Agilent 34138A Test Lead Set
Opera ti ng Instructions
This Test Lead Set is designed for use with the Agilent 34xxxA Multimeters, and als o
the U2741A, U3401A, and U3402A Multimeters. Do not use with the Agilent 345 8A.
Assistance
For technic al assistance, c ontact your nearest Agilent Sales Office. Or visit the
Agilent web site at www.agilent.com/find/assist for further information.
Agilent Technologies, Inc.
900 S. Taft Avenue
Loveland, CO 80537 U.S.A.
Symbols
Refer to instrument manual for additional safety information.
CAT II IEC Measurement Category II. Refer to instrument manual
for additional information.
Ratings Quantity
Test Leads – 1000V, 15A 2 pieces
Fine Tip Probe Attachments – 300V, 3A 2 pieces
Mini Grabber Attachment – 300V, 3A 1 piece
SMT Grabber Attachments – 300V, 3A 2 pieces
Operation
· Refer to the multim eter user's guide for further information.
· The Fine Tip, Mini Grabber, and SMT Grabber attachments plug onto the
probe end of the Test Leads.
WARNING: If Test Lead Set is used in a manner not specified by Agilent
Technologies, the protection provided by the Test Lead Set may be impaired.
Instrument damage or personal injury may result.
Maintenance
If any portion of the Test Lead Set is worn or damaged, do not use; replace with
a new Test Lead Set.
*34138-90000*
E0213 34138-90000
Agilent 34138A Test Lead Set
Opera ti ng Instructions
This Test Lead Set is designed for use with the Agilent 34xxxA Multimeters, and als o
the U2741A, U3401A, and U3402A Multimeters. Do not use with the Agilent 345 8A.
Assistance
For technic al assistance, c ontact your nearest Agilent Sales Office. Or visit the
Agilent web site at www.agilent.com/find/assist for further information.
Agilent Technologies, Inc.
900 S. Taft Avenue
Loveland, CO 80537 U.S.A.
Symbols
Refer to instrument manual for additional safety information.
CAT II IEC Measurement Category II. Refer to instrument manual
for additional information.
Ratings Quantity
Test Leads – 1000V, 15A 2 pieces
Fine Tip Probe Attachments – 300V, 3A 2 pieces
Mini Grabber Attachment – 300V, 3A 1 piece
SMT Grabber Attachments – 300V, 3A 2 pieces
Operation
· Refer to the multim eter user's guide for further information.
· The Fine Tip, Mini Grabber, and SMT Grabber attachments plug onto the
probe end of the Test Leads.
WARNING: If Test Lead Set is used in a manner not specified by Agilent
Technologies, the protection provided by the Test Lead Set may be impaired.
Instrument damage or personal injury may result.
Maintenance
If any portion of the Test Lead Set is worn or damaged, do not use; replace with
a new Test Lead Set.
*34138-90000*
E0213 34138-90000
© Agilent Technologies, Inc. 2013 February 2013
