Catalog 1308242 Issued 3-03 OEG OMI/OMIH series 16A Miniature Power PC Board Relay Appliances, HVAC, Office Machines. UL File No. E58304 CSA File No. LR48471 VDE File No. 6678 SEMKO File No. 9517235 (OMI) 9143112 (OMIH) Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20C Features * Meet UL 508, VDE0435 and SEMKO requirements. * 1 Form A and 1 Form C contact arrangements. * Immersion cleanable, sealed version available. * Meet 5,000V dielectric voltage between coil and contacts. * Meet 10,000V surge voltage between coil and contacts (1.2 / 50s). Contact Data @ 20C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Ag Alloy (OMI), AgSnO (OMIH). Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Contact Ratings Ratings: OMI: 10A @ 240VAC resistive, 10A @ 30VDC resistive, 3A @ 240VAC inductive (coso= 0.4), 3A @ 30VDC inductive (L/R=7msec). OMIH:16A @ 240VAC resistive, 16A @ 30VDC resistive, 4A @ 240VAC inductive (coso= 0.4), 4A @ 24VDC inductive (L/R=7msec). Max. Switched Voltage: AC: 250V. DC: 30V. Max. Switched Current: 10A (OMI), 16A (OMIH). Max. Switched Power: OMI: 2,400VA, 300W. OMIH: 3,800VA, 480W. OMI/OMIH-L Sensitive Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 106.4 88.0 58.0 44.4 21.8 10.9 47 68 155 270 1,100 4,400 3.75 4.50 6.75 9.00 18.00 36.00 0.50 0.60 0.90 1.20 2.40 4.80 Rated Coil Voltage (VDC) Nominal Current (mA) Coil Resistance (ohms) 10% Must Operate Voltage (VDC) Must Release Voltage (VDC) 5 6 9 12 24 48 138.9 120.0 78.3 60.0 29.3 14.5 36 50 115 200 820 3,300 3.50 4.20 6.30 8.40 16.80 33.60 0.50 0.60 0.90 1.20 2.40 4.80 OMI/OMIH-D Standard Operate Data Must Operate Voltage: OMI/OMIH-D: 70% of nominal voltage or less. OMI/OMIH-L: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: OMI/OMIH-D: 15 ms max. OMI/OMIH-L: 20 ms max. Release Time: 8 ms max. Environmental Data Initial Dielectric Strength Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 5,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50s). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Temperature Range: Operating: OMI/OMIH-D: -30C to +55C OMI/OMIH-L: -30C to +70 C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Shock, Mechanical: 1,000m/s2 (100G approximately). Operational: 100m/s2 (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Coil Data Mechanical Data Voltage: 5 to 48VDC. Nominal Power: 720 mW (OMI-D), 540mW (OMI-L). Coil Temperature Rise: 45C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): OMI/OMIH-SS: Vented (Flux-tight) plastic cover. OMI/OMIH-SH: Sealed plastic case. Weight: 0.46 oz (13g) approximately. Dimensions are shown for 458 reference purposes only. Dimensions are in inches over (millimeters) unless otherwise specified. Specifications and availability subject to change. www.tycoelectronics.com Technical support: Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number 1. Basic Series: OMI = 10A rating B OMIH -SH -1 24 L ,294 OMIH = 16A rating 2. Enclosure: SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 5. Coil Input: D = Standard (720mW) L = Sensitive (540mW) 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Suffix: ,300 = Standard model for "SS" enclosure ,394 = Standard model for "SH" enclosure Other Suffix = Custom model Our authorized distributors are more likely to stock the following items for immediate delivery. OMIH-SH-105L,394 OMIH-SH-112L,394 OMIH-SH-124L,394 OMIH-SH-105D,394 OMIH-SH-112D,394 OMIH-SH-124D,394 Wiring Diagram (Bottom View) Outline Dimensions .811 .02 (20.6 .5) .157 .012 (4.0 .3) .02 (.5) .012 (.3) .024 c (.60) .039 (1.0) .039 (1.0) .012 (.3) .100 .008 (2.55 .2) 1.15 .02 (29.2 .5) PC Board Layout (Bottom View) 3 - .059 DIA (1.5) .504 .02 (12.8 .5) .30 .008 (7.6 .2) .650 (16.5) .30 .004 (7.6 .1) 2 - .047 DIA (1.2) .144 (3.65) .138 .004 (3.5 .1) .138 .004 (3.5 .1) .650 .004 (16.5 .1) .138 (3.5) .138 (3.5) Reference Data Coil Temperature Rise Operate Time 60 12 50 10 40 8 Life Expectancy 100 OMIH type 240VAC, 24VDC Resistive 30 20 4 Operation (x 10 ) Time (msec) Temp. Rise (C) Operate Time 6 4 10 OMI type 250VAC, 30VDC Resistive 2 10 Release Time 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Coil Power (W) Dimensions are shown for reference purposes only. 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Coil Power (W) Dimensions are in inches over (millimeters) unless otherwise specified. 1 0 2 4 6 8 10 12 14 16 18 20 Contact Current (A) Specifications and availability subject to change. www.tycoelectronics.com Technical support: 459 Refer to inside back cover.