885043 RFMD + TriQuint = Qorvo Not for New Designs B38/B40 Tx filters Applications For Band 38 and Band 40 TD-LTE applications TD-LTE B38/B40 handset, datacards, mobile routers 1.7 x 1.3 x 0.46 mm Product Features Functional Block Diagram Top view Highly selective BAW filters achieving low insertion loss over full bandwidth and operating conditions Rejection in WLAN band of 40dB minimum Rejection in B7 Rx band of 20dB minimum Single antenna port, diplexing Performance -20 to +85 C RoHS compliant, Pb/halogen-free module package 8 9 10 6 5 2 1 General Description 7 3 4 Pin Configuration The 885043 is a high-performance Bulk Acoustic Wave (BAW) Tx filter module designed to meet the strict TD-LTE rejection requirements for use in B38 and B40. 885043 is specifically designed to meet the high performance expectations of insertion loss and rejection for TD-LTE receive systems under all operating conditions. The 885043 uses common module packaging techniques to achieve the industry standard 1.7 x 1.3 x 0.46 mm footprint. Pin # Description 1 B38 Tx 4 B40 Tx 7 B40 Antenna 8 B38 Antenna 2,3,5,6,9,10 Ground* *Note, see application section for details on optimal grounding Ordering Information Part No. Description 885043 885043-EVB Packaged part Evaluation board Standard T/R size = 10,000 units/reel. Final Data Sheet: Rev D 10/26/2017 (c) 2015 TriQuint - 1 of 9 - Disclaimer: Subject to change without notice e www.triquint.com/www.qorvo.com (R) Not for New Designs 885043 Not for New Designs B38/B40 Tx filters RFMD + TriQuint = Qorvo Specifications Electrical Specifications [1] (TEMPOP = -20 to +85C, Characteristic Impedance [ZO] = 50 , Unless Otherwise Noted) Parameter Conditions Min Typ[2] Max Unit 2.3 2.3 2.7 3.0 dB dB dB Comment B38 Tx Insertion Loss VSWR (In & Out) Absolute Attenuation 2570-2615 MHz 2615-2620 MHz 2.2 3.4 2570-2620 MHz 2.0:1 2.1:1 Ta=+25C Ta=-20 to +85C Ta=-20 to +85C 10-1574 MHz 35 37 dB 1559-1606 MHz 35 37 dB 1606-2300 MHz 35 37 dB 2400-2500 MHz 37 42 dB 2645-2670 MHz 12 16 dB 5140 -5240 MHz 30 38 dB 2nd Harmonic 7710-7860 MHz 25 35 dB 3rd Harmonic IMD2 -106 dBm IMD3 -120 dBm H2 -35 dBm B40 Tx Insertion Loss VSWR In & Out Attenuation 2300-2395 MHz 2.4 2.4 2.6 3.3 dB dB 2395-2400 MHz 2.7 3.6 dB 2300-2400 MHz 1.8 2.1:1 10-1574 MHz 30 33 dB 1574-1577 MHz 28 33 dB 1577-1680 MHz 27 31 dB 1845-1880 MHz 25 29 dB 2110-2170 MHz 25 28 dB 2400-2422 MHz[3] - 16 dB 2422-2427 MHz 29 38 dB 2427-2460 MHz 45 50 dB 2460-2500 MHz 37 39 dB 4600-4800 MHz 28 39 dB 6900-7200 MHz 20 29 IMD3 H2 Ta=+25C Ta=-20 to +85C Integrated 2nd Harmonic 3rd Harmonic -120 dBm -35 dBm Isolation Isolation B38 Tx port to B40 Tx port 2300 to 2400 MHz 40 44 dB 2570 to 2620 MHz 35 36 dB Notes: 1. All specifications are based on the TriQuint schematic for the main reference design shown on page 4. 2. Typical values are based on average measurements at room temperature. Final Data Sheet: Rev D 10/26/2017 (c) 2015 TriQuint - 2 of 9 - Disclaimer: Subject to change without notice e www.triquint.com/www.qorvo.com (R) Not for New Designs 885043 RFMD + TriQuint = Qorvo Not for New Designs B38/B40 Tx filters Absolute Maximum Ratings Parameter Operating Rating Temperature[3] -20 to +85 oC -55 to +150 oC Storage Temperature Input Power, operating (In band, CW signal) +28 dBm[4] Notes: [3] The diplexer will function over the recommended range without degradation in reliability or permanent change in performance, but is not guaranteed to meet electrical specifications. [4] Input Power with applied CW signal at 55C for 5000 hours Reference Design - Tx - 50 SE Inputs, Antenna - 50 SE Output Schematic 1: 2 Inputs, one diplex Antenna B40Tx B38Tx Schematic 2: 2 Inputs, 2 Antenna 50 2, 3, 5, 6, 9,10 B38 Rx B40Tx B40 Rx B38Tx 4 8 1 7 L2 50 B38 ANT B40 ANT 50 L1 50 Notes: 1. Actual matching may vary due to PCB layout and parasitic Final Data Sheet: Rev D 10/26/2017 (c) 2015 TriQuint - 3 of 9 - Disclaimer: Subject to change without notice e www.triquint.com/www.qorvo.com (R) Not for New Designs 885043 RFMD + TriQuint = Qorvo Not for New Designs B38/B40 Tx filters PC Board PCB routing detail (Top view) Notes: 1. Construction: 1/2oz. Cu Top Layer, .0075 Taconic TLY-5A Dielectric, 1/2oz. Cu Middle layer, a. FR4 Dielectric, 1/2oz. Cu Bottom Layer b. Finished Board Thickness to be .062%%p.004 2. Finish plating: a. Nickel type: ASTM B733-97, Class 1, 3-8m thick, 7-9% Phosphorus b. Gold type: Immersion Gold .03-.2um 3. Hole plating: Copper min. .0008m thick Notes: 1. Dark indicates pad areas 2. This footprint represents a recommendation only 3. For solder pad recommendation see mechanical information Bill of Materials Reference Design Value Description Manufacturer Part Number Coil Wire-wound, 01005, y% Polarity TBD Murata/TDK LQP02TN5N1S02 7.5nH Coil Wire-wound, 01005, y% Polarity TBD Murata/TDK LQP02TN7N5J02 L3 2.9nH Coil Wire-wound, 0201, y% Polarity TBD Murata/TDK LQP03TN2N9B02 SMA N/A SMA Connector Radiall USA Inc. 9602-1111-018 PCB N/A 3-layer L1 L2 5.1nH Multiple Band 38 Tx Measured Performance (at room temperature) Final Data Sheet: Rev D 10/26/2017 (c) 2015 TriQuint - 4 of 9 - Disclaimer: Subject to change without notice e www.triquint.com/www.qorvo.com (R) Not for New Designs RFMD + TriQuint = Qorvo Final Data Sheet: Rev D 10/26/2017 (c) 2015 TriQuint Not for New Designs - 5 of 9 - 885043 B38/B40 Tx filters Disclaimer: Subject to change without notice e www.triquint.com/www.qorvo.com (R) Not for New Designs 885043 RFMD + TriQuint = Qorvo Not for New Designs B38/B40 Tx filters Band 40 Tx Measured Performance (at room temperature) Final Data Sheet: Rev D 10/26/2017 (c) 2015 TriQuint - 6 of 9 - Disclaimer: Subject to change without notice e www.triquint.com/www.qorvo.com (R) Not for New Designs 885043 RFMD + TriQuint = Qorvo Not for New Designs B38/B40 Tx filters Band 38/40 Tx Measured Performance (at room temperature) Final Data Sheet: Rev D 10/26/2017 (c) 2015 TriQuint - 7 of 9 - Disclaimer: Subject to change without notice e www.triquint.com/www.qorvo.com (R) Not for New Designs 885043 RFMD + TriQuint = Qorvo Not for New Designs B38/B40 Tx filters Mechanical Information Package Information, Dimensions and Marking Package Style: CSP-1713 Dimensions: 1.7 x 1.3 x 0.46 mm *75 Body: Al2O3 ceramic Lid: Kovar or Alloy 42, Au over Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2-6m Ni plating All dimensions shown are nominal in millimeters All tolerances are 0.05mm except for length and width 0.10mm The date code consists of: WW = 2 digit week, Y = Last digit of year, M = Manufacturing site code Tape and Reel Information Standard T/R size = 10,000 units/reel. All dimensions are in millimeters Final Data Sheet: Rev D 10/26/2017 (c) 2015 TriQuint - 8 of 9 - Disclaimer: Subject to change without notice e www.triquint.com/www.qorvo.com (R) Not for New Designs 885043 RFMD + TriQuint = Qorvo Not for New Designs B38/B40 Tx filters Product Compliance Information ESD Information Solderability Compatible with the latest version of J-STD-020, lead free solder, 260C Refer to Soldering Profile for recommended guidelines. ESD Rating: 3A Value: TBD. Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114 This part is compliant with EU 2002/95/EC RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). ESD Rating: C Value: TBD Test: Machine Model (MM) Standard: JEDEC Standard JESD22-A115 This product also has the following attributes: Halogen Free (Chlorine, Bromine) Antimony Free TBBP-A (C15H12Br402) Free PFOS Free SVHC Free MSL Rating Devices are Hermetic, therefore MSL is not applicable Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: www.triquint.com Email: info-sales@tqs.com Tel: Fax: +1.407.886.8860 +1.407.886.7061 Important Notice The information contained herein is believed to be reliable. TriQuint makes no warranties regarding the information contain herein. TriQuint assumes no responsibility or liability whatsoever for any of the information contained herein. TriQuint assumes no responsibility or liability whatsoever for the use of the information contained herein. The information contained herein is provided "AS IS, WHERE IS" and with all faults, and the entire risk associated with such information is entirely with the user. All information contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for TriQuint products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anything described by such information. TriQuint products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Final Data Sheet: Rev D 10/26/2017 (c) 2015 TriQuint - 9 of 9 - Disclaimer: Subject to change without notice e www.triquint.com/www.qorvo.com (R) Not for New Designs