground contacts)
Contact type
P : Male,wire solder
Keying
Blank : Standard
X : X key position
Other specifications : 2 numerical digits wil be added when there
is a specification change other than shown
in positions qto u
HR34B - 12 WR A - 10 P - X (****)
1 52 3 4 6 7 8
●Receptacles
Series name : HR34B Series
Shell size : Diameter(mm) of the mating interface of the plug
Shell style WR : Receptacl
Shell type
A : Square flange for 10 positions
B : Square flange for 4 positions
1 5
6
7
8
2
3
4
Conductor size : AWG#20 - #25
Plating
1:Gold plated
HR34B - SC1 - 2 1 1
1 2 43 5
●Crimp contacts
Series name : HR34B Series
Contact style :
SC1:Female contact
Contact type
1 : 100pcs.per bag
2 : 10,000pcs per reel
1 4
5
2
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
BIllustrations of mated connectors.
4
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector
49
Ø19
A
■Straight plugs
Part Number
HR34B-12WPD-10S
HR34B-12WPE-10S
HR34B-12WPD-4S
HR34B-12WPD-4S-X
HR34B-12WPE-4S
HR34B-12WPE-4S-X
HRS No. A
134-0026-0-00
134-0027-2-00
134-0020-3-00
134-0023-1-00
134-0025-7-00
134-0031-0-00
Ø7.4
Ø8.5
Ø7.4
Ø8.5
Applicable cable diameter range(Reference)
Solder cup inner diameter
All dimensions: mm
Ø1
Ø1.7
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø5.7~6.5)
(Ø6.5~7.3)
Part Number
HR34B-12WPA-10S(71)
HR34B-12WPB-10S(71)
HR34B-12WPK-10S
HRS No. A
134-0004-7-71
134-0007-5-71
134-0052-0-00
Ø7.4
Ø8.5
Ø9.5
Applicable cable diameter range(Reference)
Solder cup inner diameter
All dimensions: mm
Ø1
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø8.0~9.0)
Part Number
HR34B-12WPD-10SC
HR34B-12WPE-10SC
HRS No. A
134-0037-6-00
134-0038-9-00
Ø7.4
Ø8.5
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
(Ø6.5~7.3)
Part Number
HR34B-12WPA-10SC
HR34B-12WPB-10SC
HR34B-12WPK-10SC
Not all cables of applicable dia. range can be easily assembled.
Please kindly check with factory before use.
HRS No. A
134-0017-9-00
134-0028-5-00
134-0053-2-00
Ø7.4
Ø8.5
Ø9.5
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø8.0~9.0)
●Standard type (Conduit material :Plastic)
◆Wire solder
◆Wire solder
◆Crimp (separate contacts required)
●Crimp (separate contacts required)
●Robust type(Conduit material :Metal)
B
Straight plug Mating combinations
10 pos.plug + receptacle wire solder
4 pos.plug + receptacle wire solder
B
50.1
49.6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
5
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector
■Right angle plugs
●Standard type (Conduit material : Plastic)
33.5
Ø19
BA
Part Number
HR34B-12WLPD-10S
HR34B-12WLPE-10S
HR34B-12WLPD-4S
HR34B-12WLPD-4S-X
HR34B-12WLPE-4S
HR34B-12WLPE-4S-X
HRS No. A B
134-0039-1-00
134-0040-0-00
134-0030-7-00
134-0034-8-00
134-0035-0-00
134-0036-3-00
Applicable cable diameter range(Reference)
Solder cup inner diameter
All dimensions: mm
Ø1
Ø1.7
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø5.7~6.5)
(Ø6.5~7.3)
Part Number
HR34B-12WLPA-10S(71)
HR34B-12WLPB-10S(71)
HR34B-12WLPK-10S
HRS No. A B
134-0005-0-71
134-0008-8-71
134-0054-5-00
Ø7.4
Ø8.5
Ø9.5
30.5
31.5
Applicable cable diameter range(Reference)
Solder cup inner diameterAll dimensions: mm
Ø1
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø8.0~9.0)
Part Number
HR34B-12WLPD-10SC
HR34B-12WLPE-10SC
HRS No. A B
134-0041-3-00
134-0042-6-00
Ø7.4
Ø8.5 30.85
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
(Ø6.5~7.3)
Part Number
HR34B-12WLPA-10SC
HR34B-12WLPB-10SC
HR34B-12WLPK-10SC
Not all cables of applicable dia. range can be easily assembled.
Please kindly check with factory before use.
HRS No. A B
134-0018-1-00
134-0029-8-00
134-0055-8-00
Ø7.4
Ø8.5
Ø9.5
30.5
31.5
Applicable cable diameter range(Reference)
(Ø5.7~6.5)
(Ø6.5~7.3)
(Ø8.0~9.0)
◆Wire solder
◆Wire solder
◆Crimp (separate contacts required)
●Crimp (separate contacts required)
●Robust type (Conduit material :Metal)
Ø7.4
Ø8.5
Ø7.4
Ø8.5
30.85
BIllustrations of mated connectors.
A
（33.5）
10 pos. plug shell A,B type.
10 pos. plug shell D,E type.
10 pos. plug shell K type.
4 pos.plug + receptacle wire solder
Plug + receptacle wire solder
Plug + receptacle wire solder
Plug + receptacle wire solder
A
31.0
31.3
32.0
31.3
Right-angle plug Mating Combinations
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
6
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector
■Receptacles
◆Wire solder
13
47
810
A
A
B
B
4-Ø3.2
4-(R2.8)
Part Number
HR34B-12WRA-10P
HR34B-12WRB-4P
HR34B-12WRB-4P-X
O ring for water proof is not attached. Please find appropriate one from the market.
HRS No. A B
134-0016-6-00
134-0021-6-00
134-0024-4-00
Solder cup inner diameter
All dimensions: mm
Ø1
Ø1.4
17.26
18.26
23.4
25.4
■Crimp contacts
◆Female
15
1.2
Part Number Packaging
HR34B-SC1-111
HR34B-SC1-211
100 pcs. per bag
10,000 pcs. per reel
Note: Use wire with a jacket diameter of 1.7mm max.
CL No.
134-0051-7-00
134-0050-4-00
Applicable conductor
AWG #20 - 25
(Stranded wire)
BRecommended panel cutouts
●Receptacle - wire solder
ØE
ØD
CA
A
4-B
A
B
C
D
E
Part Number
HR34B-12WRA-10P
HR34B-12WRB-4P
HR34B-12WRB-4P-X
Recommended O ring dia.
Cross-section
1.5
1.5
diameter
11.5
15.5
HR34B-12WRA-10P HR34B-12WRB-4P
HR34B-12WRB-4P-X
17.26±0.05
1 0/-0.1
12.5 +0.1/0
17 +0.1/0
18.26±0.05
1.1 0/-0.1
16.3 +0.1/0
20.8 +0.1/0
M3∞0.5
All dimensions: mm
BReceptacle Contact Arrangement
note.1 View direction:Mating surface of pin insert.
note.2 mark is ground terminal.
108
74
312
65
9
1
23
4 pos.wire solder 10 pos.wire solder
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
7
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector
BConnector Mating Combinations
Straight, Wire Solder (Standard key position)
HR34B-12WPD-4S
HR34B-12WPE-4S
Wire solder (Standard key position)
HR34B-12WRB-4P
Wire solder (X key position)
HR34B-12WRB-4P-X
Right angle, Wire Solder (Standard key position)
HR34B-12WLPD-4S
HR34B-12WLPE-4S
Straight, Wire Solder (X key position)
HR34B-12WPD-4S-X
HR34B-12WPE-4S-X
Right angle, Wire Solder (X key position)
HR34B-12WLPD-4S-X
HR34B-12WLPE-4S-X
4 pos. Plugs 4 pos. Receptacles
Standard key position
X key position
X key position
Standard
polarizing key
Straight, Wire Solder or Crimp (Standard key position)
HR34B-12WPA-10S,10SC HR34B-12WPB-10S,10SC
HR34B-12WPD-10S,10SC HR34B-12WPE-10S,10SC
HR34B-12WPK-10S,10SC
Right angle, Wire Solder or Crimp (Standard key position)
HR34B-12WLPA-10S,10SC HR34B-12WLPB-10S,10SC
HR34B-12WLPD-10S,10SC HR34B-12WLPE-10S,10SC
HR34B-12WLPK-10S,10SC
Wire Solder
HR34B-12WRA-10P
10 pos. Plugs 10 pos. Receptacles
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
8
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector
■Applicable tools
Description Part Number CL No. Applicable contact Applicable cable
Manual contact crimping tool
Press
Applicator
Contact extraction tool
HT304/HR34B-1
CM-105
AP105-HR34B-1
RP6-SC-TP
150-0107-9
901-0005-4
901-2051-2
150-0039-0
HR34B-SC1-111
HR34B-SC1-211
HR34B-SC1-111
HR34B-SC1-211
AWG20,AWG23,AWG25
AWG20 to AWG25
---------------
●
Manual contact crimping tool
●Press CM-105 (Applicator
ordered separate) ●Contact extraction tool
BHandling
BPrecautions
1. Mating 2. Un-mating
Holding the plug by the outer shell (A) align the arrow on the plug
with the alignment mark on the receptacle and push straight in.
Rotate the locking collar counter-clockwise to a full stop and un-
mate the plug from the receptacle.
Plug
Mating position alignment marks
Receptacle
A
B
Rotate counter-clockwise
1. When disconnecting or inserting the connector, be sure to do so after turning off the power.
2. To insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diagram below (i.e., the
mating mark of the receptacle).
3. Note that the display method of the mating mark will differ depending on the receptacle.
4. To maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diameter.
5. Please consult Hirose Electric Sales for harness assembly procedure.
Center line of the connector
1 mm max.
Alignment mark
When completely mated and locked the alignment
arrow on the plug must line-up with the center line of
the connector (alignment mark on the receptacle).
If the alignment arrow and the center line of the
connectors are not aligned (1 mm max.) re-insert
the plug until they are aligned.
The contents of this catalog are current as of date of 05/2011. Contents are subject to change without notice for the purpose of improvements.
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230
http://www.hirose.com
http://www.hirose-connectors.com
®
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
