Interface Connectors
IEEE1394 4PConnectors
■ Features
1. Most suitable for multimedia operations such as MPEG
system image transfer through the isochronous transfer
mode.
2. Use-friendly with a fine and flexible cable measuring only
π4mm with 4 signal wires.
3. Smaller than a 6P IEEE 1394 connector yet sufficiently
strong enough to help design smaller equipment.
■ Specification
1. Rating : 0.5A, 5V DC
2. Contact Resistance : 30mΩmax.
3. Insulation Resistance : 100MΩmin. at 100V DC
4. Withstanding Voltage : 100V AC (for one minute)
5. Operating Life : 3,000 cycles
■ Material and Plating
●Socket
Housing : Thermoplastic Resin, Black, 94V-0
Terminal : Cu Alloy, Selective Au Plating or Au Plating
Shield Case : Cu Alloy, Sn Cu Plating or Ni Plating
●Plug
Housing : Thermoplastic Resin, Black, 94V-0
Contact : Cu Alloy, Au Plating
Cover : Thermoplastic Resin, Black, 94V-0
■ Outline
A connector applicable for the IEEE 1394 standards for a
serial bus and interface. Peripherals of audio-visual
equipment and personal computers which are increasingly
digitalized can be connected through the same interface
meeting IEEE 1394 requirements.