Plastic Film Capacitors Stacked Metallized PEN Film Chip Capacitor Type : ECWU(C) Stacked metallized PEN film as dielectric with simple mold-less construction Features Small in size For reflow soldering RoHS directive compliant Recommended Applications General purpose (Coupling, By-pass) Explanation of Numbers 1 2 3 4 Product code 5 Rated voltage 1 2 2 3 4 Product code Dielectric & construction 7 9 10 J K 100 VDC 250 VDC 5 6 7 8 1 1 0 4 Rated voltage 1 11 12 3 9 V Suffix Tape width 12 mm 16 mm 11 3 Suffix Small in size, Cap. Tol. : 5 , Tape width : 12 mm 2 3 4 5 6 7 Dielectric & construction 10 Suffix 5 10 9 Capacitance 100 VDC Suffix Cap. Tol. Capacitance 1 Product code 8 Dielectric & construction 1 6 Rated voltage 2J 8 9 10 Capacitance 630 VDC J 11 12 Cap. Tol. 5 Specification V Suffix Tape width 16 mm Category temp. range (Including temperature-rise on unit surface) - 55 C to +125 C Rated voltage 100 VDC, 250 VDC, 630VDC (Derating of rated voltage by 1.25% / C more than 85C) Capacitance range 100 VDC 250 VDC 0.012 F to 1.0 F (E12) 0.0010 F to 0.12 F (E12) 630 VDC 0.022 F, 0.027 F, 0.033 F Capacitance tolerance 100 VDC 250 VDC 630 VDC 5 %(J), 10 %(K) ( C0.18 F 10 %(K) only) 5 %(J), 10 %(K) 5 %(J) Withstand voltage Between terminals Rated volt. (VDC)x150 % 60 s Dissipation factor (tan) Insulation resistance (IR) Soldering conditions tan1.0 % (20 ,1 kHz) C0.33 F 100 VDC, 250 VDC, 630 VDCIR3000 (20 , 100 VDC, 60 s) C0.33 F 100 VDCIR1000 MF (20 , 100 VDC, 60 s) 100 VDC 250 VDC Reflow soldering 240C max. and 60 s max. at more than 220C (Temp. at cap. surface ) Please consult us for Reflow 250 max product. Reflow soldering250C max. and 60 s to 150s. at more than 217C 630 VDC (Temp. at cap. surface ) *In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of "Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage". *Please consult us for capacitance range between 0.15 F and 1.0 F.(250 VDC) DesignSpecifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt safety arises from this product, please inform us immediately for technical consultation without fail. Plastic Film Capacitors Dimensions in mm(not to scale) Construction Size code (0.4)*** W0.3 H0.2 (0.3)*** (0.5)** (0.4)* L0.2 0.350.20 0.350.20 Outer electrode (Lead free) Element (stacked) * To be applied only for size Z, Y, X ** To be applied only for size V *** To be applied only for size B, Z, Y, X, V E1 E2 E3a E3 D1 D2 D3 D4 D5 B Z Y X V L 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 6.0 6.0 7.1 7.1 7.7 9.8 W 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 4.1 5.0 5.0 6.3 5.5 6.3 H 1.4 2.0 2.4 2.8 1.8 2.0 2.4 2.8 3.2 Refer to the column "RatingDimensions & Quantity". Taping Specification for Automatic Mounting Refer to the taping specification. RatingDimensions & Quantity / Reel Capacitance tolerance:5 %(J),10 %(K) Rated volt. 100 VDC Cap. (F) 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 Part No. Dimensions (mm) L W H Size code Rated volt. Quantity Please use DC100V rating of ECWU(X ECWU1123C9 ECWU1153C9 ECWU1183C9 ECWU1223C9 ECWU1273C9 ECWU1333C9 ECWU1393C9 ECWU1473C9 ECWU1563C9 ECWU1683C9 ECWU1823C9 ECWU1104C9 ECWU1104V33 ECWU1124C9 ECWU1154C9 ECWU1184KC9 ECWU1224KC9 ECWU1274KC9 ECWU1334KC9 ECWU1394KCV ECWU1474KCV ECWU1564KCV ECWU1684KCV ECWU1824KCV ECWU1105KCV 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 6.0 4.8 6.0 6.0 7.1 7.1 7.1 7.1 7.7 7.7 9.8 9.8 9.8 9.8 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 4.1 3.3 4.1 4.1 5.0 5.0 5.0 5.0 5.5 5.5 6.3 6.3 6.3 6.3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 2.0 2.0 2.4 2.8 1.8 2.8 2.4 2.8 2.0 2.4 2.9 3.5 3.4 4.0 3.0 3.6 4.3 5.1 E1 E1 E1 E1 E1 E1 E1 E2 E2 E3a E3 D1 E3 D3 D4 Z Z Z Z X X V V V V 3,000 2,000 3,000 2,000 Part No. ECWU2102C9 ECWU2122C9 ECWU2155C9 ECWU2182C9 ECWU2222C9 ECWU2272C9 ECWU2332C9 ECWU2392C9 ECWU2472C9 ECWU2562C9 ECWU2682C9 ECWU2822C9 ECWU2103C9 ECWU2123C9 ECWU2153C9 ECWU2183C9 ECWU2223C9 ECWU2273C9 ECWU2333C9 ECWU2393C9 ECWU2473C9 ECWU2563C9 ECWU2683C9 ECWU2823C9 ECWU2104C9 ECWU2124C9 2,000 250 VDC Dimensions (mm) L W H 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 6.0 6.0 6.0 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 5.0 5.0 5.0 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 2.0 2.0 2.4 2.8 2.0 2.4 2.8 3.2 3.2 3.8 4.5 Size code E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E2 E2 E3a E3 D2 D3 D4 D5 B B B Quantity 3,000 2,000 3,000 2,000 1,500 Cap. tol. code 1,500 1,000 Cap. tol. code DesignSpecifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt safety arises from this product, please inform us immediately for technical consultation without fail. Plastic Film Capacitors RatingDimensions & Quantity / Reel Capacitance tolerance : 5 %(J) Rated volt. 630 VDC Cap. (F) Part No. 0.022 0.027 0.033 ECWUC2J223JV ECWUC2J273JV ECWUC2J333JV Dimensions (mm) L W H 7.1 7.1 7.1 6.3 6.3 6.3 3.6 4.1 5.1 Size code Y Y Y Quantity 1000 Recommened for Land Dimensions(mm) Electrode Size code Land C A B E1,E2,E3a,E3 D1,D2,D3,D4,D5 B Z Y X V Land dimensions Reflow soldering A B C 2.6 6.6 3.0 3.8 7.8 3.8 3.8 7.8 4.6 4.5 9.0 4.6 4.5 9.0 5.7 5.1 9.7 5.0 7.2 11.9 5.7 DesignSpecifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt safety arises from this product, please inform us immediately for technical consultation without fail. ECWU (C) Type DC100V series (Stacked Metallized Film) Electrical Characteristics < Typical Data > Temperature Characteristics Frequency Characteristics at 1kHz 10 10 Capacitance change(%) Capacitance change(%) 1.0uF 5 From 0.012uF to 1.0uF 0 -5 -10 0.47uF 5 0.10uF 0.047uF 0 0.012uF -5 -10 1 -60 -40 -20 0 20 40 60 80 100120 140 10 1000 10000 Frequency (kHz) Temperature(Dgree C) at 1kHz 10 10 8 8 Dissipation factor(%) Dissipation factor(%) 100 6 4 2 From 0.012uF to 1.0uF 0 1.0uF 6 0.47uF 0.10uF 4 0.047uF 2 0.012uF 0 -60 -40 -20 0 20 40 60 80 100 120 140 1 10 Temperature (Degree C) 100 1000 10000 Frequency (kHz) at DC 100V 10000 1000 1.E+11 From 0.012uF to 0.047uF 1.E+10 1.0uF 1.E+09 1.E+08 1.E+07 Impedance(ohm) Insuration resistance(ohm) 1.E+12 0.0 47 uF 100 0.0 0.1 1.0 u 10 F 12 uF 0u F 0.4 7u F 1 0.1 0.01 1.E+06 -60 -40 -20 0 20 40 60 80 100 120140 Temperature (Degree C) 0.001 1 10 100 1000 10000 100000 Frequency(kHz) ECWU (C) Type DC100V series (Stacked Metallized Film) Applicable Specifications Permissible current Permissible current 3 3 Effective value (A) Effective value (A) 0.68 uF 2 0.068 uF, 0.056 uF 0.039 uF, 0.033 uF 1.0 uF 0.82 uF 0.56 uF, 0.47 uF 2 0.39 uF 0.15 uF 0.082 uF 0.027 uF, 0.022 uF 1 1 0.047 uF 0.018 uF, 0.015 uF 0.33 uF, 0.27 uF 0.012 uF 0.22 uF, 0.18 uF 0.12 uF, 0.10 uF 0 0 1 10 100 1 1000 Permissible voltage Permissible voltage (at sine wave) 10 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.056 0.068 0.082 (at sine wave) 100 Effective value (V) Effective value (V) 1000 Frequency (kHz) Frequency (kHz) 100 100 10 10 uF uF uF uF uF uF uF, 0.047 uF uF uF uF 0.22 uF 0.27 uF 0.33 uF 0.39 uF 0.47 uF 0.56 uF 0.10 uF 0.12 uF 0.68 uF 0.82 uF 1 1 10 100 Frequency (kHz) 1000 1.0 uF 1 1 100 10 Frequency (kHz) 0.15 uF 0.18 uF 1000 * Please consult Panasonic if your condition exceeds the above spec. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current value (Aop) is calculated using "nominal capacitance." In fact, it changes by the tolerance of a capacitance value, capacitance change, etc. 120 100 80 60 40 20 ECWU (C) Type DC250V series (Stacked Metallized Film) Electrical Characteristics < Typical Data > Temperature Characteristics at 1kHz 5 10 From 1000pF to 1.0uF 0 -5 Capacitance change(%) Capacitance change(%) 10 Frequency Characteristics -10 5 1.0uF 0.10uF 0 0.010uF 1000pF -5 -10 1 -60 -40 -20 0 20 40 60 80 100 120140 10 Temperature (Degree C) 1000 10000 Frequency (kHz) at 1kHz 10 Dissipation factor(%) 10 Dissipation factor(%) 100 8 6 4 2 From 1000pF to 1.0uF 8 6 1.0uF 0.10uF 4 0.010uF 2 1000pF 0 0 -60 -40 -20 0 20 40 60 80 100120 140 1 10 Temperature (Degree C) 100 1000 10000 Frequency (kHz) at DC 100V 10000 1000 1.E+11 From 1000pF to 0.10uF 1.E+10 1.E+09 1.0uF 1.E+08 Impedance(ohm) Insuration resistance(ohm) 1.E+12 1000pF 100 0.010uF 10 1.0uF 1.E+07 0.1 1.E+06 0.01 -60 -40 -20 0 20 40 60 80 100120 140 Temperature (Degree C) 0.10uF 1 1 10 100 1000 10000 100000 Frequency (kHz) ECWU (C) Type DC250V series (Stacked Metallized Film) Applicable Specifications Permissible current Permissible current 1 3 0.027 uF 0.010uF, 8200pF 0.022 uF 0.018 uF 0.5 5600pF, 4700pF 0.015 uF 0.012 uF Effective value (A) Effective value (A) 0.68 uF, 0.39uF 1.0 uF 0.82 uF 0.18uF, 0.27uF 2 0.47 uF 0.12 uF, 0.15uF 0.56 uF 0.33 uF 0.22 uF 6800 pF 1 3900 pF 3300 up 2700 pF 2200 pF 1800 pF 1500 pF 1200 pF 1000 pF 0.10 uF 0.056 0.047 0.033 0.039 uF uF uF uF 0.068uF, 0.082uF 0 100 10 1 0 0.1 1000 1 10 Permissible voltage 1000 Permissible voltage (at sine wave) (at sine wave) 100 1000pF 10 10 0.033 uF ~ 0.027 uF Effective value (V) 100 ~ Effective value (V) 100 Frequency (kHz) Frequency (kHz) 1 1 1.0 uF 0.1 0.1 1 10 Frequency (kHz) 100 1000 0.1 0.1 1 10 Frequency (kHz) 100 * Please consult Panasonic if your condition exceeds the above spec. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P ) value is calculated using nominal capacitance. 1000 ECWU (C) Type DC250V series (Stacked Metallized Film) Applicable Specifications Pulse Handling Capability (dv/dt) (Max 10000cycles) Rating Voltage Capacitance Value(uF) Code Capacitance Value(uF) Code 0.0010 102 0.62 0.039 393 9.36 0.0012 122 0.74 0.047 473 11.28 0.0015 152 0.92 0.056 563 13.44 0.0018 182 1.11 0.068 683 dv/dt(V/us) Current(0-P ) (A) Rating Voltage dv/dt(V/us) 240 Current(0-P ) (A) 16.32 615 DC 250V 0.0022 222 1.35 0.082 823 19.68 0.0027 272 1.66 0.10 104 24.00 0.0033 332 2.03 0.12 124 28.80 0.0039 392 2.40 0.15 154 28.50 0.0047 472 1.69 0.18 184 0.0056 562 2.02 0.22 224 41.80 0.0068 682 2.45 0.27 274 31.05 0.0082 822 2.95 0.33 334 DC 250V 190 34.20 37.95 115 0.010 103 3.60 0.39 394 44.85 0.012 123 4.32 0.47 474 54.05 0.015 153 5.40 0.56 564 36.40 0.018 183 6.48 0.68 684 360 44.20 65 0.022 223 7.92 0.82 824 53.30 0.027 273 9.72 1.0 105 65.00 0.033 333 11.88 DC Rated Voltage (V) 300 Voltage Derating by Temperature 250 200 150 125 100 50 0 -60 -40 -20 0 20 40 60 80 100 120 140 Surface Temperature of Capacitor(Degree C) * Please consult Panasonic if your condition exceeds the above spec. *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P ) value is calculated using nominal capacitance. TYPE:ECWU (C) DC630V series (Stacked Metallized Film) Electrical Characteristics <Typical Data > Temperature Characteristics at 1kHz 10 5 0 0.022uF, 0.033uF -5 Capacitance change(%) Capacitance change(%) 10 Frequency Characteristics -10 -60 -40 -20 0 20 40 60 0.033uF 5 0 -5 -10 1 80 100 120 140 10 Temperature(Degree C) at 1kHz 1000 10 4 3 2 0.022uF, 0.033uF 1 0 10000 0.033uF 0.022uF 8 6 4 2 0 -60 -40 -20 0 20 40 60 80 100 120 140 1 10 Temperature(Degree C) 100 1000 10000 Frequency(kHz) at DC100V 1.E+12 10000 0.022uF 0.022uF,0.033uF 1.E+11 1000 Impedance(ohm) Insulation resistance(ohm) 100 Frequency(kHz) Dissipation factor(%) Dissipation factor(%) 5 0.022uF 1.E+10 1.E+09 1.E+08 0.033uF 100 10 1 0.1 1.E+07 0.01 1.E+06 -60 -40 -20 0 20 40 60 80 100 120 140 Temperature(Degree C) 1 10 100 1000 10000 100000 Frequency(kHz) 140 Panasonic Caution about Safety in Use 3.1. Washing of chip type Since the chip type capacitor does not have a coating, components of flux or detergent left over on the element at the time of washing may be activated and invade into the inside of the capacitor, and adverse effects may be caused. Observe the following cautions. In the case of washing, use flux and cream solder with halogen content of 0.1wt.% or less when mounting. In the case of ultrasonic washing, note that peeling of protective film, electrode separation due to resonance, or characteristic deterioration may occur depending on the detergent used or ultrasonic output. Check carefully beforehand. When using a CFC substitute detergent, with the washing method of spraying detergent (rinsing water) to the substrate at high pressure, the protective film on the element surface may be peeled off due to the water pressure. Check carefully beforehand. 2.4.2 Cautions for use of soldering iron Be careful that the soldering irons do not directly touch the main body of the chip film capacitor. In particular, don't touch the side (cut section). If touched by the heated soldering iron, lowering of insulation resistance, shortcircuit or other characteristic deterioration may occur. Preheat the printed wining board land sufficiently with the soldering iron, and then solder. Solder without directly touching the iron tip to the electrode of the capacitor. Don't reuse the products once removed by the soldering irons. Should not mount the chip film capacitors in the mass production by soldering iron. (The temperature control is difficult, and the characteristics may be deteriorated.) Should not resolder with heat directly from bottom side of P. W. Board. because capacitor will likely be damaged. 3. Washing the mounted boards Usable detergent and washing method (Usable detergent Classification Detergent name Alcohol derivative Maker IPA (isopropyl alcohol) Halogenated hydrocarbon (Reagent for general industrial use) AK-225AES (Washing method) Condition Item Asahi Glass Co. Temperature Tine Immersion washing 50 Within 5 minutes Steam washing 50 Within 5 minutes Ultrasonic washing 50 Within 5 minutes <CFC substiture detergent> As a result of regulation of CFC and chlorine derivative detergents, many substitute detergents come to be used, but the performance of the chip type capacitor may be reduced depending on the type of detergent or washing condition. Check sufficiently beforehand. Consult us in advance if planning to use CFC substitute detergent. 3.2. Washing of leaded type The film capacitor varies significantly in the effect of washing depending on the structure and material, and generally it is less affected by CFC or alcohol derivative washing solvent, and is likely to be affected by highly polar solvent. The lead type film capacitor is coated with an epoxy resin excellent in chemical resistance, and is hardly affected by detergent, but it is recommended to be washed for short duration. <Drying after washing> Dry after washing so that the detergent is not left over. If drying is insufficient, the detergent is left over on the element surface, and the insulation resistance is measured to be lowered. Dry enough so as not to leave detergent. Applicability of detergents in film capacitors is listed for reference. DesignSpecifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. 11 Sep. 2008 Panasonic Caution about Safety in Use List of applicability of detergents Box type Washing condition Chip type Lead type Ethanol Ultrasonic washing or immersion washing for 5 min Isopropyl alcohol (IPA) Ultrasonic washing or immersion washing for 5 min FRW-17 Ultrasonic washing for 5 min, 60 FRW-1N Ultrasonic washing for 5 min, 60 FRW-100 Steam drying for 1 min, 100 Asahi Clean AK-225AES Ultrasonic washing or immersion washing for 5 min HCFC141b-MS Ultrasonic washing or immersion washing for 5 min P3 Cold Cleaner 225S Ultrasonic washing for 5 min 60 IPA ultrasonic rinsing for 5 min at ordinary temperature hot air drying for 5 min, 40 Toluene Ultrasonic washing or immersion washing for 5 min x Terpene Cleaner EC-7 Spray washing for 5 min at ordinary temperature purified water spraying for 5 min, 50 hot air drying for 5 min, 80 x Ultrasonic washing for 5 min 60 wind-free drying for 5 min, 85 x Clean Through 750H Ultrasonic washing for 5 min, 60 purified water ultrasonic washing for 5 min, 60 hot air drying for 5 min, 85 x Clean Through 750L Ultrasonic washing for 5 min, 60 purified water ultrasonic washing for 5 min, 60 hot air drying for 5 min, 85 x Clean Through 710M Ultrasonic washing for 5 min, 60 purified water ultrasonic washing for 5 min, 60 hot air drying for 5 min, 85 x Clean Through LC-841 Ultrasonic washing for 5 min, 60 purified water ultrasonic washing for 5 min, 60 hot air drying for 5 min, 85 x Ultrasonic washing for 5 min, 60 purified water ultrasonic washing for 5 min, 60 hot air drying for 5 min, 85 x Shower washing for 1 min, 60 purified water ultrasonic washing for 5 min, 60 hot air drying for 5 min, 85 x ECQUL Alcohol Solvent Silicon Halogen Petroleum hydrocarbon Terpene Water Purified water Surface active agent : Washing enabled Wash-fre e Wash-free flux Low residue flux Inactivated flux x : Washing disabled : Not confirmed ULF-500VS AM-173 Washing disabled (x mark) detergent should be avoided because the appearance may be impaired, the characteristic may be deteriorated, and the reliability cannot be guaranteed DesignSpecifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. -12- Jul. 2011