Dimensions are in inches [mm]
HyperRel Series
2 / 37
www.hypertronics.com
HyperRel Series
Ruggedized Connectors Intermateable
with MIL-DTL-38999 Series III
• Available with metal (HRM) and composite (HRC) shells
• Ruggedized socket interconnects
• High shock and vibration resistance
• Metal and composite shell styles
• Hypertac®style 39029 contacts
• Intermateable with industry standard Mil 38999
Series III connectors
• Cable-to-cable and panel mount styles available
• Available with high temperature hyperboloid
contact technology
HRC (HyperRel Composite): Highlights
The HyperRel HRC is a high performance composite
connector intermateable with MIL-DTL-38999 Series III
connectors. The combination of the legendary Hypertac
contact with the superior design of the composite
shell/insert, along with the respective strain reliefs, favorably
influence intra-system life-cycle performance and costs.
Shells: The total performance of the HRC connector is
matched by the individual components within the system.
For example, the use of composite materials increases
the durability of the connector housing and coupling
mechanism to 1500 cycles.
Contacts:
• Up to 80% less mating force
• 50% reduction in resistance
• 300% increase in mating cycles
• Vibration/shock proven at 2 nano seconds
• Five times more contact elements than the
MIL-C-39029 (e.g. Size number 22)
• Hypertac contact life expectancy (fretting) is
100 times longer than the MIL-C-39029 contact
The HRC eliminates the largest contributing factor in
advanced systems malfunction: corrosion – the main cause
of mechanical, electrical, and electromagnetic connector
degradation. Electromotive force differentials between many
dissimilar metals found in connectors and accessories
produce galvanic action. The HRC eliminates these dissimilar
metals resulting in an interconnect system that withstands
over 2000 hours of salt spray.
Specifications:
EMI shielding effectiveness
Meets and exceeds the requirements of MIL-DTL-38999,
paragraph 3.3.1
Fluid immersion
Meets and exceeds the requirements of MIL-DTL-38999,
paragraph 3.33
Temperature
The metal surface will not delaminate from the composite
material even after extreme temperature excursions.
The HRC meets all requirements of MIL-DTL-38999,
paragraph 3.8
Magnetic permeability
The magnetic permeability of the fully assembled HRC
connector is less than 2.0 µ, meeting all the requirements
of MIL-DTL-38999, paragraph 3.3.4
Materials
All the materials used in the shell and inserts in the HRC
are in accordance with MIL-DTL-38999, paragraph 3.3.
The contacts are in accordance with MIL-C-39029,
paragraph 3.3
Finish
Shells: Meet the requirements of MIL-DTL-38999
Contacts: Meets the requirements of MIL-C-39029
Insulation resistance
Meets all the requirements of MIL-DTL-38999,
paragraph 3.13
Dielectric withstanding voltage
Meets all the requirements of MIL-DTL-38999,
paragraph 3.14
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 37
HyperRel Series
2 / 38 www.hypertronics.com
Dimensions are in inches [mm]
HRM (HyperRel Metal): Highlights
The HyperRel HRM is a high performance metal connector
with triple start, self-locking, threaded coupling and crimp-
type terminations, intermateable with MIL-DTL-38999
Series III.
HyperRel connectors are built upon the legendary Hypertac
contact technology that outperforms other interconnect
options in terms of performance reliability, number of mating
cycles, contact forces, contact resistance and value.
The HyperRel HRM has a rugged design that offers
the maximum in vibration, shock and EMI resistance.
A general duty threaded connector, the HRM series offers
thicker wall sections and greater coupling surface with
100% metal-to-metal bottoming, a superior anti-coupling
system, and proven dielectric contact retention. The positive
metal-to-metal coupling design, superior interfacial seals,
and cadmium over nickel plating provide excellent EMI,
moisture and corrosion resistance. In a 360 degrees turn
of the coupling nut, the HRM quickly mates and self-locks.
Blunting of the thread makes cross-threading virtually
impossible. Elongated mounting holes permit the HRM
connector to intermount with existing standard MS/38999
box or wall mount receptacles, providing a design
replacement advantage.
Specifications
Shock
High impact per MIL-S-901
EMI Shielding
Effective over a range of 100 MHz to 10 GHz
With a minimum 50 dB effectiveness at 10 GHz
Insulation Resistance
5000 megaohms min at 25° C (77° F)
Corrosion (Class W)
500 hours salt spray per MIL-DTL-38999
Crimp Contact Rating and Wire AWG
Size 22D: 5.0 Amps (accepts 22 thru 28 AWG)
Size 20: 7.5 Amps (accepts 20 thru 24 AWG)
Size 16: 13.0 Amps (accepts 16 thru 20 AWG)
Size 12: 23.0 Amps (accepts 12 thru 14 AWG)
Contact Resistance (Size 22D)
50% reduction in contact resistance compared to
MIL-C-39029
Vibration / Shock (Size 22D)
Proven at 2 nano seconds compared to MIL-C-39029
(which is proven at 1 micro second)
Fluid Immersion
Fluid resistant to many fuels, coolants and solvents
per MIL-DTL-38999
Mating Force
Up to 80% less mating force compared to
MIL-C-39029 requirements
Mating Cycles
300% increase in mating cycles compared to
MIL-C-39029 requirements
Contact Elements (Size 22D)
10 off springs compared to 2 off springs on a
MIL-C-39029 contact; five times more contact elements
means higher reliability
Contact Points (Size 22D)
10 off lines compared to 4 off points on a MIL-C-39029
contact; infinitely more points (reliability)
Fretting (Size 22D)
Hypertac hyperboloid contact has a life expectancy
100 times greater than MIL-C-39029 requires
Materials
Shell: Aluminum alloy
Contacts: Copper alloy
Inserts: Plastic; silicone
Finish
Shell: Olive drab cadmium over nickel (class W)
Nickel plated (class F)
Contacts: Gold over nickel
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 38
Dimensions are in inches [mm]
HyperRel Series
2 / 39
www.hypertronics.com
A full complement of HRC and HRM inserts
6 Size 22D Contacts
A35 (HRC)
9-35 (HRM)
3 Size 20 Contacts
A98 (HRC)
9-98 (HRM)
5 Size 20 Contacts
B05 (HRC)
11-5 (HRM)
13 Size 22D Contacts
B35 (HRC)
11-35 (HRM)
6 Size 20 Contacts
B98 (HRC)
7 Size 20 Contacts
B99 (HRC)
11-99 (HRM)
4 Size 16 Contacts
C04 (HRC)
13-4 (HRM)
8 Size 20 Contacts
C08 (HRC)
22 Size 22D Contacts
C35 (HRC)
13-35 (HRM)
10 Size 20 Contacts
C98 (HRC)
13-98 (HRM)
5 Size 16 Contacts
D05 (HRC)
15-5 (HRM)
18 Size 20 Contacts
D18 (HRC)
15-18 (HRM)
19 Size 20 Contacts
D19 (HRC)
3 Size 16 Contacts
2 Size 20 Contacts
18 Size 22 Contacts
D23 (HRC)
37 Size 22D Contacts
D35 (HRC)
15-35 (HRM)
4 Size 16 Contacts
8 Size 20 Contacts
D97 (HRC)
15-97 (HRM)
6 Size 12 Contacts
E06 (HRC)
17-6 (HRM)
8 Size 16 Contacts
E08 (HRC)
17-8 (HRM)
4 Size 16 Contacts
11 Size 20 Contacts
4 Size 22 Contacts
E19 (HRC)
26 Size 20 Contacts
E26 (HRC)
17-26 (HRM)
NOTE
Insert drawings are not to scale.
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 39
HyperRel Series
2 / 40 www.hypertronics.com
Dimensions are in inches [mm]
32 Size 20 Contacts
F32 (HRC)
19-32 (HRM)
66 Size 22D Contacts
F35 (HRC)
19-35 (HRM)
11 Size 12 Contacts
G11 (HRC)
21-11 (HRM)
16 Size 16 Contacts
G16 (HRC)
21-16 (HRM)
21 Size 20 Contacts
2 Size 16 Contacts
E99 (HRC)
11 Size 16 Contacts
F11 (HRC)
19-11 (HRM)
37 Size 20 Contacts
G39 (HRC)
79 Size 22D Contacts
G35 (HRC)
21-35 (HRM)
41 Size 20 Contacts
G41 (HRC)
21-41 (HRM)
55 Size 22D Contacts
E35 (HRC)
17-35 (HRM)
A full complement of HRC and HRM inserts
NOTE
Insert drawings are not to scale.
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 40
Dimensions are in inches [mm]
HyperRel Series
2 / 41
www.hypertronics.com
21 Size 16 Contacts
H21 (HRC)
23-21 (HRM)
100 Size 22D Contacts
H35 (HRC)
23-35 (HRM)
53 Size 20 Contacts
H53 (HRC)
23-53 (HRM)
55 Size 20 Contacts
H55 (HRC)
23-55 (HRM)
8 Size 16 Contacts
48 Size 20 Contacts
J04(HRC)
25-4 (HRM)
19 Size 12 Contacts
J19 (HRC)
25-19 (HRM)
12 Size 12 Contacts
12 Size 16 Contacts
J24 (HRC)
25-24 (HRM)
29 Size 16 Contacts
J29 (HRC)
25-29 (HRM)
A full complement of HRC and HRM inserts
128 Size 22D Contacts
J35 (HRC)
25-35 (HRM)
NOTE
Insert drawings are not to scale.
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 41
HyperRel Series
2 / 42 www.hypertronics.com
Dimensions are in inches [mm]
Arrangements are shown looking at mating face of plug.
Cavity identifying letters and numbers are for reference only.
Actual marking shall be as required by applicable specifications.
20 Size 16 Contacts
23 Size 20 Contacts
J43 (HRC)
61 Size 20 Contacts
J61 (HRC)
25-61 (HRM)
A full complement of HRC and HRM inserts
NOTE
Insert drawings are not to scale.
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 42
Dimensions are in inches [mm]
HyperRel Series
2 / 43
www.hypertronics.com
Mounting Cutouts
Back Panel Mounting
Max (R1) distance between
mounting screws
Front Panel Mounting
Max (R2) distance between
mounting screws
Square Flange Receptacle - HRC/HRM
Shell Size Accessory Thread P+0.004/-0.002 PP+0.004/-0.002 R1 R2 S ±0.001 Y Min. W Max.
HRC HRM HRC HRM HRC HRM
A 9 M12x1.0-6g 0.100R 0.128 [3.25] 0.216 [5.49] 0.719 [18.26] 0.594 [12.09] 0.937 [23.80] 0.769 [19.51] 0.822 [20.88] 0.144 [3.66] 0.098 [2.49]
B11 M15x1.0-6g 0.100R 0.128 [3.25] 0.194 [4.93] 0.812 [20.63] 0.719 [18.26] 1.031 [26.19] 0.769 [19.51] 0.822 [20.88] 0.144 [3.66] 0.098 [2.49]
C13 M18x1.0-6g 0.100R 0.128 [3.25] 0.194 [4.93] 0.906 [23.01] 0.812 [20.63] 1.126 [28.60] 0.769 [19.51] 0.822 [20.88] 0.144 [3.66] 0.098 [2.49]
D15 M22x1.0-6g 0.100R 0.098 [2.49] 0.769 [19.51] 0.822 [20.88] 0.144 [3.66] 0.098 [2.49] 0.769 [19.51] 0.822 [20.88] 0.144 [3.66] 0.098 [2.49]
E17 M25x1.0-6g 0.100R 0.098 [2.49] 0.769 [19.51] 0.822 [20.88] 0.144 [3.66] 0.098 [2.49] 0.769 [19.51] 0.822 [20.88] 0.144 [3.66] 0.098 [2.49]
F19 M28x1.0-6g 0.100R 0.098 [2.49] 0.769 [19.51] 0.822 [20.88] 0.144 [3.66] 0.098 [2.49] 0.769 [19.51] 0.822 [20.88] 0.144 [3.66] 0.098 [2.49]
G21 M31x1.0-6g 0.100R 0.126 [3.20] 0.736 [18.69] 0.791 [20.09] 0.171 [4.34] 0.126 [3.20] 0.736 [18.69] 0.791 [20.09] 0.171 [4.34] 0.126 [3.20]
H23 M34x1.0-6g 0.100R 0.126 [3.20] 0.736 [18.69] 0.791 [20.09] 0.171 [4.34] 0.126 [3.20] 0.736 [18.69] 0.791 [20.09] 0.171 [4.34] 0.126 [3.20]
J25 M37x1.0-6g 0.100R 0.126 [3.20] 0.736 [18.69] 0.791 [20.09] 0.171 [4.34] 0.126 [3.20] 0.736 [18.69] 0.791 [20.09] 0.171 [4.34] 0.126 [3.20]
Shell Size A Dis.
Min
AA Dis.
Min. R1 R2 T Dia.
±0.005
HRC HRM
A 9 0.656 [16.66] 0.516 [13.11] 0.719 [18.26] 0.594 [12.09] 0.128 [3.25]
B11 0.795 [20.19] 0.625 [15.88] 0.812 [20.63] 0.719 [18.26] 0.128 [3.25]
C13 0.922 [23.42] 0.750 [19.05] 0.906 [23.01] 0.812 [20.63] 0.128 [3.25]
D15 1.047 [26.59] 0.906 [23.01] 0.969 [24.61] 0.906 [23.01] 0.128 [3.25]
E17 1.219 [30.96] 1.016 [25.81] 1.062 [26.97] 0.969 [24.61] 0.128 [3.25]
F19 1.297 [32.94] 1.141 [28.98] 1.156 [29.36] 1.062 [26.97] 0.128 [3.25]
G21 1.442 [36.63] 1.266 [32.16] 1.250 [31.75] 1.156 [29.36] 0.128 [3.25]
H23 1.547 [39.29] 1.375 [34.93] 1.375 [34.93] 1.250 [31.75] 0.154 [3.91]
J25 1.572 [39.93] 1.485 [37.72] 1.500 [38.10] 1.375 [34.93] 0.154 [3.91]
NOTE:
R2 dimension may be substituted for mounting screw locations (R1) or front mount cutouts.
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 43
HyperRel Series
2 / 44 www.hypertronics.com
Dimensions are in inches [mm]
Jam Nut Receptacle - HRC/HRM
Jam Nut Mounting
Panel Thickness
0.062 - 0.126 [1.58 - 3.2]
Shell Size AØ ±0.011 B ±0.005 C Thread Accessory Thread
HRC HRM
A 9 1.189 [30.20] 0.650 [16.51] M17x1.0-6g 0.100R M12x1.0-6g 0.100R
B11 1.374 [34.90] 0.750 [19.05] M20x1.0-6g 0.100R M15x1.0-6g 0.100R
C13 1.500 [38.10] 0.937 [23.80] M25x1.0-6g 0.100R M18x1.0-6g 0.100R
D15 1.626 [41.30] 1.061 [26.95] M28x1.0-6g 0.100R M22x1.0-6g 0.100R
E17 1.752 [44.50] 1.186 [30.12] M32x1.0-6g 0.100R M25x1.0-6g 0.100R
F19 1.937 [49.20 1.311 [33.30] M35x1.0-6g 0.100R M28x1.0-6g 0.100R
G21 2.063 [52.40] 1.436 [36.47] M38x1.0-6g 0.100R M31x1.0-6g 0.100R
H23 2.189 [55.60] 1.561 [39.65] M41x1.0-6g 0.100R M34x1.0-6g 0.100R
J25 2.311 [58.70] 1.686 [42.15] M44x1.0-6g 0.100R M37x1.0-6g 0.100R
Shell Size Inch-Lbs.
Torque
E Flat
+0.000
-0.010
F
+0.010
-0.000
HRC HRM
A 9 30/36 0.670 [17.02] 0.700 [17.78]
B11 40/45 0.771 [19.58] 0.825 [20.96]
C13 55/60 0.955 [24.26] 1.010 [25.65]
D15 70/75 1.085 [27.56] 1.135 [28.83]
E17 80/85 1.210 [30.73] 1.360 [34.54]
F19 90/95 1.335 [33.90] 1.385 [35.18]
G21 100/110 1.460 [37.08] 1.510 [38.35]
H23 110/120 1.585 [40.26] 1.635 [41.53]
J25 120/130 1.710 [43.43] 1.760 [44.70]
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 44
Dimensions are in inches [mm]
HyperRel Series
2 / 45
www.hypertronics.com
Plug
Shell Size Accessory Thread AØ Max
HRC HRM
A 9 M12x1.0-6g 0.100R 0.858 [21.79]
B11 M15x1.0-6g 0.100R 0.984 [24.99]
C13 M18x1.0-6g 0.100R 1.157 [29.39]
D15 M22x1.0-6g 0.100R 1.280 [32.51]
E17 M25x1.0-6g 0.100R 1.406 [35.71]
F19 M28x1.0-6g 0.100R 1.516 [38.51]
G21 M31x1.0-6g 0.100R 1.642 [41.71]
H23 M34x1.0-6g 0.100R 1.768 [44.91]
J25 M37x1.0-6g 0.100R 1.890 [48.00]
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 45
HyperRel Series
2 / 46 www.hypertronics.com
Dimensions are in inches [mm]
Hypertronics Part Numbers HRM (Non-QPL'D Military Cross Reference)
HRC Ordering Information
HRM 20 35 X B 35 P N
11 P N D38999/ 20
X
Basic Identifier
HRM
HyperRel
Metal Series
Shell Style
20 = Square flange or
wall mount receptacle
24 = Jam nut receptacle
26 = Straight plug
Shell Style
20 = Square Flange or
Wall Mount Receptacle
24 = Jam Nut Receptacle
26 = Straight Plug
Shell Size
9, 11, 13, 15, 17, 19, 21, 23, 25
Contact
Gender
P = Pin
S = Standard socket
HS = High temperature socket
PN = No male contacts
SN = No female contacts
Shell Size
9 (A), 11 (B), 13 (C), 15 (D), 17 (E),
19 (F), 21 (G), 23 (H), 25 (J)
Class
W - Olive drab cadmium over nickel
F - Nickel plating
Class
W – Olive drab cadmium over nickel
F – Nickel plating
Insert
Arrangement
See pages 2/39 through 2/42
Insert
Arrangement
See pages 2/39
through 2/42
Shell Keying
N, A, B
Hypertronics Part Numbers
HRC XX XXX X XX
General
Identifier
HyperRel
Composite Series
Shell Style
90 = Square flange
94 = Jam nut mounting
96 = Straight plug
Contact
Gender
P = Pin
S = Standard socket
HS = High temperature socket
PN = No male contacts
SN = No female contacts
Shell Size
A(9), B(11), C(13), D(15), E(17),
F(19), G(21), H(23), J(25)
Class and
Finish
M = Nickel coating
W = Olive drab cadmium
Insert
Arrangement
See pages 2/39 through 2/42
Shell Keying
Positions
N, A, B, C, D, E
Shell Keying
N, A, B
Contact
Gender
P = Pin
S = Socket
Basic Military Identifier
HRC (Non-QPL'D Military Cross Reference)
X X XX X XD38999 XX
*Shell Style
20 = Square flange or
24 = Jam nut receptacle
26 = Straight plug
Shell Size
A(9), B(11), C(13), D(15), E(17),
F(19), G(21), H(23), J(25)
Class and
Finish
J = Olive drab cadmium
M = Nickel coating
Insert
Arrangement
See pages 2/39 through 2/42
Shell Key
N, A, B, C, D, E
Contact
Gender
P = Standard pin 500 cycle
S = Standard socket
500 cycle
H = Pine, extended life
1500 cycle contact
J = Socket extended life
15000 cycle contact
Specification Sheet Number
HRM Ordering Information
––
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 46
Dimensions are in inches [mm]
HyperRel Series
2 / 47
www.hypertronics.com
Contact and Tooling Information
Protective Covers for HRM Connectors
Available in both environmental and
environmental RFI/EMI (shielding)
Part Numbers
XX XXXX59503 X
Finish
D = Natural
E = Natural locking
M = Nickel, shielding, locking
W = Olive drab cadmium,
shielding, locking
Connector
Size
9, 11, 13, 15,17, 19, 21, 23, 25
Modification
1E = No lanyard
2E = Lanyard chain no ring
General
Identifier
59503 = Dust cover for
receptacles with
mounting chain and
retaining washer
Size
Contact
Hypertronics
Part Number
Style Wire Gauge Crimp Tool
(Positioner)
Military Insertion
Extraction Tool Strip Length
Sealing Plugs
Hypertronics
Part Number
Color Code
22D YPN0076-145H Pin 22 thru 28 M22520/7-01 M81969/14-01 0.160 - 0.190 [4.06 - 4.83] MS27488-22 Green
22D YSK0076-181AH Socket (Std.) 22 thru 28 M22520/7-01 M81969/14-01 0.160 - 0.190 [4.06 - 4.83] MS27488-22 Green
22D YHTSK0076-001AH Socket (High Temp.) 22 thru 28 M22520/7-01 M81969/14-01 0.160 - 0.190 [4.06 - 4.83] MS27488-22 Green
20 YPN0102-037H Pin 20 thru 24 M22520/1-01 M81969/14-10 0.230 -0.260 [5.84 - 6.60] 4113-4-2001 Red
20 YSK0102-095AH Socket (Std.) 20 thru 24 M22520/1-01 M81969/14-10 0.230 -0.260 [5.84 - 6.60] 4113-4-2001 Red
20 YHTSK0102-001AH Socket (High Temp.) 20 thru 24 M22520/1-01 M81969/14-10 0.230 -0.260 [5.84 - 6.60] 4113-4-2001 Red
16 YPN0158-003H Pin 20 thru 16 M22520/1-01 M81969/14-03 0.230 -0.260 [5.84 - 6.60] 0613-1-1601 Blue
16 YSK0158-012AH Socket (Std.) 20 thru 16 M22520/1-01 M81969/14-03 0.230 -0.260 [5.84 - 6.60] 0613-1-1601 Blue
16 YHTSK0158-001AH Socket (High Temp.) 20 thru 16 M22520/1-01 M81969/14-03 0.230 -0.260 [5.84 - 6.60] 0613-1-1601 Blue
12 YPN02309-001 Pin 12 thru 14 M22520/1-01 M81969/14-04 0.230 -0.260 [5.84 - 6.60] 0613-1-12-1 Yellow
12 YSK0239-001AH Socket (Std.) 12 thru 14 M22520/1-01 M81969/14-04 0.230 -0.260 [5.84 - 6.60] 0613-1-12-1 Yellow
12 YHTSK0239-001AH Socket (High Temp.) 12 thru 14 M22520/1-01 M81969/14-04 0.230 -0.260 [5.84 - 6.60] 0613-1-12-1 Yellow
–
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 47
HyperRel Series
2 / 48 www.hypertronics.com
Dimensions are in inches [mm]
Lightweight, Strain Relief, Tie-Type
The HRC provides additional environment protection by offering a systems approach to rear accessories. The HRC Strain Relief,
Tie-Type is made from durable, lightweight, corrosion proof composite materials, and is supplied with a secondary grommet.
The secondary grommet provides true strain relief and vibration dampening while providing dynamic moisture intrusion seals.
Shell
Size ±0.015 “A” Ø ±0.080 “B” ±0.010 “C” Ø “D” Metric Thread ±0.015 “E” ±0.080 “F” ± 0.010 “G” Ø
A0.650 [16.51] 1.948 [49.48] 0.140 [3.56] M12X1.0-6H0.100R 0.832 [21.13] 1.642 [41.71] 0.120 [3.05]
B0.775 [19.69] 2.010 [51.05] 0.140 [3.56] M15X1.0-6H0.100R 0.832 [21.13] 1.642 [41.71] 0.120 [3.05]
C0.905 [22.99] 2.075 [52.71] 0.140 [3.56] M18X1.0-6H0.100R 0.832 [21.13] 1.642 [41.71] 0.120 [3.05]
D1.030 [26.16] 2.135 [54.23] 0.140 [3.56] M22X1.0-6H0.100R 0.832 [21.13] 1.642 [41.71] 0.120 [3.05]
E1.160 [29.46] 2.198 [55.83] 0.140 [3.56] M25X1.0-6H0.100R 0.832 [21.13] 1.642 [41.71] 0.140 [3.56]
F1.270 [32.36] 2.258 [57.35] 0.140 [3.56] M28X1.0-6H0.100R 0.832 [21.13] 1.642 [41.71] 0.140 [3.56]
G1.400 [35.56] 2.320 [58.93] 0.140 [3.56] M31X1.0-6H0.100R 0.832 [21.13] 1.642 [41.71] 0.140 [3.56]
H1.525 [38.74] 2.383 [60.53] 0.140 [3.56] M34X1.0-6H0.100R 0.832 [21.13] 1.642 [41.71] 0.140 [3.56]
J1.655 [42.04] 2.445 [62.10] 0.140 [3.56] M37X1.0-6H0.100R 0.832 [21.13] 1.642 [41.71] 0.140 [3.56]
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 48
Dimensions are in inches [mm]
HyperRel Series
2 / 49
www.hypertronics.com
Strain Relief Ordering Information
Cable Insert Arrangements
Hypertronics Strain Relief Part Numbers
HRC00 XXXXXX XB
General
Identifier
HyperRel Composite Series
Rear Accessories
Finish A = Black composite, unplated
M = Nickel, plated
*W = Olive drab cadmium
Contact
Style
P = Pin
S = Socket
Type EL = Straight
EN = 90 degree
Shell Size A(9), B(11), C(13), D(15), E(17),
F(19), G(21), H(23), J(25)
Cable
Code
See Cable Insert
Arrangement Table
Cable Code Insert
Arrangements
38 A-35
39 A-98
40 B-05
41 B-35
42 B-99
43 C-04
44 C-35
45 C-98
46 D-05
47 D-18
48 D-35
49 D-97
50 E-06
51 E-08
52 E-26
Cable Code Insert
Arrangements
53 E-35
54 F-11
55 F-32
56 F-35
57 G-11
58 G-16
59 G-35
60 G-41
61 H-21
62 H-35
63 H-53
64 H-55
65 J-04
66 J-19
67 J-20
Cable Code Insert
Arrangements
68 J-24
69 J-29
70 J-35
71 J-61
92 B-98
93 D-19
94 C-08
95 E-99
96 G-39
97 J-43
98 D-23
99 E-19
100 D-26
*Consult factory for availability.
––
HYP_08_2sec11.qxd:Layout 1 7/31/08 10:49 AM Page 49
